Report containing information regarding magnetic jacks, which are devices used "for positioning the control rods in a nuclear reactor, especially in a reactor containing water under pressure" (page 9). Contains a description of the device, its use, test results, and illustrations.

From introduction: The objective of this program is the development of a nuclear physical model and its calculation code for pressurized-water cooled and moderated reactors to predict accurately reactivity, rod positions and power distributions at operating temperatures, and reactor life from a nuclear standpoint.

In this paper we are concerned with the potentials and electrical currents flowing at an interface between two phases as a result of chemical reactions which promote selective ion migration. Although our immediate concern is an explanation of the available results on smelting, a sufficiently broad understand requires that we go far beyond this limited results and bring together the findings from many related fields. We first must consider the diffusion of particles across an interface, which for convenience we will speak of as a membrane since convection currents usually stir both phases except for a thin boundary layer.

This study is concerned with a class of circuits which employs two tubes in a series connection--sometimes referred to as the stacked-tubes connection. This study will be concerned with two configurations that have shown considerable promise in the field of high speed circuitry. In Part I a configuration called the dynamic plate load amplifier is dealt with. In Part II a configuration called the White cathode follower is examined.

From introduction: This report is a summary of geologic information obtained by the USGS at Dolomite Hill, Nevada.

This report summarizes the hazards associated with the operation of the Lynchburg Test Reactor (LTR) critical experiments. The LTR critical experiment program is outlined and the design of the experiment is described. The experiments will provide basic data to check two-dimensional calculational methods and provide information needed in the design of the LTR.

Technical report. From Abstract: "Rate data are presented for the oxidation of neptunium (V) by vanadium (V) in nitric acid." From Summary: "Rates of oxidation of neptunium (V) were determined by a solvent extraction technique based on the difference in distribution coefficients for neptunium (V) and neptunium (VI)."

Technical report. From Abstract: "An ion exchange process was demonstrated for the recovery of Pu238 from irradiated neptunium oxide. Three cycles of anion exchange proved adequate for the removal of fission products and for the separation of the neptunium and plutonium from each other."

An analysis to screen the various particle-collection systems which might be used for sampling the upper atmosphere with a rocket sampling vehicle has been undertaken. Although the current model of the Goetz Aerosol Spectrometer is not suitable, a high-flow-rate sampler of this general type, if it can be designed, appears promising. The design of such a sampler will be undertaken in future work. If a workable design is possible, this method would appear to be the most promising of all.

Development of more reliable, lower cost components for high temperature liquid metal-cooled reactor plants.

The relation between the maximum permissible transverse energies of particles that can be focused, the azimuthal energy, and the beam width is discussed relative to Megatron coil design. It is shown that deep potential wells for focusing can be obtained only at the expense of a narrow beam. (C.J.G.)

From abstract: "A relationship is derived that predicts the power radiated from the cathode to the anode of the plasma diode. The radiated power loss predicted by this relationship for a tungsten cathode and a nickel anode at widely different temperatures is found to be five times greater than the prediction of the conventional relationship which assumes gray-body conditions."

A report discussing "an explosive ferroelectric power supply and the experimental approach followed in determining its operating characteristics."

Technical report. From Abstract: "Ultrasonic energy appropriately applied to the die or container of a laboratory-type direct extrusion press effected a marked increase in the free extrusion rate of lead and aluminum billets at a constant extrusion rate. the same results were obtained in extrusion cladding steel tubes with aluminum. Rate increases were generally 100 per cent or greater, and decreases in force were usually within the range of 10 to 20 per cent. Furthermore, the shape and slope of the extrusion curves were altered. The effect appeared to be attributable to a reduction of both die friction and container wall friction under ultrasonic influence."

The first series tests in the KER-REP-1 loop proved that a fisssion product contaminated loop could be decontaminated to a safe level for contact maintenance. The second series of tests ere scheduled for a more thorough evaluation of these processes includes specific decontamination factors, process corrosion rates, loop activity reduction factors (loop decontamination factors), and any preferential decontamination which may be present.

Report documenting ongoing research and development carried out by the Instrumentation and Controls Division of the Oak Ridge National Laboratory.

When following the performance of automatic and semi-automatic equipment that is left unattended for extended periods of time, it is often desirable to be able to check this equipment by remote means. A convenient vehicle for such a check is the telephone since nearly all locations have or can have a telephone extension installed. The check of the equipment may be made as simple or extensive as desired, with the outcome of the check represented by a relay condition, for example. The condition of the relay is then transmitted to the interrogator over the telephone line by means of the presence or absence of a tone.

Report documenting the investigation of cosmic and terrestrial background radiation. "Remeasurements in many locations furnished estimates of dosimetric increase in terrestrial levels due to fallout. Radiation measurement sin residential dwellings in he New York metropolitan areas are described" (p. 1).

This report analyzes the High-Energy Electrostatic Plasma Gun, which is to be used for propulsion.

From Introduction: "In the following pages are summarized the factors which influence neutron economy and which, therefore, are important in nuclear safety."

From introduction: The Commission's underlying objective of this program is to conduct sufficient engineering and development work to determine the most feasible and economical methods of producing nuclear super-heated steam from a boiling water reactor.

The purpose of the survey was to determine the radiation levels in the 1 D Boiler Chamber during plant operation. The conclusion of this survey is that the radiation level in the 1 D Boiler Compartment with the 1A, 1B, and 1C Main Coolant loops in service at approximately 100 per cent power ranged from .03 MR/HR to 6.0 MR/HR.

Report containing information regarding the design of the Tory II-A nuclear ramjet engine, and descriptions of its locale, test program, and possible hazards.

Instrumentation shall be provided as shown on the attached drawing, SK-1-26835 for Confinement System Control. The Primary objective of the confinement system shall be to provide maximum possible confinement of contamination, consistent with building limitations, in the event of any contamination, consistent with building limitations, in the event of any credible reactor accident resulting from equipment failure or reactor mis operation.