Memorandum presenting a description of the hydrodynamic lift theory of supporting services. This report is mainly about the task of finding suitable wing sections for given lift conditions. Formulas are given for lift magnitude and moment, which make it possible to obtain solutions of great simplicity and clearness.

The tests at the Gottingen laboratory included: friction tests on a surface treated with emaillite, verification tests on the M.V.A. 356 wing, and comparative tests of wing no. 36 at the Eiffel laboratory. The examination of all these experiments leads to the belief that, at large incidences, the speeds registered by the suction manometer of the testing chamber of the Eiffel laboratory wind tunnel are, owing to pressure drop, greater than the actual speeds. Therefore, the values of k(sub x) and k(sub y) measured at the Eiffel laboratory at large incidences are too low.

Report presenting a description of fluid compasses that are being used in aircraft, including why magnetic compasses are not usable. Details of the distant compass are provided, which is an improved form of the compass that has a practical application in seaplanes.

Report issued by the U.S. Bureau of Mines on the characteristics and behavior of oil and coal distillation processes. The effectiveness of the distillation processes and the properties of the oil and coal mixtures are presented. This report includes tables, graphs, and illustrations.

This report presents a method of calculating polar curves which is at least as precise as graphical methods, but it more rapid. Knowing the wind tunnel test of a wing and the performances of an airplane of the same profile, it is easy to verify the characteristic coefficients and, at the same time, the methods determining induced resistances.

This report presents a discussion of how to determine the location of a line or surface from experimental data. What we desire to know practically is the number of ordinates required to obtain a certain probable precision in drawing a line or surface.

"On April 15, 1920, the under Secretary of State for Aeronautics and Aerial Transport decided to adopt as Standard Atmosphere for official airplane tests in France, the atmosphere defined by the following law, known as the Law of the S.T.You.(Technical Section of Aeronautics): From 0 to 11,000 m. - 0=15-0.0065 Z and above 11,000 m. - 0= -56.5 degrees being the temperature in centigrade degrees at altitude Z expressed in meters. For altitude 0 the pressure is 760 mm of mercury. In the magazine "L'Aeronautique" Mr. A. Toussaint has already written at length on the first studies which led to the elaboration of this law. Since that time the results obtained have been confirmed by fuller and more abundant data which have justified the official adoption of the Law of the S.T.Ae" (p. 1).

A method is presented for soldering aluminum to other metals. The method adopted consists of a galvanic application to the surface of the light-metal parts to be soldered, of a layer of another metal, which, without reacting electrolytically on the aluminum, adheres strongly to the surface to which it is applied, and is, on the other hand, adapted to receive the soft solder. The metal found to meet the criteria best was iron.

Report issued by the Bureau of Mines covering petroleum laws of the U.S. and surrounding oil producing countries. As stated in the preface, "this bulletin includes the petroleum laws of (1) United States; (2) the several oil-producing States; (3) Canada; (4) Mexico; (5) the Republics of Central and South America" (p. iv).

"The proposed device tends to render the lateral stabilization of airplanes easier and more efficacious. The proposed solution is to mount the ailerons independently, in such a manner that they can turn freely, under the action of the relative wind, about an axis located in front of the extreme position of the center of the lift" (p. 1).

This report examines the idea of coupling numerous engines together to turn a single propeller, which the author feels would free aircraft design from the problems of multi-engine and propeller design.

This review of commercial aviation includes postal delivery, package transport, and passenger transport. Both airplanes and airships are covered in this review.

As the purpose of the report is to transmit as smoothly and as easily as possible, certain facts and ideas, to the average person likely to read it, it should be written in a full and simple enough manner to be comprehended by the least tutored, and still not be boring to the more learned readers.

Different aircraft engines are categorized as being of interest to only the Army or Navy or to both armed services. A listing of the different engines is presented along with some statistics, namely, horsepower.

This report details the Rumpler Limousine which was a further development of the well known type 5 A 2. The fuselage, engine, cabin, wings, controls, and landing gear are all discussed.

Though dissimilar, these two subjects have been united because they have some points in common. The computation of the movement of an airplane can only be correctly established if we are in a position to know exactly the thrust and resisting torque of the propeller for the various values of slip, which may vary greatly according to circumstance. The first part of the work concerns propellers and introduces as a fundamental variable, the true slip (delta) with respect to the effective pitch, which is the advance per revolution of the propeller corresponding to no thrust. The second part deals with characteristic curves of an airplane.

Report presenting tariffs that are written for all aircraft manufacturing companies to follow regarding aircraft orders.

The abolition of military qualifications gives free scope to new technical possibilities in the development of transport airplanes. This report notes the various considerations that must be made when designing aircraft to meet the needs of commercial passengers. Comfort and safety must be emphasized.

Report presenting a description of a meeting of the German Scientific Association for Aeronautics. The topics that were discussed are described.

This report presents a series of tests conducted to verify the formula for thrust P = q(exp 2) D(exp 2) V(exp 2), where P represents thrust, V the velocity of the airstream, D the diameter of the propeller, and q the lifting quality of a comparative propeller which is called the conjugate propeller.

Report presenting a description of the transition stage of airplanes and how it will change with new developments in aircraft design. The details of the debate between centralized or decentralized installation are also provided, including some of the pros and cons of each.

This report details the rules and regulations for obtaining a British airworthiness certificate. Aircraft loading and construction are especially important.

To obtain the absolute velocity of an airship by knowing the speed at which two routes are covered, we have only to determine the geographical direction of the routes which we locate from a map, and the angles of routes as given by the compass, after correcting for the variation (the algebraical sum of the local magnetic declination and the deviation).

Report presenting a description of the interaction between the dynamometer hub and the flywheel of the engine in aircraft. The negative rotary moments in propellers generally allow for the cessation of one cylinder without any lifting on the part of the propeller, and without depriving the engine of its flywheel.