Additional runs have been made in the six-inch, continuous-flow mixing chamber to study the rate of mass transfer between isobutanol and water. These runs were inconclusive because the effluents were mutually saturated. A new four-inch cell has been designed and is being fabricated; this will permit a reduction in the time available for mass transfer. Consideration has been given to other liquid pairs which may transfer more slowly than isobutanol-water. The system nitrobenzene-ethylene glycol appears attractive.

Methods of producing extremely clean surfaces on rolled Zircaloy-2 strip have been investigated. It has been found that the finer abrasives, 400 mesh or finer, are more effective than coarse types because of their ability to penetrate pits and crevices more readily. Two such cleanings, with an intermediate 35 v/o HNO3-5 v/o HF pickle, resulted in a microscopically clean surface. Ultrasonic inspection of the EBWR fuel plates has been completed during this quarter. Approximately 95% of the plates were found acceptable. All subassemblies manufactured from the EBWR plates met dimensional specifications and passed 9-day corrosion tests at 290°C (550°F). All thoria-urania pellets for the loading of Borax-IV have been pressed, loaded into tube plates, and fabricated into subassemblies. The total number of subassemblies made was 82, of which 72 were fuel plates and 10 were blanket plates, more than sufficient for the loading. The reactor has gone critical using this loading.

From Summary: "This report covers installation of Argonaut Reactor at the Du-Page site of the Argonne National Laboratory."