This barely legible document describes the canning process, autoclave tests, slug weight distributions, and general information on progress in the 100 Area to include: Reactor physics, corrosion, instrument development, plant assistance, slug recovery, outgassing, sniffer tests, statistics, and analytical services.

Abstract. Wigner effects on aluminum, beryllium, and tuballoy have been studied by the electrical resistance method. Samples were exposed during an interval which would have produced an increase of approximately 22% in resistance of AGOT-K graphite. The resistance of tuballoy increased approximately 1%. It is shown that the increase can be accounted for by the amount of fission product impurity formed during the exposure. Neither aluminum nor beryllium showed any change. In the case of Be, the Wigner effect may be obscured, to some extent, by the approximately .2 - .3 atom % of impurity present in the samples. Based on the increase occurring in ADOT-K graphite, a change of approximately .2 - .5 x10-6 ohm-om might be expected in the case of Be. The accuracy of the method was sufficiently great to detect a change of this magnitude. Other experiments with Be will be undertaken when purer samples are available. Meanwhile, some samples of the present type ae being subjected to further irradiation.

Abstract: "The advantages of high scaling ratios in counting random pulses are discussed. The mechanism of the basic circuit used in the Columbia University scaling circuits is described. The difficulties experienced in the performance of the earlier circuits are indicated and modified circuits to eliminate these difficulties are given. Precautions that must be observed in carrying out the constructional details are suggested. The complete circuit and specifications are given in detail for a Scale of 128 for use with linear-amplifier systems" (p. 1).

In order to obtain a correlation of drag data from wind-tunnel and flight tests at high Mach numbers, a typical pursuit airplane, with the propeller removed, was tested in flight at Mach numbers up to 0.755, and the results were compared with wind-tunnel tests of a 1/3-scale model of the airplane. The tests results show that the drag characteristics of the test airplane can be predicted with satisfactory accuracy from tests in the Ames 16-foot high-speed wind tunnel of the Ames Aeronautical Laboratory at both high and low Mach numbers. It is considered that this result is not unique with the airplane.

None

This memorandum describes a trip on February 17th, 1944, in which the author stopped at the Baker Brothers Machine Company in Toledo to get the latest information on machining speeds and feeds and to determine the validity of their reported three pieces per hour per machine. The Baker Brothers reported that the three pieces per hour figure is an average given for determining delivery dates and allows for machining shapes other than a straight cylinder. They recommended a speed of 360 RPM for turning with a .010 feed.

Abstract. The effect of various inhibitors on the production of CrIII in W waters containing chromatic has been studies at a variety of pH's in the CP-3 pile. The addition of 2 ppm NaClO3 appears to have little effect a a pH of 5.3, but 2 ppm NaClO3 cr 0.15 ppm of Cl2 (in the form of NaOCl) somewhat decreases the amount of chromatic reduced at a pH of 7.1. The inhibition is not great enough, however, to reduce the amount of CrIII formed to the maximum concentration permissible at W (0.02 ppm). The addition of 3 ppm (NH4)2S2O3 as an inhibiter will permit W water to be used a a Ph of 7.0, but not at a pH of 6.5 as far as chromate reduction is concerned. The concentration of CrIII would be 0.01 ppm and 0.05 ppm, respectively, after one passage through the pile. Previous conclusion as to the effects of temperature, pH, intensity and the addition of ammonium persulfate, which had been reached from experiments with simulation W water, have been checked by studies with solutions made from water chipped directly from Hanford. All of the effects noted were found to be similar to those already reported, …