Report documenting standard x-ray diffraction powder patterns for various compounds, intended to replace previous data or provide information for new substances. It describes the methods and, for each substance, outlines any previous data as well as information about the sample used and structural data, with a table of diffraction patterns.

From Abstract: "This treatise is an attempt to provide a rational descriptive and analytical basis for tire mechanics. Chapters of this book are contributed by active research workers in the fields of rubber and textile properties, friction, material properties, tire stress problems, tire design and construction, vehicle skid and handling, and tire mechanical properties."

From Introduction: "The purpose of this report is to present an analysis of time variations in: (1) the phase (relative to a stable phase reference) if a 9414 Mc/s signal transmitted over this path, referred to hereafter as single-path phase data; (2) the phase observed at one receiving antenna relative to that observed at an adjacent antenna, referred to as phase difference data; (3) atmospheric refractivity as recorded by a microwave refractometer located at the Haleakala terminal; (4) the wind velocity at both ends of the path, and (5) surface atmospheric refractivity measured at 5 stations located on or near the path."

Report issued by the National Bureau of Standards over studies conducted on the effects of mortar on the strength of masonry. Materials, methods, and results are presented and discussed. This report includes tables, illustrations, and photographs.

From Introduction: "This paper consists essentially of a) a bibliography, b) an author index, and c) an index of the subject matter of the bibliography. While the primary objective is to focus on vacuum measurement, it was believed essential to include in the bibliography articles on vacuum technology in some measure accessory or essential to vacuum measurement. For maximum usefulness, an index of the subject matter of the references has been prepared. The abstract publications listed in the previous paragraph have been freely drawn upon in preparing the bibliography."

From Abstract: "The data obtained at the National Bureau of Standards on the sound insulating properties of building structures are summarized. A brief description of the sound-measuring techniques is given."

From Abstract: "This Monograph is a revision of the previous NBS Monograph 18. Its purpose is to provide an understanding of the heat treatment of iron and steels, principally to those unacquainted with this subject. The basic principles involved in the heat treatment of these materials are presented in simple form." From Introduction: "This Monograph has been prepared to answer such inquires and to give in simplified form a working knowledge of the basic theoretical and practical principles involved in the heat treatment of iron and steel."

From Introduction: "It is the purpose of this monograph to bring together and report the results of numerous exploding wire experiments performed at the National Bureau of Standards over the past five years."

From Introduction: "This Monograph has as its purpose the compilation and analysis of the extensive radio refractive index data available within the Central Radio Propagation Laboratory of the National Bureau of Standards. This will be accomplished by presenting both tabulations of basic data for specific locations and charts for interpolation to any location."

Report providing detail measurements and percentages in charts, using three statistical parameters, for amplitude-probability distributions of atmospheric radio noise.

From Abstract and Introduction: "This paper is, in essence, a report on the extension of the techniques first suggested in NBS Monograph 103 "Realistic Uncertainties and the Mass Measurement Process" to the area of length measurement. This paper covers the progress to date on the long gage blocks (from 5 to 20 in the length). The purpose of this purpose is to verify the closure between the "old" process and the "new" process, and to describe the present "points of departure" upon which some of the current assigned length values are based."

From Abstract: "This paper presents a comprehensive report on the measurement and the use of rotary-vane attenuator as an interlaboratory standard."

A handbook of mathematical functions that is designed to provide scientific investigations with a comprehensive and self-contained summary of the mathematical functions that arise in physical and engineering problems.

Report providing an alphabetical listing of the periodicals, both American and foreign, that are currently being received in the Washington (D.C.) Library of the National Bureau of Standards. Approximately 2,000 titles are cited, together with call numbers indicating the location of each in the NBS Washington Library. Although this information was compiled primarily for the use of the Bureau's scientific staff, it is also of value to libraries, scientific and technical organizations, and research workers.

Report issued by the National Bureau of Standards over thermal tests conducted on soil samples. The results of the laboratory tests are discussed. This report includes tables, illustrations, photographs.

Technical paper issued by the Bureau of Standards over studies conducted on the quality of sole leather. As stated in the introduction, "the development of a simple method for quickly determining the durability of sole leather seemed desirable, and this paper discusses a laboratory apparatus designed for this purpose and also presents the results of tests made to date to determine the relative wear of leather from different parts of the hide" (p. 3). This paper includes illustrations, and photographs.

Report issued by the Bureau of Standards over chemicals used for tanning leather hides. As stated in the introduction: "an investigation was conducted to determine the suitability of sulfite cellulose extracts, derived from the waste liquors discharged from paper pulp mills, for use in tanning hides for the manufacture of leather" (p. 309). This report includes tables, and photographs.

Technical paper issued by the Bureau of Standards over studies conducted on electrolysis. As stated in the introduction, "this investigation has included a study of the physical laws governing electrolytic and self-corrosion in soils, an extended investigation of the effects of electric currents on plain and reinforced concrete, and a study of the work of previous investigators relating to the subject of electrolysis and its prevention" (p. 5). This paper includes tables, illustrations, and photographs.

Report issued by the Bureau of Mines discussing the heating and cooling requirements for single-family homes. These requirements are determined from "Test Reference Year," or TRY data and long-term geographic climate information. This report includes tables, illustrations, photographs, and a map.

Report issued by the Bureau of Standards discussing world production of zinc and zinc alloys. History, metallurgy, and structural properties of zinc are presented. This report includes tables, illustrations, and photographs.

Report issued by the U.S. National Bureau of Standards discussing information on data entry equipment selection by Federal agencies and organizations. As stated in the abstract, "this report provides information about economic and general operational considerations, steps to be followed in acquisition and training, and other factors pertinent to data entry equipment selection" (p. iii). This report includes a table.

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.

Formulas, computer program, and illustrations for a great circle path at ionospheric heights.

Design and performance of a new near-zone electric field-strength meter.