Report issued by the U.S. National Bureau of Standards discussing the construction of large electromagnetic cells. As stated in the introduction, "this instruction provides information and procedures necessary to fabricate a large transverse electromagnetic (TEM) cell to be used for experimental "electromagnetic interference" (EMI) evaluation studies" (p. 1). This report includes illustrations, and photographs.

Abstract: The input impedance of a probe antenna exciting a transverse electromagnetic (TEM) transmission line cell is formulated by a variational approach. The formulation also utilizes the results from a previous work on the field distribution inside a TEM cell excited by a vertical electrical Hertzian dipole. The final result of imoedance is shown to consist of two distinct terms, which are respectively contributed by the ordinary rectangular waveguide and the gap perturbation. Numerical results for both the real and imaginary parts of the impedance are given. The resistive part is found to be proportional to the square of the probe length, and the reactive part largely capacitive.

Abstract: Automated time-difference measurements at the picosecond level have been achieved. The system described combines the best properties of three common methods: the single heterodyne measurement technique, the frequency divider, and the dual-mixer time-difference measurement system. This particular system combines two instrumentation standards, ANSI/IFEE-583 and ANSI/IEEE-488 with new, modular dual-mixer time-difference measurement hardware. The modular, standardized hardware together with the new measurement techniques permit the data acquisition modules to be contained in a standard CAMAC crate. This system, along with an external controller, is capable of measuring eiqht clocks, at the present time, and is expandable to twenty-four clocks with modified software and additional measurement modules. The system noise performance is described by a (rT = 3 x 10^-12 t^-1 for time difference measurements.

Abstract: This paper describes the theory of a single sensor to perform simultaneous electric and magnetic near-field measurements. The theory indicates that it is possible to obtain the magnetic-loop and electric-dipole currents using a loop terminated with identical loads at diametrically opposite points. The theory also indicates that it is possible to obtain an ideal load impedance for achieving equal electric and magnetic field responses of the loop. Preliminary experiments have been performed using plane waves to verify these results. Key words: electric field, electromagnetic interference, electromagnetic radiation, loop, magnetic field, near fields.

From introduction: The fabrication of various iris-fed millimeterwave rectangular microstrip patch antennas is described. A model is proposed to describe the iris-fed antenna. Irises ranging in size from 15 percent of the area of the patch to the fully open waveguide are used to couple energy into the antenna. Resonance of the antenna is observed to be insensitive to the size of the iris for irises up to 115 percent of the size of the patch. A study is also made of th? relationship of coupling to the antenna as a function of position of the iris with respect to the transverse plane of the waveguide, the iris always being centered with respect to the patch. In general, the antenna has a VSWR in the waveguide feed on the order of 5:1 at resonance, except for the fully open waveguide which gives rise to a VSWR of 2.9:1 at resonance. Far-field antenna power patterns are observed to be quite broad with H-plane beamwidths on the order of 1300. Maximum antenna gain is seen to be 4.5 dBi with 3 dBi typical. An initial study is made of the microstrip patch antenna fed from a longitudinal waveguide wall. Results indicate that …

from Introduction: The measurement accuracy of the optical time-domain reflectometer (OTDR) is restricted in some applications by a limited operational dynamic range and by a lack of standardized test procedures. In an effort to better understand these restrictions, we have measured the range of linearity of some avalanche photodiodes used as backscatter detectors. Also, the effect of input launch conditions is examined and a possible standardized OTDR test procedure is proposed. Using these suggestions, we have made comparisons between attenuation values determined by cutback and backscatter methods and found that good agreement is possible. Finally, some methods are described for checking the response. linearity of OTDR systems.

Introduction: A reference step-like pulse generator is described which has been developed at NBS. This generator can be used for accurately characterizing the step response of various kinds of trap ient recording equipment (oscilloscopes, waveform recorders, transient digitizers, etc.). Basic design principles are given as well as complete circuit diagrams and descriptions. An analysis of the output stage of the generator is presented together with the circuit models for developing a time-domain computer simulation program using extended- SCEPTRE. Preliminary specifications indicate that the NBS Reference Flat Pulse Generator provides a negative-going reference transition duration (90 to 10 percent) of 600 ps, *20 percent with baseline perturbations of less than *2 percent for less than 5 ns.

From preface: STARPAC documentation is being published as a series of Technical Notes. This Note is the first in the series. It gives an overview of the STARPAC library, defines conventions used in the documentation, provides an example using STARPAC subroutines, and presents general background material. This Note includes information which is essential for using the STARPAC library, and users should be familiar with its contents before attempting to use any STARPAC subroutine.

From preface: This Note documents 16 subroutines for nonlinear least squares regression. Twelve of these compute the least squares estimates, performing either weighted or unweighted analysis with either numerically approximated or user-supplied (analytic) derivatives. The other four are user-callable subroutines for two procedures used within the estimation code: the first selects optimum step sizes for approximating the partial derivatives of the model; and the second checks the validity of a user-supplied derivative subroutine.

Abstract: A thermodynamic property formulation for ethylene, developed as a part of a joint industry-government project, is presented. The formulation includes an equation of state, vapor pressure equation, and equation for the ideal gas heat capacity. The coefficients were determined by a least squares fit of selected experimental data. Comparisons of property values calculated using the equation of state with measured values are given. The equation of state is not valid in the critical region (pc + 0.3 pc for temperatures of Tc + 0.05 Tc). Errors on the order of 20 percent for derived properties and 10 percent for density may be encountered near the critical point. Tables of the thermodynamic properties of ethylene for the liquid and vapor phases for temperatures from the freezing line to 450 K with pressures to 40 MPa are presented. The equation of state and its derivative and integral functions for calculating thermodynamic properties are included. Estimates of the accuracy of calculated properties are given. A guide for use of computer programs for the calculation of thermodynamic properties of ethylene with listings of subprograms and a sample program to illustrate the use and results of the program are included.

Abstract: The design, evaluation, and performance of a system for determining the magnitude of the transfer function (hence, the bandwidth) of a multimode optical fiber are presented. The system operates to about 1450 MHz using a tracking generator/spectrum analyzer combination for narrowband detection. It is constructed, almost entirely, from commercially available components. The system is less complex and easier to use than an equivalent time domain system and the measurement precision is comparable. Background information on time and frequency domain specifications, fiber bandwidth limitations, and alternate frequency domain techniques is also presented.

Abstract: Using a modified version of the nonanalytic equation of state, thermophysical properties of isobutane are derived from physical properties data and are tabulated at integral temperatures over the entire range of fluid states from 114 to 700 K along isobars at pressures to 70 MPa. Results include dielectric constants, densities, enthalpies, entropies, equation of state, internal energies, isobars, isochores, isotherms, Joule-Thomson inversion, heats of vaporization, melting line, orthobaric densities, specific heats, sound velocities, vapor pressures, and virial coefficients. In addition to the equation of state, equations are given for vapor pressures, orthobaric vapor and liquid densities, ideal gas properties, second virial coefficients, dielectric constants, heats of vaporization, melting pressures, and orthobaric liquid specific heats, enthalpies, and entropies. Several new sets of data have been used in this correlation; comparisons between experimental and calculated values are given.

Abstract: A review is given of the electrical resistance of materials at cryogenic temperatures. Measurement techniques, the data base, and uses of the data are presented. The emphasis is on metals and alloys of technological importance; a toxic which covers a large range of materials. Similarly, the treatment of theory and of measurement techniques is primarily for the user interested in the more practical aspects of the subject. In every instance, however, references are given which allow the reader to pursue the subject at any level.

Abstract: The problem of measuring and characterizing complicated multiple-source, multiple-frequency electromagnetic environments is becoming more important and more difficult as electrical devices proliferate. This paper outlines three general approaches to the problem which are currently under investigation at the National Bureau of Standards. The three approaches are: 1) a statistical treatment of the spatial distribution of electromagnetic field intensities, 2) a numerical computation using a finite-difference (or lattice) form of the electromagnetic action functional, and 3) use of a directional probe to scan a volume. All three methods are still in the development stage, but each appears promising.

Abstract: In electromagnetic susceptibility testing of electronic equipment, the ideal incident field is a plane wave. To approximate this condition, a seven-element array of Yagi-Uda antennas has been constructed and tested at a frequency of 500 MHz. The element weightings are determined by a near-field synthesis technique which optimizes the uniformity of the field throughout a rectangular test volume in the near field of the array. The amplitude and phase of the electric field have been measured throughout the test volume with a short dipole probe, and the agreement with the theory is excellent.

Abstract: An expression is developed for net power delivered to a load in terms of the indicated forward and reflected power and the system S-parameters and reflection coefficients. The dual directional coupler is treated as nonideal with power reflections assumed between all ports. The system itself is used to evaluate the major S-parameter terms in net power computation, and uncertainty in the computed power is derived from origins in the power meter readings and incompletely known S-parameters.

From abstract: This paper presents the conflicts in the design and gives a solution. The complete evaluation requires assembly of the proposed apparatus to assess final accuracy.

From introduction: In this report the following will he discussed: (1) design consideration of the broadband magnetic field sensor, (2) overall design of the magnetic field meter, (3) performance of the meter, (4) calibration and operating procedures, (5) alignment and adjustment procedures, and (6) summary and conclusions.

Abstract: Selected publications of the Ion Storage Group of the Time and Frequency Division, NBS, Boulder, Colorado.

Abstract: A general theoretical approach is formulated to describe the complex electromagnetic environment of an N-element array. The theory reveals the element-to-element interactions and multiple reflections within the array. From the formulation, it is found that the interaction between an excited element and an open-circuited element can be viewed as the sum of terms describing all possible signal paths within the array environment which start from the radiating element and terminate on the element under observation. Within all paths except the most direct one, multiple reflections between subgroups of elements take place. The resulting solution is highly structured and recursive and is discussed in detail in the text. Illustrative examples are provided to facilitate understanding of these ideas.

Abstract: Custody transfer tables are presented for oxygen, argon, nitrogen, helium, and hydrogen. The tables are based on standard reference data previously compiled by the National Bureau of Standards. Two sets of tables are provided for each fluid. Tables in engineering units cover the range -40 to 130*F with pressures from 100 to 10,000 prig. Tables in SI units (density versus pressure and temperature) cover the range 200 to 370 K with pressures from 0.5 to 70 MPa. The tables in engineering units are designed to provide a means of determining the volume of gas at standard conditions contained in a tank given the volume of the tank and the pressure and temperature of the gas within the tank. The publication also includes four examples of use of the tables in calculating tank quantities.

The following report describes scratch standards--a cosmetic standard--and studies on etched gratings that were made to replace submasters and redefine scratch standards.

Abstract: A method is presented for determining the impulse and step responses of a shielded cable using time domain terminal measurements and a physically based mathematical model for the transmission line properties of the cable. The method requires a computer controlled time domain measurement system and was implemented using the NBS Automatic Pulse Measurement System (APMS). Data are also developed for the frequency domain complex propagation function (attenuation and its related minimum-phase shift). The method is applied to 12 shielded paired-conductor (balanced) cables and 5 coaxial cables. Time domain responses are presented for three nominal cable lengths, 60 m (200 ft), 150 m (500 ft), and 300 m (1000 ft). The time domain responses are applied to the estimation of bit error rate increases due to the insertion of the cables into a digital signaling system employing a balanced polar NRZ waveform. Also discussed is the application of the time domain responses to time domain reflectometry techniques for cable acceptance tests and field-site testing of installed cables.

Abstract: This bibliography contains approximately 450 citations of papers concerning the characterization of optical fiber waveguides. Papers from scientific journals, trade journals and conferences are included along with book chapters. The citations of organized by parameter measured and measurement method. Where published abstracts are available they are included.