The following report describes scratch standards--a cosmetic standard--and studies on etched gratings that were made to replace submasters and redefine scratch standards.

Card listing corrections to several data points documented in a previous technical report, titled "An Equation of State for Fluid Ethylene."

Abstract: The problem of measuring and characterizing complicated multiple-source, multiple-frequency electromagnetic environments is becoming more important and more difficult as electrical devices proliferate. This paper outlines three general approaches to the problem which are currently under investigation at the National Bureau of Standards. The three approaches are: 1) a statistical treatment of the spatial distribution of electromagnetic field intensities, 2) a numerical computation using a finite-difference (or lattice) form of the electromagnetic action functional, and 3) use of a directional probe to scan a volume. All three methods are still in the development stage, but each appears promising.

Abstract: In electromagnetic susceptibility testing of electronic equipment, the ideal incident field is a plane wave. To approximate this condition, a seven-element array of Yagi-Uda antennas has been constructed and tested at a frequency of 500 MHz. The element weightings are determined by a near-field synthesis technique which optimizes the uniformity of the field throughout a rectangular test volume in the near field of the array. The amplitude and phase of the electric field have been measured throughout the test volume with a short dipole probe, and the agreement with the theory is excellent.

Abstract: An expression is developed for net power delivered to a load in terms of the indicated forward and reflected power and the system S-parameters and reflection coefficients. The dual directional coupler is treated as nonideal with power reflections assumed between all ports. The system itself is used to evaluate the major S-parameter terms in net power computation, and uncertainty in the computed power is derived from origins in the power meter readings and incompletely known S-parameters.

From abstract: This paper presents the conflicts in the design and gives a solution. The complete evaluation requires assembly of the proposed apparatus to assess final accuracy.

From introduction: In this report the following will he discussed: (1) design consideration of the broadband magnetic field sensor, (2) overall design of the magnetic field meter, (3) performance of the meter, (4) calibration and operating procedures, (5) alignment and adjustment procedures, and (6) summary and conclusions.

Abstract: Selected publications of the Ion Storage Group of the Time and Frequency Division, NBS, Boulder, Colorado.

Abstract: A general theoretical approach is formulated to describe the complex electromagnetic environment of an N-element array. The theory reveals the element-to-element interactions and multiple reflections within the array. From the formulation, it is found that the interaction between an excited element and an open-circuited element can be viewed as the sum of terms describing all possible signal paths within the array environment which start from the radiating element and terminate on the element under observation. Within all paths except the most direct one, multiple reflections between subgroups of elements take place. The resulting solution is highly structured and recursive and is discussed in detail in the text. Illustrative examples are provided to facilitate understanding of these ideas.

Abstract: Custody transfer tables are presented for oxygen, argon, nitrogen, helium, and hydrogen. The tables are based on standard reference data previously compiled by the National Bureau of Standards. Two sets of tables are provided for each fluid. Tables in engineering units cover the range -40 to 130*F with pressures from 100 to 10,000 prig. Tables in SI units (density versus pressure and temperature) cover the range 200 to 370 K with pressures from 0.5 to 70 MPa. The tables in engineering units are designed to provide a means of determining the volume of gas at standard conditions contained in a tank given the volume of the tank and the pressure and temperature of the gas within the tank. The publication also includes four examples of use of the tables in calculating tank quantities.

From abstract: The thermophysical and transport properties of selected fluids have been programmed in FORTRAN 77 which is available for micro computers. The input variables are any two of P, p, T (pressure, density, and temperature) in the single phase regions, and either P or T for the saturated liquid or vapor states. The output is pressure, density, temperature, internal energy, enthalpy, entropy, specific heat capacities (Cp and Cv), speed of sound and, in most cases, viscosity, thermal conductivity and dielectric constant.

From abstract: I propose the use of a template method for quantitative, correct, and transparent measurement of signal power to additive noise power ratios (SNR) of digital signals and systems under full operating conditions. Outer guard chips of digital templates hold intersymbol interference fixed on inner target chips in realizations of the respective template patterns in traffic. The proposed template method needs to be developed and proven as a potentially valuable metrology capability; it can be especially important for real time online performance assessment and monitoring of digital communication systems.

From abstract: This paper describes a Bessel null technique to measure the frequency response of a frequency-modulated rf carrier and a program to automate frequency response measurements of signal generators with output frequencies from 0.450 to 2000 MHz. The measurements obtained using this technique are more precise than those obtained by a highly trained technician using a manual system.

Abstract: Electroexplosive devices (EEDs) are electrically fired explosive initiators used in a wide variety of applications. The nature of most of these applications requires that the devices function with near certainty when required and remain inactive otherwise. Recent concern with pulsed electromagnetic interference (EMI) and nuclear electromagnetic pulse (EMP) made apparent the lack of methodology for assessing EED vulnerability. A new and rigorous approach for characterizing EED firing levels is developed in the context of statistical linear models and is demonstrated in this paper. We combine statistical theory and methodology with thermodynamic modeling to determine the probability that an EED, of a particular type, fires when excited by a pulse of a given width and amplitude. The results can be applied to any type of EED for which the hot-wire explosive binder does not melt below the firing temperature. Included are methods.for assessing model validity and for obtaining probability plots, called "Firing Likelihood Plots". A method of measuring the thermal time constant of an EED is given. This parameter is necessary to evaluate the effect of a train of pulses. These statistical methods are both more general and more efficient than previous methods for EED assessment. The results provide information …

Abstract: Shielding effectiveness relates to a material's ability to reduce the transmission of propagating fields in order to electromagnetically isolate one region from another. Because a complex material's shielding capability is difficult to predict, it often must be measured. A number of measurement approaches are studied including the use of a shielded room, coaxial transmission line holders, time domain signals, the dual TEM cell, and an apertured TEM cell in a reverberation chamber. In each case, we consider the system's frequency range, test sample requirements, test field type, dynamic range, time required, analytical background, and present data taken on a common set of materials.

Abstract: Results of a research program to develop fitness-for-service criteria for assessing the significance of fatigue cracks in offshore structures are presented in five papers. Each paper describes the goals and approaches to a specific task and details the results of the study.

Abstract: Site attenuation is a measure of performance of an open test site used at frequencies below about 1 GHz for antenna calibration and equipment emission and susceptibility testing. These sites typically consist of a large, obstruction-free ground plane and the hemisphere above it. Site attenuation of an ideal site is calculated and compared to data measured using the 30 m by 60 m NBS ground screen.

Abstract: The preliminary design and testing of a planar circuit six-port with diode detectors is described. The planar circuit medium was chosen to be finline, and all preliminary work was done in WR-42 waveguide (18-26.5 GHz). The finline substrate was alumina, and initially commercial beam-lead diodes were bonded to the finline metalization. The goal is to design an integrated circuit which could be fabricated on one chip (with diode detectors) and used as part of a six port network analyzer in the waveguide bands above 18 GHz. Initial designs proved to b unsatisfactory because of high losses and reflections. Most of the problems have b en solved, and a usable integrated finline circuit is a good possibility for a millimeter wave six-port.

Abstract: This report presents the results of work at the National Bureau of Standards, Boulder, Colorado, to carefully evaluate, document, develop (when necessary), and describe the methodology for performing radiated susceptibility/vulnerability measurements using a reverberation chamber. The report describes the reverberation chamber theory of operation, construction, evaluation, functional operation, and use for performing immunity measurements. It includes an estimate of measurement uncertainties derived empirically from test results and from comparisons with anechoic chamber measurements. Finally, it discusses the limitations and advantages of the measurement technique to assist potential users in determining the applicability for this technique to their electromagnetic compatibility (EMC) measurement needs.

Abstract: Gain and antenna parameters related to input impedance are calculated using a computer program called HVD6. This program uses well documented equations to compute these parameters for gain-standard antennas used in relative-gain or gain-transfer measurements at frequencies below 1000 MHz. The utility of this program is that it calculates gain patterns and input impedances for linear dipoles above perfect or imperfectly conducting plane ground and in free space, and for monopoles on perfectly conducting plane ground. Examples are included to illustrate the use of the program. Uncertainties in the calculated parameters are estimated to be less than those of the measured parameters.

From abstract: The material included in this report is intended for a short course on electromagnetic compatibility/interference (EMC/EMI) metrology to be offered jointly by the staff of the Fields Characterization Group (723.03) and the Interference Characterization Group (723.04) of the Electromagnetic Fields Division (723). The purpose of this short course is to present a review of some of the radiated EMC/EMI measurement methods, to which the National Bureau of Standards (NBS) at Boulder, Colorado, has made significant contributions during the past two decades.

From introduction: The purpose of this Technical Note is to describe refracted-ray scanning in detail, to analyze it as a measurement system, to document a particular system for implementing it, and to show some exemplary results.

Abstract: The input impedance of a probe antenna exciting a transverse electromagnetic (TEM) transmission line cell is formulated by a variational approach. The formulation also utilizes the results from a previous work on the field distribution inside a TEM cell excited by a vertical electrical Hertzian dipole. The final result of imoedance is shown to consist of two distinct terms, which are respectively contributed by the ordinary rectangular waveguide and the gap perturbation. Numerical results for both the real and imaginary parts of the impedance are given. The resistive part is found to be proportional to the square of the probe length, and the reactive part largely capacitive.

Abstract: Automated time-difference measurements at the picosecond level have been achieved. The system described combines the best properties of three common methods: the single heterodyne measurement technique, the frequency divider, and the dual-mixer time-difference measurement system. This particular system combines two instrumentation standards, ANSI/IFEE-583 and ANSI/IEEE-488 with new, modular dual-mixer time-difference measurement hardware. The modular, standardized hardware together with the new measurement techniques permit the data acquisition modules to be contained in a standard CAMAC crate. This system, along with an external controller, is capable of measuring eiqht clocks, at the present time, and is expandable to twenty-four clocks with modified software and additional measurement modules. The system noise performance is described by a (rT = 3 x 10^-12 t^-1 for time difference measurements.