From Abstract: "The electric field is plotted and its construction steps for axial symmetry are given."

From Introduction Purpose and Scope of Report: "This report is one of a series prepared for the Research Information Center and Advisory Service on Information Processing (RICASIP), and intended as a contribution to improved cooperation in the fields of information selection systems development, information retrieval research and mechanized translation."

Report presenting more than 500 references to the field of temperature measurement. These references were collected from two general sources: Scientific and technical literature and government reports. The period covered is from 1953 to June 1960, with some from earlier dates. References are divided into a number of categories based on the type of instrument used. Some references to calibration of instruments and to scientific theories upon which temperature measurement is based are also presented.

Report combining National Bureau of Standards Monograph 27 with the references given in Supplement 1 (May 13, 1963) and issued as a single publication to assist users of this material. References concern the field of temperature measurement. These references were collected from two general sources: Scientific and technical literature and government reports. References are divided into a number of categories based on the type of instrument used. Some references to calibration of instruments and to scientific theories upon which temperature measurement is based are also presented.

Report discussing variations in comparative tests of portland cements that could lead to the rejection of a material fully conforming to specification requirements, or the acceptance of a material with undesirable chemical or physical properties. Many of the causes for variation in chemical analyses and physical test results are listed in this discussion, and remedies for some of the more frequently encountered deficiencies in apparatus and methods are suggested.

Report discussing the selection, specifications, and use of signal-light colors. It discusses the nature of the problem, and the mathematical representation, recognition, production, control, and use of such colors. The characteristics of different types of chromaticity boundaries and the purpose and effect of the requirement for similarity of chromaticity characteristics are given special consideration. The treatment is varied according to the intended use. The discussion of the control of colors and the section on the use of colors are nontechnical, whereas the section on the production of signal colors is designed for the colorimetrist who is faced with the problem of selecting limit filters or drafting a specification.

Report presenting a table of corrected optical pyrometer readings which enables optical pyrometer users to convert observed temperature immediately to the true temperature, if the effective emissivity of the material being observed is known. The table gives observed temperatures from 1,000 to 3,000ºK in increments of 5 degrees, from 3,000 to 5,000ºK in increments of 10 degrees, from 5,000 to 10,000ºK in increments of 50 degrees, and from 10,000 to 39,900ºK in increments of 100 degrees. For these, true temperatures are tabulated for 49 emissivities ranging from 0.02 to 0.98 in increments of 0.02.

Abstract: The improved Density Reference System, the reference densimeter, and the method of determining sample density are described. The uncertainty of the density reference system is + 0.055%. The contribution from the estimated systema -ic error in density was + 0.022%. The estimated uncertainty caused by random error is three times the standard deviation of 0.011% and is based on sixty-three measurements of the densities of saturated liquid methane. The total density uncertainty is taken to be the sum of the systematic and random errors. This applies to the density range of 400 to 480 kg/m at pressures from 0.8 to 4 bar absolute and temperatures between 109 and 128 K. This accuracy statement is expected to apply over ranges of at least 400 to 1000 kg/m3 in density, 77 to 300 K in temperature, and 0.8 to 7 bar in pressure though the accuracy over these ranges has not been verified.

Abstract: This report presents the results of work at the National Bureau of Standards, Boulder, Colorado, to carefully evaluate, document, develop (when necessary), and describe the methodology for performing radiated susceptibility/vulnerability measurements using a reverberation chamber. The report describes the reverberation chamber theory of operation, construction, evaluation, functional operation, and use for performing immunity measurements. It includes an estimate of measurement uncertainties derived empirically from test results and from comparisons with anechoic chamber measurements. Finally, it discusses the limitations and advantages of the measurement technique to assist potential users in determining the applicability for this technique to their electromagnetic compatibility (EMC) measurement needs.

From Introduction: "The present report describes the condition of all of the porcelain enamels after exposure for 3 yr."

Abstract: This paper describes the theory of a single sensor to perform simultaneous electric and magnetic near-field measurements. The theory indicates that it is possible to obtain the magnetic-loop and electric-dipole currents using a loop terminated with identical loads at diametrically opposite points. The theory also indicates that it is possible to obtain an ideal load impedance for achieving equal electric and magnetic field responses of the loop. Preliminary experiments have been performed using plane waves to verify these results. Key words: electric field, electromagnetic interference, electromagnetic radiation, loop, magnetic field, near fields.

Abstract: This report presents a methodology for evaluating heat detection systems installed in buildings. Previous work for use primarily in designing new thermal fire detection systems was used as a starting point. The previous work was enhanced and supplemented to make it more useful for evaluating existing systems. The resulting equations were programmed into a user interactive computer program. This program is available in both BASIC and FORTRAN and will run on mainframes as well as personal computers. In addition, a modified version of the FORTRAN program was used to develop an extensive set of tables listing detector activation times for given building geometries, detector characteristics, and fire growth rates. These tables are useful for quick evaluation of alternative heat detector installations. Finally practical examples are included to illustrate the use of the tables and computer programs.

Abstract: This report presents a methodology for evaluating heat detection systems installed in buildings. Previous work for use primarily in designing new thermal fire detection systems was used as a starting point. The previous work was enhanced and supplemented to make it more useful for evaluating existing systems. The resulting equations were programmed into a user interactive computer program.' This program is available in both BASIC and FORTRAN and will run on mainframe as well as personal computers. In addition, a modified version of the FORTRAN program was used to develop an extensive set of tables listing: detector activation times for given building geometries, detector characteristics, and fire growth rates. These tables are useful for quick evaluation of alternative heat detector installations. Finally, practical examples are included to illustrate the use of the tables and computer programs.

Abstract: This directory presents information on 61 U.S. Government certification programs for products and services. Entries describe the scope and nature of each certification program, testing and inspection practices, standards used, methods of identification and enforcement, reciprocal recognition or acceptance of certification, and other relevant details. This directory is part of an ongoing NBS effort to establish and maintain a comprehensive database on standards, regulations, certification programs and related information. This material has bee. compiled to meet the needs of government, industry, and the public for information on U.S. Government certification programs in accordance with the requirements of the U.S. Trade Agreements Act of 1979.

Technical paper issued by the Bureau of Mines over studies conducted on fire resistance on building columns. As stated in the introduction, "the purpose of this investigation is to ascertain (1) the ultimate resistance against fire, of protected and unprotected columns as used in the interior of buildings; (2) their resistance against impact and sudden cooling from hose streams when in a highly heated condition" (p. 12). This paper includes tables, illustrations.

From Abstract: "The results of an investigation of lightweight, precast cellular concrete planks are given. Fire tests were made of two floor and five roof specimens made up of these planks. Variables, included density of the cellular concrete, thickness and span of the planks, reinforcement, and cover for the latter."

Report show the field of a short vertical antenna on a homogeneous ground is modified by the presence of a metallic screen. The screen is taken in the form of a circular disk and a concentric sector. The modification of the field is expressed in the form of surface integrals over the disk and the sector. Extensive numerical results for these basic integrals are given and a number of applications are illustrated.

Abstract: The input impedance of a probe antenna exciting a transverse electromagnetic (TEM) transmission line cell is formulated by a variational approach. The formulation also utilizes the results from a previous work on the field distribution inside a TEM cell excited by a vertical electrical Hertzian dipole. The final result of imoedance is shown to consist of two distinct terms, which are respectively contributed by the ordinary rectangular waveguide and the gap perturbation. Numerical results for both the real and imaginary parts of the impedance are given. The resistive part is found to be proportional to the square of the probe length, and the reactive part largely capacitive.

From Preface: "The purpose of this book is to replace, in part, a previous publication of the National Bureau of Standards (Circular 462) with the same title. The scope of the present work has therefore been broadened to include aspects of ionospheric radio propagation which were not treated in earlier publication."

Report issued by the National Bureau of Standards over low voltage electric thermostats. Thermostat test results are discussed. This report includes illustrations, and photographs.

Scientific paper issued by the Bureau of Standards over thermal expansion of fused silica. As stated in the abstract, "this paper gives the results of an investigation on the thermal expansion of transparent and nontransparent fused silica for various temperature ranges between -125 and +1,000 degrees Celsius. A detailed description of the apparatus and the methods used in this research and a summary of available data obtained by previous observers on the thermal expansion of fused silica are given" (p. 1). This paper includes tables, photographs, and illustrations.

Report discussing microwave attenuation measurement methods and standards. In addition, a relatively new and more precise way of representing and analyzing an attenuation measurement is presented. This in turn permits more rigorous definitions and error analyses than were previously possible. The referral of microwave attenuation measurements to standards operating at lower frequencies is discussed with particular attention to the errors in the referral processes as well as the errors in the standards themselves. Desirable characteristics are listed for attenuators which are suitable for calibration. Measurement methods are classified and described. Comments are made on the accuracy and convenience of various methods, and references are given which cover most of the basic and important research in this field. Key words: Microwave, attenuation, measurements, standards, tutorial.

Summary describing research projects and other activities undertaken by the U.S. National Bureau of Standards, lists of publications from the year, and a calendar of upcoming events.

Abstract: This report summarizes information obtained during the first year of a four-year feasibility study for a national earthquake engineering experimental facility. A five-year research program is presented for a national facility in which full-scale or large-scale structures or structural components would be subjected to static or dynamic lateral loads. The facility would have applicability to tests in the following areas: low-rise buildings, medium-rise buildings, high-rise buildings, industrial processing facilities, and power facilities. Representatives from a broad spectrum of professional, industrial, and trade organizations and Federal agencies participated in developing the research program. A comparison of existing testing facilities in the U.S. and other countries engaged in seismic testing and a discussion of international cooperation in large-scale testing are included.