"Although all constructors in Germany use duralumin quite frequently, and prefer cold riveting exclusively for permanent (nondetachable) connections of individual structural components, their methods and equipment are very diversified. The differences are due to a great extent to the diversity of structural types and to the special shapes of the individual subassemblies. The results is that different manufacturers have developed totally different riveting methods, as well as entirely different working methods" (p. 1).

The contest for engines of great endurance had entries of 13 types by the following firms: Breguet, Farman, Fiat, Hispano-Suiza, Lorraine-Dietrich, Panhard-Levassor, Peugeot, Renault, and Salmson.

"The recent development of technical science demands maximum reliability of functioning, together with maximum utilization of construction materials. For this purpose we must know what stresses are produced during functioning. One cause of great stresses are mechanical vibrations and this report describes a method of using an oscilloscope to measure the stresses of rapidly changing phenomena" (p. 1).

It has been less well understood that the induced drag (or, better said, the undesired increase in the induced drag as compared with the theoretical minimum calculated by Prandtl) plays a decisive role in the process of taking off and therefore in the requisite engine power. This paper seeks to clarify the induced drag.

This report presents a theoretical treatment of the vaporization process of medium and heavy oils. The results of this investigation, which were mostly obtained from the lighter components of the heavy fuels, require a 10- or 16-fold vaporization in comparison with gasoline. We must attain a still finer degree of atomization, in order to include the heavier components.

This report presents a method for solving the problem of liquid cooling at high temperatures, which is an intermediate method between water and air cooling, by experiments on a test-stand and on an airplane. A utilizable cooling medium was found in ethylene glycol, which has only one disadvantage, namely, that of combustibility. The danger, however is very slight. It has one decided advantage, that it simultaneously serves as protection against freezing.

Memorandum presenting an overview of the development of aeronautical industries and commercial aircraft as well as some of the problems that are resulting from it. Details of the aeronautical budget in various countries, organization of the air service, material exports, and airline operations are provided.

In experimenting with airfoil models in a wind tunnel, the magnitude of the forces acting on the model is affected by the fact that the air stream in which the model is suspended, has a restricted cross-section. In order to utilize the results for an airplane in an unlimited quantity of air, a correction must be made. The magnitude of this correction was determined by Prandtl by the application of his wing theory.

This report examines the cause and effect of the energy conversion in airless-injection engines. In order to obtain a criterion for the chosen working method, it takes into consideration the time relations between the individual processes. Observations of the engine alone do not suffice to obtain the necessary basis for a critical analysis of the processes.

For aircraft engines the three principal operating conditions are idling speed, cruising speed, and diving with the engine stopped. In what follows, we will discuss a method which affords a good idea of the course of pressure for the above mentioned operating conditions. The pressures produced in the driving gear are of three kinds; namely, the pressure due to gases, the pressure due to the inertia of the rotating masses, and the pressure due to the inertia of the reciprocating masses.

English airplane construction is presented with a particular emphasis on metal construction techniques. Steel rib and fuselage construction are discussed as well as the use of duralumin in construction.

A nomogram is developed which renders it possible by drawing a few lines, to determine: the location of the center of gravity for zero wing and tail moments; the longitudinal dihedral angle; the tail coefficient F(sub h) iota/F(sub t). Moreover there is no difficulty in determining the magnitude of the restoring moment or of the unstable moment.

"In an attempt to treat theoretically the effect of ailerons, difficulty arises because an aileron may begin at any point of the wing. Hence the question arises as to how the transition of the lift distribution proceeds at such a point, since the effect of the aileron (i.e., the moment generated about the longitudinal axis) depends largely on this distribution. In order to answer this question regarding the lift distribution during irregular variations in the angle of attack at first independently of other influences, especially those of the wing tips, we have taken as the basis of the following theoretical discussion a wing of infinite span and constant chord which exhibits at one point an irregular variation in the angle of attack" (p. 1).

Factors of safety serve three purposes: provides against trouble arising from unexpectedly large loads, allows for imperfections of workmanship, represents a depreciation allowance. A consideration of these safety factors is provided in this report.

Goldbeater's skin, which is the prepared outside membrane of the large intestine of an ox, is examined as a balloon fabric and details of how goldbeater's skin is prepared for use are provided. The construction techniques employed by Germany, France, and England are all discussed.

Report discussing the progress of airplane performance and measured by speed.

In this report we will consider, as the dominating characteristic, either the load carried, the speed, the radius of action, the fuel consumption, the activity of transport, or, lastly, the qualities of comfort and safety. The first four factors determine the theoretical efficiency, while the others determine its practical efficiency.

Report presenting an examination of the concept that aircraft are essentially fragile and deteriorate rapidly when in service, which the author considers to be a misunderstanding due to the intense conditions occurring during war. Some examples of commercial airplane lines that have been running for several years and some potential deterioration costs that must be considered are provided.

The author discusses cost of operating commercial airplanes and endeavors to clear up prevalent misunderstandings. Curves of operating cost for varying duration, speed, reserve horsepower, etc. are developed.

Memorandum presenting a description and formulas that can be used to plot the cross-sectional outline of a Joukowski wing.

In order to determine the maximum and the most favorable pitch for a propeller, it was found desirable to investigate the dependence of propeller efficiency on the angle of attack of the propeller blade. The results of a few experiments are given to show that propeller blades conduct themselves just like airplane wings with reference to the dependence of their efficiency on their angle of attack.

This report provides a description of the wind tunnel housing and motors at the Belgian Service Technique de L'Aeronautique.

A basic theoretical and experimental investigation is made of the shimmy behavior of a swiveling landing gear, the experimental tests being conducted with a small wheel mounted over a continuous belt. Effects of wheel loading, rolling velocity, rearward position of the wheel with respect to the swivel axis, tire elasticity, and torsional flexibility of the fuselage are investigated both experimentally and theoretically. A major theoretical conclusion is that the motion of a landing gear moving in a straight line without fuselage elasticity is stable for a sufficiently large rearward position of the wheel behind the swivel axis, and this conclusion is well verified quantitatively by the experimental data.

"A check of the calculation methods used by Foppl and Henky for investigating the reliability of shell plating under hydrostatic pressure has proved that the formulas yield practical results within the elastic range of the material. Foppl's approximate calculation leaves one on the safe side. It further was found on the basis of the marked ductility of the shell plating under tensile stress that the strength is from 50 to 100 percent higher in the elastic range than expected by either method" (p. 1).