An exact solution and a closely concurring approximate energy solution are given for the buckling of an infinitely long flat plate under combined shear and transverse direct stress with edges elastically restrained against rotation. It was found that an appreciable fraction of the critical stress in pure shear may be applied to the plate without any reduction in the transverse compressive stress necessary to produce buckling. An interaction formula in general use was shown to be decidedly conservative for the range in which it is supposed to apply.

Field measurements were made on a fighter airplane to determine the approximate magnitude of the horizontal tail loads in accelerated flight. In these flight measurements, pressures at a few points were used as an index of the tail loads by correlating these pressures with complete pressure-distribution data obtained in the NACA full-scale tunnel. In addition, strain gages and motion pictures of tail deflections were used to explore the general nature and order of magnitude of fluctuating tail loads in accelerated stalls.

"Field measurements were made on a fighter airplane to determine the approximate magnitude of the horizontal tail loads in accelerated flight. In these flight measurements, pressures at a few points were used as an index of the tail loads by correlating these pressures with complete pressure-distribution data obtained in the NACA full-scale tunnel. In addition, strain gages and motion pictures of tail deflections were used to explore the general nature and order of magnitude of fluctuating tail loads in accelerated stalls" (p. 351).

This progress report discusses activities at Hanford Engineer Works for the month of July, 1944. The organization size increased rapidly in July, jumping from 1384 to 1886, an increase of 502 employees. Shortages existed on special lines such as electricians, instrument mechanics, and power operators. The opportunities to interview and employ Construction personnel improved as the Construction, organization moved past its peak employment figure. 269 houses were completed in Richland and 370 occupancies were reported, reducing the backlog of empty houses due to slow furniture movements. A total of 1530 houses or 35.6% of the village is now occupied. The overall canning yield increased from 63% to 75% while production leveled off at approximately two-thirds of design capacity. The metal machining operation and the test pile operated on a one shift-six day per week basis. The portion of the 100-B Area from the pump house through the filter plant and including the Power House was taken over by Operations on July 25. The Power House in the 200-W Area was started and flushing of process lines with water and steam got under way in the canyon. A new department was formed to control the Protection activities of the plant.

From abstract: "The report describes the complete structure of barium hydrogen phosphate, Ba HPO4, as determined by means of x-ray diffraction. The crystal is orthorhombic, with cell dimensions given by a=5.71 A b=7.05 A c=4.61 A. The calculated density is 4.15gm/cm[^]3 for two molecules in the unit cell. The space group is C[subscript]2v[superscript]7-pmn. The barium, phosphorus, and two sets of oxygen lie in the plane of symmetry. The third set of oxygens are in general positions. Parameters for these atoms have been found, and interatomic distances calculated. The positions of the hydrogens are indicated by the characteristics O-H-O distance (2.58A) between two oxygens."

The following report calculates how many neutrons are produced by the O-16([alpha]-n) reaction in a thin and uniform polonium oxide layer.

ABSTRACT. When solutions of high specific alpha activity are to be assayed for product, it is often difficult to obtain reproducible results by diluting the solution sufficiently to remove a small volume from which a sample can be prepared and counted at 52% geometry. In order to assay such a solution, most reproducible results have been obtained with minimum effort in sample preparation by making use of low geometry chambers. Two types of low geometry chambers are described: 1) The air-screen type which reduces the geometry simply by placing screens of various transparencies above the sample; and 2) The vacuum low geometry chamber which accomplishes geometry reduction by increasing the distance between sample and collecting electrode thus decreasing the solid angle subtended by the sample and aperture through which the particles pass into the ionization chamber. This type chamber was developed concurrently by this group and the instrument group of Chemistry Section C-I at the Metallurgical Laboratory. Because the geometry of the air-screen type chamber is quite critical to sample spreading and be- cause 12 mm sample plates are required, it has found very little use. On the other hand, the vacuum chamber, because it is noncritical to sample spreading …

Abstract. A method for calculating jacket temperatures in a region of varying heat transfer coefficients is given Some applications are made for temperatures above a supporting rib.

From introductory paragraph: "In a slightly hypocritical water boiler the introduction of a single neutron may give rise to a fairly large burst of neutrons which dies out slowly. As was shown some time ago by Frankel and Nelson with the help of A. Horn the statistics of this multiplication process can be treated in a simple way for the hypothetical case that the number of neutrons produced per fission is two."