Abscissas and Weights for Guassian Quadrature For N=2 to 100, and N-125, 150, 175, 200 (open access)

Abscissas and Weights for Guassian Quadrature For N=2 to 100, and N-125, 150, 175, 200

The abscissas and weights for Gaussian Quadrature of order N = 2 to 100,and N = 125, 150, 175, and 200 are given. The abscissas are given to twenty-four places and the error is estimated to be no more than 1 unit in the last place. The weights are given to twenty-three places and the error is estimated to be no more than 1 unit in the last place.
Date: December 28, 1966
Creator: Love, Carl H.
Object Type: Report
System: The UNT Digital Library
Compiled Thermodynamic Data Sources for Aqueous and Biochemical Systems: an Annotated Bibliography (1930-1983) (open access)

Compiled Thermodynamic Data Sources for Aqueous and Biochemical Systems: an Annotated Bibliography (1930-1983)

Abstract: This is a selected and annotated bibliography of sources of compiled and evaluated chemical thermodynamic data relevant to biochemical and aqueous systems. The principal thermodynamic properties considered herein are Gibbs energy and equilibrium data, enthalpies of formation and reaction, heat capacities and entropies, and the corresponding partial molar and excess properties. Derived quantities used in calculating the above are also included. Transport and mechanical data have also been identified to a lesser degree. Included in the annotations to the data sources are brief descriptions of the types of properties tabulated, the classes of materials dealt with, and the degree of completeness of the compilations.
Date: December 1984
Creator: Goldberg, Robert N.
Object Type: Report
System: The UNT Digital Library
Computers, Health Records, and Citizen Rights (open access)

Computers, Health Records, and Citizen Rights

Report issued by the Bureau of Standards over studies on the benefits of computerized record-keeping. Medical records were chosen for the studies, and they also focus on patient privacy and rights. This report includes tables, and illustrations.
Date: December 1976
Creator: Westin, Alan F.; Baker, Michael A.; Annas, George J.; Silberberg, Richard; Broder, Jamie; Isbell, Florence et al.
Object Type: Report
System: The UNT Digital Library
Design and Error Analysis for the WR10 Thermal Noise Standard (open access)

Design and Error Analysis for the WR10 Thermal Noise Standard

From introduction: This note describes the design and error analysis of a WR10 thermal noise power standard. The standard is designed to operate at the boiling point of liquid nitrogen with a noise temperature accurate to plus or minus 1 K.
Date: December 1983
Creator: Daywitt, William C.
Object Type: Report
System: The UNT Digital Library
Facilities of the National Bureau of Standards (open access)

Facilities of the National Bureau of Standards

From forward: Every laboratory in this country is a valuable national resource. Along with the people who work in these facilities, U.S. laboratories constitute the basic foundation of this country's scientific and industrial strength. As the nation's foremost science and engineering measurement laboratory, the National Bureau of Standards has some of the premier research and testing facilities in the United States, and several of our laboratories are unequaled anywhere in the world. Bureau scientists and engineers use these special facilities to pursue the measurement-related work that U.S. science and industry need to grow and prosper. This brochure highlights only a small number of the special facilities available at NBS and provides information about their availability for collaborative or independent research and testing.
Date: December 19, 1984
Creator: United States. National Bureau of Standards.
Object Type: Report
System: The UNT Digital Library
Finline Diode Six-Port: Fundamentals and Design Information (open access)

Finline Diode Six-Port: Fundamentals and Design Information

Abstract: The preliminary design and testing of a planar circuit six-port with diode detectors is described. The planar circuit medium was chosen to be finline, and all preliminary work was done in WR-42 waveguide (18-26.5 GHz). The finline substrate was alumina, and initially commercial beam-lead diodes were bonded to the finline metalization. The goal is to design an integrated circuit which could be fabricated on one chip (with diode detectors) and used as part of a six port network analyzer in the waveguide bands above 18 GHz. Initial designs proved to b unsatisfactory because of high losses and reflections. Most of the problems have b en solved, and a usable integrated finline circuit is a good possibility for a millimeter wave six-port.
Date: December 1985
Creator: Weidman, Manly P.
Object Type: Report
System: The UNT Digital Library
From Sundials to Atomic Clocks: Understanding Time and Frequency (open access)

From Sundials to Atomic Clocks: Understanding Time and Frequency

Book presenting an introduction to time, timekeeping, and the uses of time information, especially in the scientific and technical areas. Serves as introductory text for laymen.
Date: December 1977
Creator: Jespersen, James & Fitz-Randolph, Jane
Object Type: Book
System: The UNT Digital Library
A Gage Block Measurement Process Using Single Wavelength Interferometry (open access)

A Gage Block Measurement Process Using Single Wavelength Interferometry

Report describing the interferometric measurement process using a laser light source and a Kosters type gage block interferometer. Continuous evaluation and refinement of the process is aided by statistical treatment and control chart techniques. All error sources, both random and systematic, are evaluated and the process is maintained in a state of statistical control.
Date: December 1975
Creator: Beers, John S.
Object Type: Report
System: The UNT Digital Library
Handbook of Mathematical Functions With Formulas, Graphs, and Mathematical Tables (open access)

Handbook of Mathematical Functions With Formulas, Graphs, and Mathematical Tables

A handbook of mathematical functions that is designed to provide scientific investigations with a comprehensive and self-contained summary of the mathematical functions that arise in physical and engineering problems.
Date: December 1972
Creator: Abramowitz, Milton & Stegun, Irene A.
Object Type: Report
System: The UNT Digital Library
Information Selection Systems Retrieval Replica Copies: a State-of-the-Art Report (open access)

Information Selection Systems Retrieval Replica Copies: a State-of-the-Art Report

Description of 15 specific systems employing search-type selection principles.
Date: December 31, 1961
Creator: Bagg, Thomas C. & Stevens, Mary Elizabeth
Object Type: Report
System: The UNT Digital Library
Investigation of the Hydraulics of Horizontal Drains in Plumbing Systems (open access)

Investigation of the Hydraulics of Horizontal Drains in Plumbing Systems

From introduction: "In this paper, data obtained by Hunter and by the author are reported from laboratory investigations of (1) surge flow introduced into empty simply drains, (2) attenuation of surges in simple drains, (3) continuous full-section flow in simple drains under substantially steady, uniform conditions, (4) steady flow in compound drains, and (5) surge flow introduced through a branch drain into the side or top of a main drain carrying steady flow."
Date: December 18, 1964
Creator: Wyly, Robert S.
Object Type: Report
System: The UNT Digital Library
Low Temperature Mechanical Properties Of Copper and Selected Copper Alloys: A Compilation From the Literature (open access)

Low Temperature Mechanical Properties Of Copper and Selected Copper Alloys: A Compilation From the Literature

From Abstract: "In the past 60 years considerable data have been accumulated concerning the mechanical properties of copper and its alloys.It was felt that there was great need to adequately document these results in one publication. Therefore a unique type of compilation is presented. The compilation is divided into four parts. The first section is intended for quick reference use for those who are interested in average values. The second section includes data from most of the investigators who have published results on the mechanical properties of copper and its alloys. The third section is composed of tables classifying the investigations which were not in section two. The fourth section section lists, in alphabetical order, all references used."
Date: December 1, 1967
Creator: Reed, Richard P. & Mikesell, Ritchie P.
Object Type: Report
System: The UNT Digital Library
Methods for the Dynamic Calibration of Pressure Transducers (open access)

Methods for the Dynamic Calibration of Pressure Transducers

From Introduction Statement of Objectives: "The purpose of this publication is to provide assistance to the practicing engineer who is faced with the problem of making dynamic measurements of rapidly changing pressures."
Date: December 12, 1963
Creator: Schweppe, J. L.; Eichberger, L. C.; Muster, D. F.; Michaels, E. L. & Paskusz, G. F.
Object Type: Report
System: The UNT Digital Library
Microwave Spectral Tables: [Volume 1.] Diatomic Molecules (open access)

Microwave Spectral Tables: [Volume 1.] Diatomic Molecules

From Abstract: "For about 1500 spectral lines of diatomic molecules observed by coherent radiation techniques, measured frequencies, assigned quantum numbers, and newly computed intensities are given."
Date: December 1, 1964
Creator: Wacker, Paul F.; Mizushima, Masataka; Peterson, Jean D. & Ballard, Joe R.
Object Type: Report
System: The UNT Digital Library
Microwave Spectral Tables: [Volume 2.] Line Strengths of Asymmetric Rotors (open access)

Microwave Spectral Tables: [Volume 2.] Line Strengths of Asymmetric Rotors

From Abstract: "Procedures for interpolation as a function of k and extrapolation to larger J values are discussed."
Date: December 15, 1964
Creator: Wacker, Paul F. & Pratto, Marlene R.
Object Type: Report
System: The UNT Digital Library
Report of the Thirty-Sixth National Conference on Weights and Measures, 1951 (open access)

Report of the Thirty-Sixth National Conference on Weights and Measures, 1951

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.
Date: December 10, 1951
Creator: United States. National Bureau of Standards.
Object Type: Report
System: The UNT Digital Library
Report of the Forty-Second National Conference on Weights and Measures, 1957 (open access)

Report of the Forty-Second National Conference on Weights and Measures, 1957

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.
Date: December 20, 1957
Creator: United States. National Bureau of Standards.
Object Type: Report
System: The UNT Digital Library
Report of the Forty-Third National Conference on Weights and Measures, 1958 (open access)

Report of the Forty-Third National Conference on Weights and Measures, 1958

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.
Date: December 1, 1958
Creator: United States. National Bureau of Standards.
Object Type: Report
System: The UNT Digital Library
Report of the Forty-Fourth National Conference on Weights and Measures, 1959 (open access)

Report of the Forty-Fourth National Conference on Weights and Measures, 1959

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.
Date: December 18, 1959
Creator: United States. National Bureau of Standards.
Object Type: Report
System: The UNT Digital Library
Report of the Forty-Fifth National Conference on Weights and Measures, 1960 (open access)

Report of the Forty-Fifth National Conference on Weights and Measures, 1960

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.
Date: December 16, 1960
Creator: United States. National Bureau of Standards.
Object Type: Report
System: The UNT Digital Library
Report of the Forty-Eighth National Conference on Weights and Measures, 1963 (open access)

Report of the Forty-Eighth National Conference on Weights and Measures, 1963

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.
Date: December 30, 1963
Creator: United States. National Bureau of Standards.
Object Type: Report
System: The UNT Digital Library
NBS Viscometer Calibrating Liquids and Capillary Tube Viscometers (open access)

NBS Viscometer Calibrating Liquids and Capillary Tube Viscometers

Report discussing measurements of viscosity made with relative viscometers. These instruments must be calibrated with liquids whose viscosities are known. NBS provides a series of 10 oils for this purpose. Their viscosities range from 0.02 to 450 poises and their temperature coefficients of viscosity range from 2.1 to 9.4 percent per degree C. The less viscous oils are more stable. Correction formulas for errors or conditions are presented.
Date: December 26, 1962
Creator: Hardy, R. C.
Object Type: Report
System: The UNT Digital Library
Nomograms for Obtaining the Compound Composition of Hydrated Limes from the Oxide Analysis (open access)

Nomograms for Obtaining the Compound Composition of Hydrated Limes from the Oxide Analysis

Report with two nomograms presented for rapidly obtaining the compound composition of hydrated limes from the oxide analysis. The general nomogram can be applied to any commercial hydrated lime and gives values accurate to within 0.3 percent while the special nomogram is applicable only to regularly hydrated and highly hydrated dolomitic limes and is accurate to within 0.1 percent.
Date: December 30, 1949
Creator: Levin, Ernest M.
Object Type: Report
System: The UNT Digital Library
On the Statistical Theory of Electromagnetic Waves in a Fluctuating Medium (II): Mathematical Basis of the Analogies to Quantum Field Theory (open access)

On the Statistical Theory of Electromagnetic Waves in a Fluctuating Medium (II): Mathematical Basis of the Analogies to Quantum Field Theory

Report discussing the relationship between quantum field theory and the the statistical theory of waves. Basic equations exist in the latter theory which correspond closely to the fundamental equations of the former theory; i.e., to the commutation relations and the Heisenberg equation of motion. A probability density function of waves is introduced here which corresponds to the probability amplitude function in quantum mechanics. The theory of the statistical Green's functions and their relationships to the expectation values of the physical variables is also extensively developed. It is found that there exists a one-to-one correspondence between the formalism of Green's functions presented here and that used in field theory.
Date: December 7, 1964
Creator: Furutsu, K.
Object Type: Report
System: The UNT Digital Library