Report issued by the U.S. National Bureau of Standards discussing information on data entry equipment selection by Federal agencies and organizations. As stated in the abstract, "this report provides information about economic and general operational considerations, steps to be followed in acquisition and training, and other factors pertinent to data entry equipment selection" (p. iii). This report includes a table.

Report documenting standard x-ray diffraction powder patterns for various compounds, intended to replace previous data or provide information for new substances. It describes the methods and, for each substance, outlines any previous data as well as information about the sample used and structural data, with a table of diffraction patterns.

From Abstract: "This plan was commissioned to provide a framework for the development of all essential non-nuclear energy-related, environmental, safety, and health (ES&H) standards for the private sector to coincide with the commercialization of energy technologies."

Report issued by the U.S. National Bureau of Standards discussing an analysis of seismic design provisions for buildings with three main objectives. As stated in the introduction, "The first objective was to assist the ATC in the preparation of its report. The second objective of the study was to augment the text of the published Provisions by providing a formal, consistent documentation of the text. The third objective was to provide alternate arrangements of the Provisions that would make them more readily usable by several categories of users" (p. 1). This report includes illustrations.

From Introduction: "The first part of this monograph is concerned with the analysis of closed region wave-guide junction problems. This allows simplification of the techniques to be used since no branch cuts are involved in the spectral representation of the fields. However, the analysis can be extended to open region problems in a logical manner. This is the subject of the second part of this monograph."

Report issued by the U.S. National Bureau of Standards discussing the construction of large electromagnetic cells. As stated in the introduction, "this instruction provides information and procedures necessary to fabricate a large transverse electromagnetic (TEM) cell to be used for experimental "electromagnetic interference" (EMI) evaluation studies" (p. 1). This report includes illustrations, and photographs.

Report discussing the philosophy of measurement assurance and the three levels of measurement assurance programs. The measurement assurance programs are outlined to show how control over the measurement process can be maintained and how the offset (or systematic error) from the unit of length maintained by the National Bureau of Standards ban be made negligible. This monograph is intended for those who need to know on a continuing basis the uncertainty of their gage block calibration procedure.

Report issued by the Bureau of Mines discussing the heating and cooling requirements for single-family homes. These requirements are determined from "Test Reference Year," or TRY data and long-term geographic climate information. This report includes tables, illustrations, photographs, and a map.

Report issued by the U.S. National Bureau of Standards discussing the System Management Facilities for IBM systems. As stated in the introduction, "the purpose of SMF, as stated in the IBM manual, is to provide the means for gathering and recording information that can be used for billing customers or evaluating system usage" (p. 1). This report includes tables, and illustrations.

Report documenting standard x-ray diffraction powder patterns for various compounds, intended to replace previous data or provide information for new substances. It describes the methods and, for each substance, outlines any previous data as well as information about the sample used and structural data, with a table of diffraction patterns.

Report issued by the Bureau of Standards discussing the energy conservation of public buildings. As stated in the introduction, "this report focuses on the establishment of a technically correct, practical, standardized approach for evaluating proposed energy conservation improvements in public buildings" (p. 2). This report includes tables, illustrations, and photographs.

Report issued by the U.S. National Bureau of Standards discussing building codes and standards in earthquake-prone areas. As stated in the introduction, "the basic purpose of this project is to present, in one comprehensive document, current state-of-knowledge in the fields of engineering seismology and engineering practice as it pertains to seismic design and construction of buildings" (p. 1). This report includes tables, and illustrations.

From Abstract: "This monograph deals with the formulation and development of the new highly stable nickel-base thermocouple alloys Nicrosil (Ni-14.2Cr-1.4Si) and Nisil (Ni-4.4Si-0.1Mg) under the leadership of the Materials Research Laboratories (MRL) of the Australian Government of Defence, and their standardization by the National Bureau of Standards (NBS) of the U.S. Department of Commerce."

Book presenting an introduction to time, timekeeping, and the uses of time information, especially in the scientific and technical areas. Serves as introductory text for laymen.

Report issued by the U.S. National Bureau of Standards discussing specifications of reflectance and proposed nomenclature. As stated in the introduction, "this monograph presents a unified approach to the specification of reflectance in relation to the beam geometry of both the incident and the reflected flux in any reflectometer or in any application of measured reflectance data" (p. 1). This report includes illustrations.

Report presenting a unified approach to the specification of reflectance, in terms of both incident- and reflected- beam geometry. Nomenclature to facilitate this approach is proposed. Nomenclature for categorizing and specifying reflectance quantities for a variety of different beam configurations (both incident and reflected beams) is described, and all are defined and interrelated in terms of the bidirectional reflectance-distribution function. The conditions under which the formalism can be applied, including situations involving considerable sub-surface scattering, are carefully established. The entire treatment is limited to the domain of classical geometrical-optics radiometry and does not take into account interference and diffraction phenomena, such as are frequently encountered with highly coherent radiant flux.

Report documenting standard x-ray diffraction powder patterns for various compounds, intended to replace previous data or provide information for new substances. It describes the methods and, for each substance, outlines any previous data as well as information about the sample used and structural data, with a table of diffraction patterns.

From Introduction: "This paper describes some results of the first eight years of a fifteen year program in which a variety of coating and catholic protection systems are evaluated on their ability to protect steel piles in offshore conditions at Dam Neck, Virginia. It includes a description of the methods used in the evaluation and the results found on these systems."

From Abstract: "This publication attempts to diminish the incidence of stress corrosion failures by assembling the available practical measures to avoid or minimize the problem and present these measures in a form comprehensible to those persons responsible for the design, fabrication, and maintenance of new structures."

From Abstract: "This document is a review of the principles, procedures, and instruments used in the measurement of visual range. The fundamental concepts of the visual range of the objects and lights are discussed. The principles of operation of the several classes of atmospheric attenuation meters are reviewed and representative instruments are described."

Report issued by the U.S. National Bureau of Standards discussing the use of metric units of measurement during construction. As stated in the scope, "this document outlines a selection of SI units, with multiples and sub-multiples, for general use in building design and construction" (p. 1). This report includes tables, and illustrations.

Report presenting the formulae for the calculation of the electron scattering form factors, and of the static magnetic dipole and electric quadrupole moments, of relativistic many-body bound systems. The framework, given in NBS Monograph 147, is relativistic quantum field theory in the Schrodinger picture ; the physical particles, i.e. the solutions of the interacting fields, are given as linear combinations of the solutions of the free fields, called the parton fields. The parton-photon interaction is taken as given by minimal coupling, p -> p - eA ; in addition the contribution of the photon-vector meson vertex of the vector dominance model is derived.

Letter from the acting director of the U.S. National Bureau of Standards introducing the materials in the NBS Metric Kit. The kit was compiled to support the Metric Conversion Act, signed in December 1975, which would convert measurements used in the United States to the metric system of measurement. Includes an order form for additional materials and the metric kit envelope.

Kit issued by the U.S. National Bureau of Standards containing materials regarding conversion to the metric system of measurement. The kit includes a letter of introduction; an order form; two plastic cards printed with rulers and conversion information; and four booklets that discuss how the metric system is different from the English system of measurement, why America should switch, and reference materials for converting.