The first part of this paper describes the Meissner effect in superconductors which serves as the most definitive evidence for superconductivity. It is shown that the microwave perturbation technique may be used to demonstrate this effect. By measuring the changes of resonant frequency and inverse quality factor Q of a microwave cavity with a small volume of sample loading, the Meissner effect can be shown by using the Slater perturbation equation. The experimental system is described with details and the basic principle of each component discussed. The second part of this work describes the technique employed to do the actual measurements. The experiments were conducted on samples of Gallium Arsenide (GaAs) and lead zirconate titanate (PZT) to look for the possible high temperature superconductivity properties. Results of these experiments are presented and discussed. Conclusion and suggestions to future exploration are made.

Abstract not available

Throughout history consumer products were generally manufactured from wood and metal. They either had to hold their natural color or become subject to painting. When plastics entered the industry, it was recognized for its ease of shaping, re-usability, physical properties and its low cost. One of plastics' greatest benefits is its ability to hold a given color from within allowing it to avoid use of paint. This paper will give a brief overview on the effects of pigments when incorporated in a polyolefin. It will provide a classification of the main types of pigments and how each effect the properties of the product through: crystallization, weatherability, opacity, coloristic values and of course viscosity.

It has become increasingly important to remain on the cutting edge of technology for a company to remain competitive and survive in today's high-tech industries. To do this, a company needs various resources dedicated to this cause. One of these resources is the use of existing materials, as starting points, for which improved materials can be based. For this, a company must rely on the characterization of existing materials to bring that base technology into their company. Through this evaluation, the base materials properties can be obtained and a material with improved properties can be developed. There are many techniques that can be used in characterizing an existing material, but not every technique is required to obtain the desired goal. The techniques utilized depend upon the depth of identification required. This report summarizes several techniques utilized in the characterization of existing materials and provides some examples of evaluated products.

The rheology of 1-8% hydroxypropyl cellulose (HPC) solutions has been studied in the temperature range of 20-45 degrees Celsius. The results showed that the relative viscosity at each HPC concentration decreases with increasing temperature. The relative viscosity decreases drastically at about 43 degrees Celsius due to a phase transition. The influence of anionic surfactant, sodium dodecylsulfate (SDS), induced gelation of a 2% HPC solution. The HPC solutions gelled at surfactant SDS concentrations ranging from 0.4 to 1.0 critical micelle concentration (CMC). The gelation of the HPC/SDS hydrogel is explained in the surfactant SDD - bridged HPC linear polymer chains. The complex viscosity - concentration profile was determined below the CMC of the SDS - water pair. The peak itself was a function of frequency indicating the presence of two relaxation times within the gelled network.

The first chapter of this descriptive paper outlines a problem, proposes a solution and poses three questions for me to answer after completion of research. The problem was to bring an emerging ceramic style into all of my pieces rather than just the few I have mastered. The solution was to create three sets of new forms and make them repeatedly until they boasted the sought-after style. Chapter 2 chronicles the research of creating, morphing, detailing and finally mastering these new forms. Chapter 3 summarizes the experience and answers the three aforementioned questions: (1) What is my personal definition of a successful pot? (2) How does the undulating style affect the functionality of the pot? (3) How does the Campbell tartan glazing complement or detract from the pot's form?

My creative intent is to connect with viewers at an emotional level. My chosen metaphor is “Peeling the Onion.” The implication of the metaphor is that understanding is achieved after one looks below the surface and views the underlying “layers.” The challenge is to find images that are personally interesting and also connect with the viewer. At times the creative process proceeds in linear manner and at other times it seems to take on a life of its own. During my search for a balance between the literal and ambiguous, I explored the circle, the spiral and the sphere. Printmaking offers unique opportunities to produce evocative imagery. Drawing is the basic tool I employ to define form and my use of printmaking processes allows for evolving the image over time. The immediacy and spontaneity of my drawings is combined with a methodical approach to image development. Exploring the spiral, sphere, circles and the metaphor “Peeling the Onion” has provided me a means of giving a form to my concepts and hopefully a connection with the viewer.

The transmission of voice data over Internet Protocol (IP) networks is rapidly gaining acceptance in the field of networking. The major voice transmissions in the IP networks are involved in Internet telephony, which is also known as IP telephony or Voice Over IP (VoIP). VoIP is undergoing many enhancements to provide the end users with same quality as in the public switched telephone networks (PSTN). These enhancements are mostly required in quality of service (QoS) for the transmission of voice data over the IP networks. As with recent developments in the networking field, various protocols came into market to provide the QoS in IP networks - of them, multi protocol label switching (MPLS) is the most reliable and upcoming protocol for working on QoS. The problem of the thesis is to develop an IP-based virtual network, with end hosts and routers, implement MPLS on the network, and analyze its QoS for voice data transmission.

It has been noticed in the past five years that the Internet use has been troubled by the lack of sufficient security and a legal framework to enable electronic commerce to flourish. Despite these shortcomings, governments, businesses and individuals are using the Internet more often as an inexpensive and ubiquitous means to disseminate and obtain information, goods and services. The Internet is insecure -- potentially millions of people have access, and "hackers" can intercept anything traveling over the wire. There is no way to make it a secure environment; it is, after all, a public network, hence the availability and affordability. In order for it to serve our purposes as a vehicle for legally binding transactions, efforts must be directed at securing the message itself, as opposed to the transport mechanism. Digital signatures have been evolved in the recent years as the best tool for ensuring the authenticity and integrity of critical information in the so called "paperless office". A model using XML digital signatures is developed and the level of security provided by this model in the real world scenario is outlined.

Server load balancing technology has obtained much attention as much business proceeded towards e-commerce. The idea behind is to have set of clustered servers that share the load as against a single server to achieve better performance and throughput. In this problem in lieu of thesis, I propose and evaluate an implementation of a prototype scalable server. The prototype consists of a load-balanced cluster of hosts that collectively accept and service TCP connections. The host IP addresses are advertised using the Round Robin DNS technique, allowing any host to receive requests from any client. Once a client attempts to establish a TCP connection with one of the hosts, a decision is made as to whether or not the connection should be redirected to a different host namely, the host with the lowest number of established connections. This problem in lieu of thesis outlines the history of load balancing, various options available today and finally approach for implementing the prototype and the corresponding findings.

This problem in lieu thesis is considering a TCP client H1 making a connection to distant server S and is downloading a file. In the midst of the downloading, if H1 crashes, the TCP connection from H1 to S is lost. In the future, if H1 restarts, the TCP connection from H1 to S will be reestablished and the file will be downloaded again. This cannot happen until host H1 restarts. Now consider a situation where there is a standby host H2 for the host H1. H1 and H2 monitor the health of each other by heartbeat messages (like SCTP). If H2 detects the failure of H1, then H2 takes over. This implies that all resources assigned to H1 are now reassigned or taken over by H2. The host H1 and H2 transmit data between each other when any one of it crashed. Throughout the data transmission process, heart beat chunk is exchanged between the hosts when one of the host crashes. In particular, the IP addresses that were originally assigned to H1 are assigned to H2. In this scenario, movement of the TCP connection between H1 and S to a connection between H2 and S without disrupting the TCP …

Power consumption is an important issue for mobile computers since they rely on the short life of batteries. Conservation techniques are commonly used in hardware design of such systems but network interface is a significant consumer of power, which needs considerable research to be devoted towards designing a low-power design network protocol stack. Due to the dynamic nature of wireless networks, adaptations are necessary to achieve energy efficiency and a reasonable quality of service. This paper presents the application of energy-efficient techniques to each layer in the network protocol stack and a feedback is provided depending on the performance of this new design. And also a comparison of two existing MAC protocols is done showing a better suitability of E2MAC for higher power conservation. Multimedia applications can achieve an optimal performance if they are aware of the characteristics of the wireless link. Relying on the underlying operating system software and communication protocols to hide the anomalies of wireless channel needs efficient energy consumption methodology and fair quality of service like E2MAC. This report also focuses on some of the various concerns of energy efficiency in wireless communication and also looks into the definition of seven layers as defined by International …

Regional population growth and increasing trade with Mexico are creating severe traffic congestion along Interstate 35 and at the Laredo bridge crossings. The construction of a new Interstate Highway 69 has been offered as one solution to this problem. This analysis examines the economic impacts of building Interstate 69 and its potential impact on job creation in the counties along its projected path. Using the IMPLAN input-output modeling system, construction of Interstate 69 will support $4.2 billion in economic activity in the counties through which it will pass. More importantly, based on an analysis of Interstate 27 in west Texas, it can be projected that Interstate 69 will spur a 2% gain in regional employment above any usual economic growth.

Jewelry has been used as a gift exchange between lovers for many centuries. It has been conveyed in a variety of forms to symbolize the meaning of love. This body of work is associated with glory of love, of sexual experience between lovers representing the idea of unity when two parts become one unit, not only in the physical sense, but also in the psychical sense. The works were divided into three series including three pair of rings, two pair of lockets, and five pair of necklaces. The erotic expression has been addressed on every piece in an abstract way counting design motifs, material used, and interaction within the piece itself. Moreover, each piece has romantic meanings and essential aspects as a symbol of love.

I proposed in my paper to use juxtaposition of unexpected scale in my sculpture, with the expectation that it would create an unexpected tension that is visually stimulating to the viewer. I achieved this by creating disharmony in scale between an object that is perceived as miniature and an object that is perceived as gigantic within each sculpture. I then asked three questions of these sculptures: Was I able to alter the viewer's preconceived notions of the miniature and the gigantic through the manipulation of the size relationship between two objects within each sculpture? Which of these preconceived notions of the miniature or the gigantic became dominant as the main focal point in each sculpture? Did this intentional use of disharmony in scale stimulate enough of my interest to continue investigating this idea? I wrote about three sculptures that had been made for this project. The first was Manifest Destiny, a seven and a half foot tall bronze piece depicting an oil drill with a platform in the shape of the state of Texas. On the platform a gigantic bronze figure rides a miniature bronze donkey across the platform. The second bronze sculpture I wrote about was Gulliver in Suburbia; …

Chapter I describes the purpose of the project, which was to develop a body of work that exhibits all that I am at this point in time. The questions I presented to myself were the following: 1. A successful piece is defined by what parameters? 2. What visual qualities indicate my passion for clay and my enthusiasm for life? Chapter II lists and explains the five parameters of a successful piece, which are composition, firing, mark making, color contrast, and movement. Furthermore there is an explanation on how these parameters visually display my passion for clay and my enthusiasm for life. Chapter III is a summary concluding that by discovering my five parameters of a successful piece I now understand the elements that I am searching for in my work. My work will grow from this understanding as long as I have the same passion for clay and enthusiasm for life.

In software testing, it is often desirable to find test inputs that exercise specific program features. Finding these inputs manually, is extremely time consuming, especially, when the software being tested is complex. Therefore, there have been numerous attempts automate this process. Random test data generation consists of generating test inputs at random, in the hope that they will exercise the desired software features. Often the desired inputs must satisfy complex constraints, and this makes a random approach seem unlikely to succeed. In contrast, combinatorial optimization techniques, such as those using genetic algorithms, are meant to solve difficult problems involving simultaneous satisfaction of many constraints.

Organic forms representing nature, but not particular species, are combined with elements signifying attitudes toward the natural world with an emphasis on North American culture. The viewer is encouraged to consider human effects on the environment. Aquarium Night Light and Trophy both refer to the human tendency for commercial exploitation coupled with the creation of nature images we sometimes seem to prefer over the reality of the natural world. Reliquary metaphorically connects traditional religious connotations associated with saints' relics to both a biblical injunction to use anything we needed from the natural world and our contemporary belief that exposure to nature can have beneficial effects on human mental, spiritual, and physical health.

After generating work for many years in an intuitive, “truth to materials” mindset my intent was to explore the interior possibilities of my sculptural forms and relate these if possible, to the exterior. Alongside this exploration of the interior I introduced surface texture and color onto both interior/exterior surfaces. In some cases the work had undergone a change, which lent new meaning and provided new relationships to exist between the interior/exterior of my sculpture. Not all of the work was satisfactory to me, though I feel there were many positive results from work that may not have been successful. I found that the integration of the interior/exterior dialogue into my existing work provided new meaning allowing new relationships within the work that had not existed previously.

Through my art I seek to communicate the continuing cycle of change that unites all life forms. I had to find methods of presentation and surface that would enhance my sculptural statements that I had begun to address. Utilizing salt, wood and low temperature sagger firing, resulted in softer, more natural appearing surfaces. These surfaces complimented and completed the organic forms with which I was working. The problems encountered in presentation were rectified by alternately contrasting the surfaces of the presentation with the surfaces of the pieces, while utilizing forms that echoed the natural forms of the pieces. The opposite approach also worked well, using natural presentation materials to create a sense of unity, and geometric bases for contrast. These methods resulted in an increased sense of energy, unity and completion in the work presented.

This paper is an experiment using digital video to locate and identify the abstract in everyday life and nature. The abstract moment occurs when the image that is captured by video loses its connection with the original context, allowing the images to be viewed in an entirely new way. The abstract moment is initiated by a transformative instant, that instant in which perception is altered and the viewer sees the intended content of composition of light and sound. The project contains four digital videos that record the artist's progress and interests.

The focus of this thesis is the conveyance of moods through clothes, the communication of feelings through fashion. The thesis illustrates how clothes speak, and the tools used to communicate a visual message. Three moods are used as examples: Serenity, Valor and Love. The thesis presents the author's design ability, creative personality, cultural background and technical skills. Sources of data range from personal experience to books on Cultural Studies, armor and mask making, Indian/ Asian dance and theatre, fabric design, fabric manipulation and websites on related topics. The chapters discuss background information of the author and the topic of research, and present each ensemble created to support the thesis. Through design details and photographs of the nine ensembles, the thesis demonstrates different techniques of achieving visual communication through clothes.

This paper is presented in satisfaction of the requirement for two problems in lieu of thesis which are required for the degree, Master of Science. The two problems are: (1) to provide an electric interface between the M6800 microprocessor and the printer; and (2) to design an Arabic character set and to provide the logic required for its implementation. As it would be artificial and impractical to document these problems separately, a single document here is provided.

This program will be used in operant behavior research to monitor and record responses and trigger and record reinforcements on a variable reinforcement (VI) schedule. The original application of this program will be the servicing of several rat cages simultaneously. The response will be the pressing of a metal bar in the cage, the reinforcement will be the triggering of a feeding mechanism which disperses a food pellet into the cage. The subsequent applications of this program are not limited, in that the actual response and reinforcement devices and the subject type are all treated indifferently by the program.