Technical report outlining measurements of the equilibrium in the exchange of deuterium between ammonia and hydrogen and of the kinetics of this reaction. Details a series of tests carried out to measure Murphree plate efficiencies.

Abstract: During the summer of 1955, two test holes were drilled into the Triassic Chinle Formation in the Lukachukai Mountains near Cove, Arizona, to obtain geologic information. Brief airborne and ground reconnaissance was made of Triassic outcrops near Cove. No anomalous radioactivity was found in the test holes, but chemical tests showed concentrations of heavy metals in conglomerate lenses in the Chinle Formation. Channel sandstones in the middle part of the Petrified Forest Member appear to be the most favorable for mineralization. The Shinarump Member, here underlain by a permeable unit, and occurring at depths greater than 500 feet, appears less promising for uranium exploration.

Purpose: "The purpose of the following experiments was to obtain data on the selective extraction of uranium over vanadiur from samples of vanadium ores by leaching with sodium carbonate or sodium bicarbonate solutions, with the object of establishing the time, temperature, and concentration conditions necessary for satisfactory extractions."

From introduction: "The purpose of this report is to present some design and construction data for automatic titrators."

The following report describes a study that was made to adapt a redox method that oxidizes uranium(IV) to uranium(VI) by ferric ion into a microcoulometric method.

The following report describes methods developed for determination of uranium in the alloy.

Thirty gram patches of plutonium dioxide can be readily chlorinated by reaction with phosgene or carbon tetrachloride at temperatures of 350 and 450 C respectively. Plutonium trichloride prepared by either method can be reduced to the metal in a hermetically sealed bomb by reaction with calcium. On a twenty gram scale yields of approximately 97 per cent are obtained when a calcium-iodine booster is employed. It has been demonstrated that a method for reduction of plutonium trichloride to the metal without the use of a booster can be development.

Technical report. Photomicrographs showing the effect of heating polished uranium surface at 600, 700, 850, and 1000 degrees C, and sandblasted and cut surface at 1000 degrees C are included.

The purpose of the test was to determine if the 1A Canal Water System Demineralizers can be satisfactorily charged with resin. The 1A Canal Water System Demineralizer was satisfactorily charged with resin and conductivity of the demineralizer effluent was less than 0.1 microbes as specified in the Test Procedure.

The purpose of the test was to obtain data on the decontamination factors for Cesium-136, Cesium-137, Strontium-92, one hour gross iodine and Iodine-131. This data will be used to determinate efficiency of lithium hydroxide resin for removing radioactive cations and anions. The denomination factors for a particular demineralizer using lithium hydroxide resign were found to vary for different radioisotopes. This variation was from 2.3 for Cesium136 to 77,000 for gross iodine.