From abstract: The thermophysical and transport properties of selected fluids have been programmed in FORTRAN 77 which is available for micro computers. The input variables are any two of P, p, T (pressure, density, and temperature) in the single phase regions, and either P or T for the saturated liquid or vapor states. The output is pressure, density, temperature, internal energy, enthalpy, entropy, specific heat capacities (Cp and Cv), speed of sound and, in most cases, viscosity, thermal conductivity and dielectric constant.

From Abstract: "Comparisons with other other intensity measurements in individual spectra indicate that the National Bureau of Standards spectral-line intensities may have average errors of 20 percent, but first of all they provide uniform quantitative values for the seventy chemical elements commonly determined by spectrochemists. These data are presented by element in part I, and all 39000 observed lines are given in order of wavelength in part II."

From Preface: "This new edition of the NBS Tables of Spectral-Line Intensities incorporates three improvements on the original edition of 1961. In the original edition only about 25 000 of the 39 000 lines in the tables had been classified. In the ensuing thirteen years, about 8500 more lines (chiefly rare-earths) have been classified and the new classifications are here incorporated."

Abstract: This document contains the proceedings of the Third Cryocooler Conference, held at the National Bureau of Standards, Boulder, CO, on Sept. 17-18, 1984. About 140 people from 10 countries attended the conference and represented industry, government, and academia. A total of 26 papers were presented orally at the conference and all appear in written form in this document. The emphasis in this conference was on small cryocoolers in the temperature range of 4 - 80 K. Mechanical and non-mechanical types were discussed in the various papers. Applications of these small cryocoolers include the cooling of infrared detectors, cryopumps, small superconducting devices and magnets, and electronic devices.

Report issued by the National Bureau of Standards over studies conducted on glass cladding behavior under wind loads. Procedures for investigating cladding behavior are discussed. This report includes graphs, illustrations, and photographs.

From Abstract: "This monograph reviews available information on the production, properties, and uses of high-purity and commercial forms of nickel, and on the properties and applications of its important alloys, both ferrous and non ferrous."

From Introduction: "The work of the Magnetic Measurements Section of the National Bureau of Standards includes (1) testing of specifically prepared test specimens intended for use as standards for checking magnetic testing apparatus (2) investigation and development of magnetic testing apparatus (3) calibration of mutual inductors, test coils, and instruments for measuring magnetic fields, and (4) investigations in the field of magnetics such as studies of phenomena associated with nuclear magnetic resonance or the selection and testing of materials suitable to be used as standards of magnetic susceptibility."

Description of the standards used by the electrical power industry for the measurement of the electrical quantities.

Report that briefly describes many of the models of crystal and molecular structures which have appeared in the literature, and presents a bibliography of the publications, grouped according to model types, which describe the models in more detail.

From Introduction: "This is the second in a series of reports concerned with research and development requirements and areas of continuing concern in the computer and information sciences and technologies."

Report issued by the National Bureau of Standards over the 1985 Mexico earthquake. The rescue efforts and damage assessments are discussed. This report includes tables, maps, illustrations, and photographs.

Report documenting standard x-ray diffraction powder patterns for various compounds, intended to replace previous data or provide information for new substances. It describes the methods and, for each substance, outlines any previous data as well as information about the sample used and structural data, with a table of diffraction patterns.

Report issued by the National Bureau of Standards over the effectiveness of solar screens on office buildings. The effectiveness of solar shading is discussed. This report includes tables, maps, illustrations, and photographs.

Mollier chart of properties of ammonia.

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.

Conversion card issued by the United States National Bureau of Standards containing conversion information for length, area, mass (weight), volume, and temperature (exact). The front lists "Approximate Conversions to Metric Measures" and includes a continuum of temperatures at the bottom and a centimeter ruler along the right side (to 8 cm.). The back of the card lists "Approximate Conversions from Metric Measures" and includes an inch ruler along the right side (to 3 in.).

Report discussing the case of upper and lower state interaction introduced by a unified theory using a more compact tetradic notation. The general result is then applied to the Stark broadening of hydrogen. The thermal average of the time development operator for upper and lower state interaction is presented. A simple technique for evaluating the Fourier transform of the thermal average has been developed. The final calculations based on the unified theory and on the one-electron theory are compared with measurements in the high and low electron density regime.

Chart issued by the U.S. National Bureau of Standards illustrating the systematic relationships between phase diagrams of transition elements. This chart includes color illustrations.

Report describing a gravimetric hygrometer that serves as the NBS standard instrument for the measurement of the moisture content of gases on an absolute basis in terms of mixing ratio (mass water vapor/ unit mass of dry gas). The National Bureau of Standards and other laboratory reference and working instruments are compared and calibrated with this instrument. The measuring operation involves the absorption of the water vapor from a water vapor-gas mixture by a solid desiccant and the determination of the mass of this water vapor by precision weighing; it also involves the determination of the volume of the associated gas of known density by counting the fillings of two calibrated stainless steel cylinders. The construction and operation of the instrument is described. Discussions of the tests and calibrations of component parts, and of the sources of errors also are included. There is also an analysis of the random and systematic errors effecting the overall accuracy in the determination of mixing ratio.

Abstract: Shielding effectiveness relates to a material's ability to reduce the transmission of propagating fields in order to electromagnetically isolate one region from another. Because a complex material's shielding capability is difficult to predict, it often must be measured. A number of measurement approaches are studied including the use of a shielded room, coaxial transmission line holders, time domain signals, the dual TEM cell, and an apertured TEM cell in a reverberation chamber. In each case, we consider the system's frequency range, test sample requirements, test field type, dynamic range, time required, analytical background, and present data taken on a common set of materials.

Report issued by the National Bureau of Standards over studies conducted on load displacement of shallow soil anchors. Characteristics and testing methods are discussed. This report includes graphs, illustrations, and photographs.