From abstract: The Workshop on Computerization of Welding Information, sponsored by the National Bureau of Standards and the American Welding Institute, was held August 5-6, 1986 in Knoxville, Tennessee. Forty-two welding engineers, welding managers, and computer scientists gathered to discuss the necessity and design of databases for welding information. Each subject was introduced by specialists in that area.

Abstract: This manual provides DATAPLOT code solution to a variety of commonly occurring graphical problems. A line-by-line explanation of code is given, along with illustrations and general discussion.

Abstract: The National Bureau of Standards' Office of Standard Reference Data manages a network of data centers that prepare evaluated databases of physical and chemical properties of substances. Databases are available in printed form, on magnetic tapes, diskettes, and through on-line computer networks. This document provides a comprehensive list of the products available from the National Standard Reference Data System (NSRDS) for the years 1985-1986, including indexes qualified by author, material, and property terms. Ordering information and current prices can be found at the end of this document.

Abstract: The Workshop on Measurement of Electrical Quantities in Pulse Power Systems addressed measurements in pulse systems having the characteristics of pulse duration less than a millisecond, system voltages greater than 10 kilovolts, and system currents greater than 10 kiloamperes. The presented papers were divided into four categories: voltage measurements; current measurements; power and energy measurements, and data acquisition. Included are discussions of applications of conventional measurement techniques and state-of-the-art systems.

Abstract: In electromagnetic susceptibility testing of electronic equipment, the ideal incident field is a plane wave. To approximate this condition, a seven-element array of Yagi-Uda antennas has been constructed and tested at a frequency of 500 MHz. The element weightings are determined by a near-field synthesis technique which optimizes the uniformity of the field throughout a rectangular test volume in the near field of the array. The amplitude and phase of the electric field have been measured throughout the test volume with a short dipole probe, and the agreement with the theory is excellent.

Abstract: Custody transfer tables are presented for oxygen, argon, nitrogen, helium, and hydrogen. The tables are based on standard reference data previously compiled by the National Bureau of Standards. Two sets of tables are provided for each fluid. Tables in engineering units cover the range -40 to 130*F with pressures from 100 to 10,000 prig. Tables in SI units (density versus pressure and temperature) cover the range 200 to 370 K with pressures from 0.5 to 70 MPa. The tables in engineering units are designed to provide a means of determining the volume of gas at standard conditions contained in a tank given the volume of the tank and the pressure and temperature of the gas within the tank. The publication also includes four examples of use of the tables in calculating tank quantities.

From abstract: I propose the use of a template method for quantitative, correct, and transparent measurement of signal power to additive noise power ratios (SNR) of digital signals and systems under full operating conditions. Outer guard chips of digital templates hold intersymbol interference fixed on inner target chips in realizations of the respective template patterns in traffic. The proposed template method needs to be developed and proven as a potentially valuable metrology capability; it can be especially important for real time online performance assessment and monitoring of digital communication systems.

from Introduction: The measurement accuracy of the optical time-domain reflectometer (OTDR) is restricted in some applications by a limited operational dynamic range and by a lack of standardized test procedures. In an effort to better understand these restrictions, we have measured the range of linearity of some avalanche photodiodes used as backscatter detectors. Also, the effect of input launch conditions is examined and a possible standardized OTDR test procedure is proposed. Using these suggestions, we have made comparisons between attenuation values determined by cutback and backscatter methods and found that good agreement is possible. Finally, some methods are described for checking the response. linearity of OTDR systems.

Abstract: A method is presented for determining the impulse and step responses of a shielded cable using time domain terminal measurements and a physically based mathematical model for the transmission line properties of the cable. The method requires a computer controlled time domain measurement system and was implemented using the NBS Automatic Pulse Measurement System (APMS). Data are also developed for the frequency domain complex propagation function (attenuation and its related minimum-phase shift). The method is applied to 12 shielded paired-conductor (balanced) cables and 5 coaxial cables. Time domain responses are presented for three nominal cable lengths, 60 m (200 ft), 150 m (500 ft), and 300 m (1000 ft). The time domain responses are applied to the estimation of bit error rate increases due to the insertion of the cables into a digital signaling system employing a balanced polar NRZ waveform. Also discussed is the application of the time domain responses to time domain reflectometry techniques for cable acceptance tests and field-site testing of installed cables.

Abstract: This bibliography contains approximately 450 citations of papers concerning the characterization of optical fiber waveguides. Papers from scientific journals, trade journals and conferences are included along with book chapters. The citations of organized by parameter measured and measurement method. Where published abstracts are available they are included.

Abstract: A microcalorimeter has been built in WR 10 waveguide, 75-110 GHz, to serve as a power standard at the National Bureau of Standards (NBS). Included here is an evaluation of the errors in using the microcalorimeter for the measurement of effective efficiency of bolometer mounts. The error analysis shows a systematic uncertainty of +/- .83 percent and a random uncertainty of .37 percent.

Abstract: Densimeters for liquefied natural gas (LNG) from four manufacturers were tested in liquid methane and an LNG-like mixture of methane, propane, and nitrogen in the density reference system (DRS). The calibration and performance of one type tested for the first time are reported. The stability of the calibrations and performances of three densimeters of a type previously tested have been examined and are also reported here.

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.

Graphical presentation of he three-phase region at and near the triple point of parahydrogen.

Permanence and colorimetric properties of signal glass.

Diagrams and tolerances in inches for different size terminals.

Manual for operation and care of storage batteries for use in Army depots.

Report issued by the U.S. National Bureau of Standards discussing building codes and standards in earthquake-prone areas. As stated in the introduction, "the basic purpose of this project is to present, in one comprehensive document, current state-of-knowledge in the fields of engineering seismology and engineering practice as it pertains to seismic design and construction of buildings" (p. 1). This report includes tables, and illustrations.

Report issued by the U.S. National Bureau of Standards discussing studies conducted on building codes, standards, and regulations. The report includes transcripts from the 12th annual National Conference of States on Building Codes and Standards. This report includes tables, and illustrations.

Report issued by the U.S. National Bureau of Standards discussing piston gage pressure and reducing errors of measurement. Sources of error are described and evaluated in order to "reduce the magnitude of overall error of measurement" (p. 1). This report includes tables, and illustrations.