Report issued by the National Bureau of Standards over studies conducted on sub-surface temperatures and heat transfer. Testing methods are discussed. This report includes tables, and illustrations.

From abstract: The Workshop on Computerization of Welding Information, sponsored by the National Bureau of Standards and the American Welding Institute, was held August 5-6, 1986 in Knoxville, Tennessee. Forty-two welding engineers, welding managers, and computer scientists gathered to discuss the necessity and design of databases for welding information. Each subject was introduced by specialists in that area.

from Introduction: The measurement accuracy of the optical time-domain reflectometer (OTDR) is restricted in some applications by a limited operational dynamic range and by a lack of standardized test procedures. In an effort to better understand these restrictions, we have measured the range of linearity of some avalanche photodiodes used as backscatter detectors. Also, the effect of input launch conditions is examined and a possible standardized OTDR test procedure is proposed. Using these suggestions, we have made comparisons between attenuation values determined by cutback and backscatter methods and found that good agreement is possible. Finally, some methods are described for checking the response. linearity of OTDR systems.

Abstract: In electromagnetic susceptibility testing of electronic equipment, the ideal incident field is a plane wave. To approximate this condition, a seven-element array of Yagi-Uda antennas has been constructed and tested at a frequency of 500 MHz. The element weightings are determined by a near-field synthesis technique which optimizes the uniformity of the field throughout a rectangular test volume in the near field of the array. The amplitude and phase of the electric field have been measured throughout the test volume with a short dipole probe, and the agreement with the theory is excellent.

Abstract: Custody transfer tables are presented for oxygen, argon, nitrogen, helium, and hydrogen. The tables are based on standard reference data previously compiled by the National Bureau of Standards. Two sets of tables are provided for each fluid. Tables in engineering units cover the range -40 to 130*F with pressures from 100 to 10,000 prig. Tables in SI units (density versus pressure and temperature) cover the range 200 to 370 K with pressures from 0.5 to 70 MPa. The tables in engineering units are designed to provide a means of determining the volume of gas at standard conditions contained in a tank given the volume of the tank and the pressure and temperature of the gas within the tank. The publication also includes four examples of use of the tables in calculating tank quantities.

Abstract: A method is presented for determining the impulse and step responses of a shielded cable using time domain terminal measurements and a physically based mathematical model for the transmission line properties of the cable. The method requires a computer controlled time domain measurement system and was implemented using the NBS Automatic Pulse Measurement System (APMS). Data are also developed for the frequency domain complex propagation function (attenuation and its related minimum-phase shift). The method is applied to 12 shielded paired-conductor (balanced) cables and 5 coaxial cables. Time domain responses are presented for three nominal cable lengths, 60 m (200 ft), 150 m (500 ft), and 300 m (1000 ft). The time domain responses are applied to the estimation of bit error rate increases due to the insertion of the cables into a digital signaling system employing a balanced polar NRZ waveform. Also discussed is the application of the time domain responses to time domain reflectometry techniques for cable acceptance tests and field-site testing of installed cables.

Abstract: This bibliography contains approximately 450 citations of papers concerning the characterization of optical fiber waveguides. Papers from scientific journals, trade journals and conferences are included along with book chapters. The citations of organized by parameter measured and measurement method. Where published abstracts are available they are included.

Abstract: A microcalorimeter has been built in WR 10 waveguide, 75-110 GHz, to serve as a power standard at the National Bureau of Standards (NBS). Included here is an evaluation of the errors in using the microcalorimeter for the measurement of effective efficiency of bolometer mounts. The error analysis shows a systematic uncertainty of +/- .83 percent and a random uncertainty of .37 percent.

Abstract: Densimeters for liquefied natural gas (LNG) from four manufacturers were tested in liquid methane and an LNG-like mixture of methane, propane, and nitrogen in the density reference system (DRS). The calibration and performance of one type tested for the first time are reported. The stability of the calibrations and performances of three densimeters of a type previously tested have been examined and are also reported here.

Abstract: This manual provides DATAPLOT code solution to a variety of commonly occurring graphical problems. A line-by-line explanation of code is given, along with illustrations and general discussion.

From abstract: I propose the use of a template method for quantitative, correct, and transparent measurement of signal power to additive noise power ratios (SNR) of digital signals and systems under full operating conditions. Outer guard chips of digital templates hold intersymbol interference fixed on inner target chips in realizations of the respective template patterns in traffic. The proposed template method needs to be developed and proven as a potentially valuable metrology capability; it can be especially important for real time online performance assessment and monitoring of digital communication systems.

Abstract: The National Bureau of Standards' Office of Standard Reference Data manages a network of data centers that prepare evaluated databases of physical and chemical properties of substances. Databases are available in printed form, on magnetic tapes, diskettes, and through on-line computer networks. This document provides a comprehensive list of the products available from the National Standard Reference Data System (NSRDS) for the years 1985-1986, including indexes qualified by author, material, and property terms. Ordering information and current prices can be found at the end of this document.

Abstract: The Workshop on Measurement of Electrical Quantities in Pulse Power Systems addressed measurements in pulse systems having the characteristics of pulse duration less than a millisecond, system voltages greater than 10 kilovolts, and system currents greater than 10 kiloamperes. The presented papers were divided into four categories: voltage measurements; current measurements; power and energy measurements, and data acquisition. Included are discussions of applications of conventional measurement techniques and state-of-the-art systems.

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.

Report issued by the Bureau of Standards over a survey conducted on measurement methods of network parameters. As stated in the introduction, "this paper is concerned with the development of automatic methods of measuring basically the magnitudes and phase differences, or the complex ratio of two sinusoidal voltages, and applications of this capability to determining complex reflection coefficients and transmission coefficients and group delay times of electrical networks" (p. 1). This report includes tables, and illustrations.

Report documenting standard x-ray diffraction powder patterns for various compounds, intended to replace previous data or provide information for new substances. It describes the methods and, for each substance, outlines any previous data as well as information about the sample used and structural data, with a table of diffraction patterns.

From Abstract: "This monograph is distinguished by the use of plane-wave spectra for the representation of fields in space and by the consideration of antenna-antenna (antenna-scatterer) interactions at arbitrary separation distances." From Preface: "The primary objective of this monograph is to facilitate the critical acceptance and proper application of antenna and field measurement techniques deriving more or less directly from the plane-wave scattering matrix (PWSM) theory of antennas and antenna-antenna interactions. A second objective is to present some recent and some new theoretical results based on this theory."

From Introduction: "The first part of this monograph is concerned with the analysis of closed region wave-guide junction problems. This allows simplification of the techniques to be used since no branch cuts are involved in the spectral representation of the fields. However, the analysis can be extended to open region problems in a logical manner. This is the subject of the second part of this monograph."

From Introduction: "This paper describes some results of the first eight years of a fifteen year program in which a variety of coating and catholic protection systems are evaluated on their ability to protect steel piles in offshore conditions at Dam Neck, Virginia. It includes a description of the methods used in the evaluation and the results found on these systems."

From Abstract: "This document is a review of the principles, procedures, and instruments used in the measurement of visual range. The fundamental concepts of the visual range of the objects and lights are discussed. The principles of operation of the several classes of atmospheric attenuation meters are reviewed and representative instruments are described."