Abstract: The problem of measuring and characterizing complicated multiple-source, multiple-frequency electromagnetic environments is becoming more important and more difficult as electrical devices proliferate. This paper outlines three general approaches to the problem which are currently under investigation at the National Bureau of Standards. The three approaches are: 1) a statistical treatment of the spatial distribution of electromagnetic field intensities, 2) a numerical computation using a finite-difference (or lattice) form of the electromagnetic action functional, and 3) use of a directional probe to scan a volume. All three methods are still in the development stage, but each appears promising.

Abstract: In electromagnetic susceptibility testing of electronic equipment, the ideal incident field is a plane wave. To approximate this condition, a seven-element array of Yagi-Uda antennas has been constructed and tested at a frequency of 500 MHz. The element weightings are determined by a near-field synthesis technique which optimizes the uniformity of the field throughout a rectangular test volume in the near field of the array. The amplitude and phase of the electric field have been measured throughout the test volume with a short dipole probe, and the agreement with the theory is excellent.

Abstract: An expression is developed for net power delivered to a load in terms of the indicated forward and reflected power and the system S-parameters and reflection coefficients. The dual directional coupler is treated as nonideal with power reflections assumed between all ports. The system itself is used to evaluate the major S-parameter terms in net power computation, and uncertainty in the computed power is derived from origins in the power meter readings and incompletely known S-parameters.

From abstract: This paper presents the conflicts in the design and gives a solution. The complete evaluation requires assembly of the proposed apparatus to assess final accuracy.

From introduction: In this report the following will he discussed: (1) design consideration of the broadband magnetic field sensor, (2) overall design of the magnetic field meter, (3) performance of the meter, (4) calibration and operating procedures, (5) alignment and adjustment procedures, and (6) summary and conclusions.

Abstract: Selected publications of the Ion Storage Group of the Time and Frequency Division, NBS, Boulder, Colorado.

Abstract: A general theoretical approach is formulated to describe the complex electromagnetic environment of an N-element array. The theory reveals the element-to-element interactions and multiple reflections within the array. From the formulation, it is found that the interaction between an excited element and an open-circuited element can be viewed as the sum of terms describing all possible signal paths within the array environment which start from the radiating element and terminate on the element under observation. Within all paths except the most direct one, multiple reflections between subgroups of elements take place. The resulting solution is highly structured and recursive and is discussed in detail in the text. Illustrative examples are provided to facilitate understanding of these ideas.

Abstract: Custody transfer tables are presented for oxygen, argon, nitrogen, helium, and hydrogen. The tables are based on standard reference data previously compiled by the National Bureau of Standards. Two sets of tables are provided for each fluid. Tables in engineering units cover the range -40 to 130*F with pressures from 100 to 10,000 prig. Tables in SI units (density versus pressure and temperature) cover the range 200 to 370 K with pressures from 0.5 to 70 MPa. The tables in engineering units are designed to provide a means of determining the volume of gas at standard conditions contained in a tank given the volume of the tank and the pressure and temperature of the gas within the tank. The publication also includes four examples of use of the tables in calculating tank quantities.

The following report describes scratch standards--a cosmetic standard--and studies on etched gratings that were made to replace submasters and redefine scratch standards.

From abstract: I propose the use of a template method for quantitative, correct, and transparent measurement of signal power to additive noise power ratios (SNR) of digital signals and systems under full operating conditions. Outer guard chips of digital templates hold intersymbol interference fixed on inner target chips in realizations of the respective template patterns in traffic. The proposed template method needs to be developed and proven as a potentially valuable metrology capability; it can be especially important for real time online performance assessment and monitoring of digital communication systems.

Abstract: Results of a research program to develop fitness-for-service criteria for assessing the significance of fatigue cracks in offshore structures are presented in five papers. Each paper describes the goals and approaches to a specific task and details the results of the study.

Abstract: Site attenuation is a measure of performance of an open test site used at frequencies below about 1 GHz for antenna calibration and equipment emission and susceptibility testing. These sites typically consist of a large, obstruction-free ground plane and the hemisphere above it. Site attenuation of an ideal site is calculated and compared to data measured using the 30 m by 60 m NBS ground screen.

Abstract: The preliminary design and testing of a planar circuit six-port with diode detectors is described. The planar circuit medium was chosen to be finline, and all preliminary work was done in WR-42 waveguide (18-26.5 GHz). The finline substrate was alumina, and initially commercial beam-lead diodes were bonded to the finline metalization. The goal is to design an integrated circuit which could be fabricated on one chip (with diode detectors) and used as part of a six port network analyzer in the waveguide bands above 18 GHz. Initial designs proved to b unsatisfactory because of high losses and reflections. Most of the problems have b en solved, and a usable integrated finline circuit is a good possibility for a millimeter wave six-port.

from Introduction: The National Bureau of Standards has designed, constructed, and evaluated a standard for the support of very-high-frequency omnidirectional range (VOR) air navigation aids. The standard consists of two instruments: (1) a digital waveform signal generator for the composite VOR audio waveform, and (2) a standard phasemeter based on time series analysis of this waveform. Experimental results, a statistical analysis of them, and the principal software listings are included.