Abstract: The 14th Joint Meeting of the U.S. - Japan Panel on Wind and Seismic Effects was held in Washington, D. C., United States front May 17 through 20, 1982. This publication, which is the proceedings of the Joint Meeting, includes the program, list of members, formal resolutions, technical papers, and the task committee report:. Subjects covered in the papers presented to the panel include: (l) characteristics of strong winds, (2) wind loads on structures and design criteria, (3) earthquake ground motions and dynamic analysis of embankment dams, (4) soil liquefaction study and methods to improve liquefaction resistance. (5) seismic loads on structures and design criteria, (6) stress analyses of pipelines during earthquakes, (7) full-scale seismic experiments, (8) earthquake hazard reduction program, (9) use of microcomputer for earthquake studies, (10) quantitative evaluation of damages caused by winds and earthquakes, and (11) tsunami research projects.

Abstract: This report summarizes NBS standards committee activities and accomplishments during calendar year 1983. It profiles NBS state participation on outside standards committees and highlights significant technical and individual contributions made by NBS staff. In 1983, 446 staff members (or 28% of NBS' professionals, scientific, and technical staff) participated in 989 standards committees of 87 national and international standards organizations.

This document contains the Proceedings of the Sixth NBS/NCSBCS Joint Conference on Research and Innovation in the Building Regulatory Process, held on September 11, 1984, in Denver, CO. This conference addressed streamlined administrative procedures, computers in construction, and fire safety technology. These Proceedings contain the 10 papers selected for presentation at the conference.

Abstract: This report summarizes information obtained during the first year of a four-year feasibility study for a national earthquake engineering experimental facility. A five-year research program is presented for a national facility in which full-scale or large-scale structures or structural components would be subjected to static or dynamic lateral loads. The facility would have applicability to tests in the following areas: low-rise buildings, medium-rise buildings, high-rise buildings, industrial processing facilities, and power facilities. Representatives from a broad spectrum of professional, industrial, and trade organizations and Federal agencies participated in developing the research program. A comparison of existing testing facilities in the U.S. and other countries engaged in seismic testing and a discussion of international cooperation in large-scale testing are included.

Abstract: This publication contains papers presented at the Seventeenth International Symposium on Free Radicals, held at Snow Mountain Ranch in Granby, Colorado, on August 18-23, 1985. The Symposium was attended by 147 people, representing industry, government, and academia, from 18 countries. A total of 67 papers appear in written form in this document.

Summary describing research projects and other activities undertaken by the U.S. National Bureau of Standards, lists of publications from the year, and a calendar of upcoming events.

Abstract: This directory presents information on 61 U.S. Government certification programs for products and services. Entries describe the scope and nature of each certification program, testing and inspection practices, standards used, methods of identification and enforcement, reciprocal recognition or acceptance of certification, and other relevant details. This directory is part of an ongoing NBS effort to establish and maintain a comprehensive database on standards, regulations, certification programs and related information. This material has bee. compiled to meet the needs of government, industry, and the public for information on U.S. Government certification programs in accordance with the requirements of the U.S. Trade Agreements Act of 1979.

Abstract: This report presents a methodology for evaluating heat detection systems installed in buildings. Previous work for use primarily in designing new thermal fire detection systems was used as a starting point. The previous work was enhanced and supplemented to make it more useful for evaluating existing systems. The resulting equations were programmed into a user interactive computer program. This program is available in both BASIC and FORTRAN and will run on mainframes as well as personal computers. In addition, a modified version of the FORTRAN program was used to develop an extensive set of tables listing detector activation times for given building geometries, detector characteristics, and fire growth rates. These tables are useful for quick evaluation of alternative heat detector installations. Finally practical examples are included to illustrate the use of the tables and computer programs.

Abstract: This report presents a methodology for evaluating heat detection systems installed in buildings. Previous work for use primarily in designing new thermal fire detection systems was used as a starting point. The previous work was enhanced and supplemented to make it more useful for evaluating existing systems. The resulting equations were programmed into a user interactive computer program.' This program is available in both BASIC and FORTRAN and will run on mainframe as well as personal computers. In addition, a modified version of the FORTRAN program was used to develop an extensive set of tables listing: detector activation times for given building geometries, detector characteristics, and fire growth rates. These tables are useful for quick evaluation of alternative heat detector installations. Finally, practical examples are included to illustrate the use of the tables and computer programs.

Abstract: This report presents the results of work at the National Bureau of Standards, Boulder, Colorado, to carefully evaluate, document, develop (when necessary), and describe the methodology for performing radiated susceptibility/vulnerability measurements using a reverberation chamber. The report describes the reverberation chamber theory of operation, construction, evaluation, functional operation, and use for performing immunity measurements. It includes an estimate of measurement uncertainties derived empirically from test results and from comparisons with anechoic chamber measurements. Finally, it discusses the limitations and advantages of the measurement technique to assist potential users in determining the applicability for this technique to their electromagnetic compatibility (EMC) measurement needs.

Abstract: The input impedance of a probe antenna exciting a transverse electromagnetic (TEM) transmission line cell is formulated by a variational approach. The formulation also utilizes the results from a previous work on the field distribution inside a TEM cell excited by a vertical electrical Hertzian dipole. The final result of imoedance is shown to consist of two distinct terms, which are respectively contributed by the ordinary rectangular waveguide and the gap perturbation. Numerical results for both the real and imaginary parts of the impedance are given. The resistive part is found to be proportional to the square of the probe length, and the reactive part largely capacitive.

Abstract: This paper describes the theory of a single sensor to perform simultaneous electric and magnetic near-field measurements. The theory indicates that it is possible to obtain the magnetic-loop and electric-dipole currents using a loop terminated with identical loads at diametrically opposite points. The theory also indicates that it is possible to obtain an ideal load impedance for achieving equal electric and magnetic field responses of the loop. Preliminary experiments have been performed using plane waves to verify these results. Key words: electric field, electromagnetic interference, electromagnetic radiation, loop, magnetic field, near fields.

Abstract: The improved Density Reference System, the reference densimeter, and the method of determining sample density are described. The uncertainty of the density reference system is + 0.055%. The contribution from the estimated systema -ic error in density was + 0.022%. The estimated uncertainty caused by random error is three times the standard deviation of 0.011% and is based on sixty-three measurements of the densities of saturated liquid methane. The total density uncertainty is taken to be the sum of the systematic and random errors. This applies to the density range of 400 to 480 kg/m at pressures from 0.8 to 4 bar absolute and temperatures between 109 and 128 K. This accuracy statement is expected to apply over ranges of at least 400 to 1000 kg/m3 in density, 77 to 300 K in temperature, and 0.8 to 7 bar in pressure though the accuracy over these ranges has not been verified.

from Introduction: The National Bureau of Standards has designed, constructed, and evaluated a standard for the support of very-high-frequency omnidirectional range (VOR) air navigation aids. The standard consists of two instruments: (1) a digital waveform signal generator for the composite VOR audio waveform, and (2) a standard phasemeter based on time series analysis of this waveform. Experimental results, a statistical analysis of them, and the principal software listings are included.

A report containing tables of thermodynamic properties of ammonia.

Report containing information regarding "the construction and maintenance of overhead and underground electrical supply and communication lines" (p. ii).

Report issued by the U.S. National Bureau of Standards discussing the use of metric units of measurement during construction. As stated in the scope, "this document outlines a selection of SI units, with multiples and sub-multiples, for general use in building design and construction" (p. 1). This report includes tables, and illustrations.

Report issued by the National Bureau of Standards over low voltage electric thermostats. Thermostat test results are discussed. This report includes illustrations, and photographs.

Technical paper issued by the Bureau of Mines over studies conducted on fire resistance on building columns. As stated in the introduction, "the purpose of this investigation is to ascertain (1) the ultimate resistance against fire, of protected and unprotected columns as used in the interior of buildings; (2) their resistance against impact and sudden cooling from hose streams when in a highly heated condition" (p. 12). This paper includes tables, illustrations.

Scientific paper issued by the Bureau of Standards over thermal expansion of fused silica. As stated in the abstract, "this paper gives the results of an investigation on the thermal expansion of transparent and nontransparent fused silica for various temperature ranges between -125 and +1,000 degrees Celsius. A detailed description of the apparatus and the methods used in this research and a summary of available data obtained by previous observers on the thermal expansion of fused silica are given" (p. 1). This paper includes tables, photographs, and illustrations.

Report combining National Bureau of Standards Monograph 27 with the references given in Supplement 1 (May 13, 1963) and issued as a single publication to assist users of this material. References concern the field of temperature measurement. These references were collected from two general sources: Scientific and technical literature and government reports. References are divided into a number of categories based on the type of instrument used. Some references to calibration of instruments and to scientific theories upon which temperature measurement is based are also presented.

Report presenting more than 500 references to the field of temperature measurement. These references were collected from two general sources: Scientific and technical literature and government reports. The period covered is from 1953 to June 1960, with some from earlier dates. References are divided into a number of categories based on the type of instrument used. Some references to calibration of instruments and to scientific theories upon which temperature measurement is based are also presented.

Report discussing variations in comparative tests of portland cements that could lead to the rejection of a material fully conforming to specification requirements, or the acceptance of a material with undesirable chemical or physical properties. Many of the causes for variation in chemical analyses and physical test results are listed in this discussion, and remedies for some of the more frequently encountered deficiencies in apparatus and methods are suggested.

Report presenting a table of corrected optical pyrometer readings which enables optical pyrometer users to convert observed temperature immediately to the true temperature, if the effective emissivity of the material being observed is known. The table gives observed temperatures from 1,000 to 3,000ºK in increments of 5 degrees, from 3,000 to 5,000ºK in increments of 10 degrees, from 5,000 to 10,000ºK in increments of 50 degrees, and from 10,000 to 39,900ºK in increments of 100 degrees. For these, true temperatures are tabulated for 49 emissivities ranging from 0.02 to 0.98 in increments of 0.02.