National Bureau of Standards (open access)

National Bureau of Standards

A report on research conducted by the National Engineering Laboratory, the National Measurement Laboratory, and the Institute for Computer Sciences and Technology under the direction of the National Bureau of Standards. It also presents the services and special programs offered by the Bureau to researchers and organizations.
Date: February 1983
Creator: United States. National Bureau of Standards.
Object Type: Report
System: The UNT Digital Library
Manual of Fire-Loss Prevention of the Federal Fire Council (open access)

Manual of Fire-Loss Prevention of the Federal Fire Council

From preface: "This issue of the Manual of Fire-Loss Prevention, the first edition of which was published in 1934, includes revisions and additions made in part to cover improvements in the past 10 years in methods of preventing and controlling fires. Such methods remain dependent largely on the elimination of preventable fires and abatement of loss from those that originate, by the use of appropriate designs and materials in building construction and the installation of applicable fire alarm and extinguishing equipment, to the extent justified by the hazard" (p. ii).
Date: 1945
Creator: Federal Fire Council (U.S.)
Object Type: Report
System: The UNT Digital Library
Annual Report and Directory of Accredited Laboratories: 1982 (open access)

Annual Report and Directory of Accredited Laboratories: 1982

Annual report describing the activities and goals of the National Voluntary Laboratory Accreditation Program (NVLAP) during 1982, and a directory list of laboratories including the test methods for which they are accredited.
Date: September 1983
Creator: NVLAP (Program : U.S.)
Object Type: Report
System: The UNT Digital Library
Low-Sloped Roofing Research Plan (open access)

Low-Sloped Roofing Research Plan

Abstract: This report presents a long-range plan for roofing research. The plan was developed in response to a need for roofing research addressing major materials problems and changes in low-sloped roofing materials technology. The intent of the plan is to establish the technical basis for developing standards and minimum levels of performance to assist in the selection of cost-effective and durable roofing materials. Four major areas of needed research are identified: (1) low-sloped roofing systems, (2) roofing membranes including single-ply and built-up, (3) thermal insulation for roofing systems, and (4) condition assessment and repair of roofs. Within each research area, a goal is given as well as a number of objectives to achieve the goal. A recommended approach to accomplish each objective is also given.
Date: July 1983
Creator: Cullen, William C.; Rossiter, Walter J., Jr.; Mathey, Robert G. & Clifton, James R.
Object Type: Report
System: The UNT Digital Library
Standards Committee Activities of the National Bureau of Standards: 1983 Highlights (open access)

Standards Committee Activities of the National Bureau of Standards: 1983 Highlights

Abstract: This report summarizes NBS standards committee activities and accomplishments during calendar year 1983. It profiles NBS state participation on outside standards committees and highlights significant technical and individual contributions made by NBS staff. In 1983, 446 staff members (or 28% of NBS' professionals, scientific, and technical staff) participated in 989 standards committees of 87 national and international standards organizations.
Date: April 1984
Creator: Newell, Karl G., Jr.
Object Type: Report
System: The UNT Digital Library
National Bureau of Standards (open access)

National Bureau of Standards

This is an article on the center for materials science, the National Bureau Standards (NBS). From ceramic tiles that shield the space shuttle to dental adhesives which replace metal fillings, new materials are revolutionizing technology and everyday life. NBS is at the forefront of materials technology with its broad-based research effort conducted by the Center for Materials Science (CMS). The Center provides measurements, data, standards, reference materials, and other technical information regarding materials to industry, government agencies, universities, and other scientific organizations. CMS research supports development of new and improved materials which can be used safely, efficiently, and economically.
Date: 1986
Creator: United States. National Bureau of Standards.
Object Type: Report
System: The UNT Digital Library
Facilities of the National Bureau of Standards (open access)

Facilities of the National Bureau of Standards

From forward: Every laboratory in this country is a valuable national resource. Along with the people who work in these facilities, U.S. laboratories constitute the basic foundation of this country's scientific and industrial strength. As the nation's foremost science and engineering measurement laboratory, the National Bureau of Standards has some of the premier research and testing facilities in the United States, and several of our laboratories are unequaled anywhere in the world. Bureau scientists and engineers use these special facilities to pursue the measurement-related work that U.S. science and industry need to grow and prosper. This brochure highlights only a small number of the special facilities available at NBS and provides information about their availability for collaborative or independent research and testing.
Date: December 19, 1984
Creator: United States. National Bureau of Standards.
Object Type: Report
System: The UNT Digital Library
Directory of Accredited Laboratories: 1984 (open access)

Directory of Accredited Laboratories: 1984

Abstract: Laboratories accredited by the National Voluntary Laboratory Accreditation Program (NVLAP) are identified along with the specific test methods for which they are accredited. The current status of existing accreditation programs is given for laboratories that test thermal insulation, freshly mixed concrete, carpet, wood burning stoves, paint, and personnel radiation dosimeters, and that provide acoustical testing services. Indexes are provided for searching the Directory for laboratories accredited in specific testing areas or for specific test methods.
Date: February 1985
Creator: NVLAP (Program : U.S.)
Object Type: Report
System: The UNT Digital Library
Computerizing Materials Data -- A Workshop for the Nuclear Power Industry (open access)

Computerizing Materials Data -- A Workshop for the Nuclear Power Industry

Abstract: This report summarizes the recommendations of a Workshop in Computerized Materials Data as related to engineers in the Nuclear Power Industry. Four areas of discussion are featured: the content of a proposed data system; its size and data sources; the user interfaces and system capabilities; and ways of making further progress. In addition, changes in the use of materials data in the Nuclear Power Industry and progress-to-date in computerizing these data are presented.
Date: January 1985
Creator: Rumble, John, Jr. & Westbrook, Jack H.
Object Type: Report
System: The UNT Digital Library
Research and Innovation in the Building Regulatory Process (open access)

Research and Innovation in the Building Regulatory Process

This document contains the Proceedings of the Sixth NBS/NCSBCS Joint Conference on Research and Innovation in the Building Regulatory Process, held on September 11, 1984, in Denver, CO. This conference addressed streamlined administrative procedures, computers in construction, and fire safety technology. These Proceedings contain the 10 papers selected for presentation at the conference.
Date: April 1985
Creator: Beavers, Linda
Object Type: Report
System: The UNT Digital Library
Report of the Seventieth National Conference on Weights and Measures, 1985 (open access)

Report of the Seventieth National Conference on Weights and Measures, 1985

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.
Date: November 1985
Creator: United States. National Bureau of Standards.
Object Type: Report
System: The UNT Digital Library
Progress in Environmental Specimen Banking (open access)

Progress in Environmental Specimen Banking

In October, 1986, the 10th U.S.-German Seminar of State and Planning on Environmental Specimen Banking was held at the Virginia Institute of Marine Sciences in Gloucester Point, Virginia. At this meeting the current status of specimen banking activities in the U. S., FRG, Canada, and Japan was presented and discussed. This publication contains the proceedings of that meeting with contributions describing various activities related to banking and analysis of samples from aquatic, atmospheric, terrestrial, and human monitoring programs.
Date: 1988
Creator: Wise, Stephen A.; Zeisler, Rolf & Goldstein, George M.
Object Type: Report
System: The UNT Digital Library
Report of the Sixty-Sixth National Conference on Weights and Measures, 1981 (open access)

Report of the Sixty-Sixth National Conference on Weights and Measures, 1981

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.
Date: January 1982
Creator: United States. National Bureau of Standards.
Object Type: Report
System: The UNT Digital Library
Standards Committee Activities of the National Bureau of Standards: 1982 Highlights (open access)

Standards Committee Activities of the National Bureau of Standards: 1982 Highlights

Abstract: This report summarizes NBS standards committee activities and accomplishments during, calendar year 1982. It describes the management of standards activities at NBS, profiles NBS staf* participation on outside standards committees, and highlights significant technical and individual contributions made by NBS staff. In 1982, 457 staff members (or 29% of NBS' professional, scientific, and technical staff) participated in 1,046 outside standards committees of 97 national and international standards organizations.
Date: March 1983
Creator: Newell, Karl G., Jr.
Object Type: Report
System: The UNT Digital Library
Annual Report and Directory of Accredited Laboratories: 1981 (open access)

Annual Report and Directory of Accredited Laboratories: 1981

Annual report describing the activities and goals of the National Voluntary Laboratory Accreditation Program (NVLAP) during 1981, and a directory list of laboratories including the test methods for which they are accredited.
Date: September 1982
Creator: NVLAP (Program : U.S.)
Object Type: Report
System: The UNT Digital Library
Fitness-for-Service Criteria for Assessing the Significance of Fatigue Cracks in Offshore Structure (open access)

Fitness-for-Service Criteria for Assessing the Significance of Fatigue Cracks in Offshore Structure

Abstract: Results of a research program to develop fitness-for-service criteria for assessing the significance of fatigue cracks in offshore structures are presented in five papers. Each paper describes the goals and approaches to a specific task and details the results of the study.
Date: August 1985
Creator: Cheng, Yi-Wen
Object Type: Report
System: The UNT Digital Library
VOR Calibration Services (open access)

VOR Calibration Services

from Introduction: The National Bureau of Standards has designed, constructed, and evaluated a standard for the support of very-high-frequency omnidirectional range (VOR) air navigation aids. The standard consists of two instruments: (1) a digital waveform signal generator for the composite VOR audio waveform, and (2) a standard phasemeter based on time series analysis of this waveform. Experimental results, a statistical analysis of them, and the principal software listings are included.
Date: April 1985
Creator: Larsen, Neil T.; Vecchia, Dominic F. & Sugar, George R.
Object Type: Report
System: The UNT Digital Library

Map of Standard Time Zones of the United States and Adjacent Parts of Canada and Mexico as of January 1, 1948

Map of the United States and surrounding areas with time zones marked and labeled in red. Bodies of water are marked, with depth marked by hatchures, as well as state lines and major cities..
Date: January 1, 1948
Creator: Geological Survey (U.S.)
Object Type: Map
System: The UNT Digital Library
Report of the Twenty-Second National Conference on Weights and Measures, 1929 (open access)

Report of the Twenty-Second National Conference on Weights and Measures, 1929

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.
Date: June 1929
Creator: United States. National Bureau of Standards.
Object Type: Report
System: The UNT Digital Library
Report of the Twenty-Third National Conference on Weights and Measures, 1930 (open access)

Report of the Twenty-Third National Conference on Weights and Measures, 1930

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.
Date: June 1931
Creator: United States. National Bureau of Standards.
Object Type: Report
System: The UNT Digital Library
Report of the Twenty-First National Conference on Weights and Measures, 1928 (open access)

Report of the Twenty-First National Conference on Weights and Measures, 1928

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.
Date: May 1928
Creator: United States. National Bureau of Standards.
Object Type: Report
System: The UNT Digital Library
Report of the Twenty-Fourth National Conference on Weights and Measures, 1931 (open access)

Report of the Twenty-Fourth National Conference on Weights and Measures, 1931

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.
Date: June 1931
Creator: United States. National Bureau of Standards.
Object Type: Report
System: The UNT Digital Library
Report of the Twenty-Fifth National Conference on Weights and Measures, 1935 (open access)

Report of the Twenty-Fifth National Conference on Weights and Measures, 1935

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.
Date: June 1936
Creator: United States. Bureau of Standards.
Object Type: Report
System: The UNT Digital Library
Report of the Twenty-Sixth National Conference on Weights and Measures, 1936 (open access)

Report of the Twenty-Sixth National Conference on Weights and Measures, 1936

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.
Date: June 1937
Creator: United States. National Bureau of Standards.
Object Type: Report
System: The UNT Digital Library