COMP is an interactive nonlinear least squares routine written in BASIC language and used to obtain estimates of parameters in nonlinear functions and to approximate their associated statistical errors. The program uses the linearizing (or Taylor Series) expansion of partial derivatives outlined in Draper and Smith, (1966, pp. 267 to 270). Therefore, partial derivatives must be supplied (as well as the function) by the user for any new models not currently contained in the programs. When a linearizing method is used to estimate parameters in a nonlinear model, all the usual procedures of linear regression theory can be applied. However, the results so obtained are only valid insofar as the linearized form approximates the true model. All of the statistics computed by COMP should be viewed with this restriction in mind. The output of COMP includes the variance-covariance matrix, t-tests for parameters, Von Neumann's ratio, observed, predicted and residual values, the error mean square, and an optional procedure to evaluate heteroscedasticity.

The Digital SLIFER Recorder (DSR) is an instrument that records a time-varying frequency signal in the range from 700 kHz to 1500 kHz with an amplitude greater than 200 mV. This signal is referenced to an input fiducial marker, and recording is initiated by an increase in the frequency of the signal. The primary purpose of this instrument is to record data from the SLIFER system. The DSR records 512 samples after the record trigger signal, with a sample interval of 50 ..mu..s (for a total recording time of 25.55 ms). The measurement essentially uses a 20-cycle period-averaging counter technique.

A description and user instructions are presented for ACORN, a FORTRAN computer program for drawing fault trees. ACORN analyzes the input logical structure of a fault tree and provides data for CalComp plot of the tree. AND, OR, and INHIBIT gates are permitted, and basic events are drawn as diamonds, circles, or houses. Each component (gate or basic event) can have a descriptive label within a rectangle attached to the top of its respective symbol. Tree logic is input as a set of FORTRAN statements, each defining a gate in terms of logical operations of the components input to it. ACORN develops the logical structure of the tree from the input statements. The tree's physical structure is developed by assigning relative spatial coordinates to the logical relationships between a gate and its inputs. ACORN provides input data checking, a printer plot of the fault tree, and plotting data for a CalComp model 763 plotter. The program is operational on a CONTROL DATA CYBER 74 computer. 2 figures, 1 table.

The results are described of an experimental and theoretical program designed to measure the relative intensities of line radiation from various ionization stages of carbon and helium impurities added to a deuterium plasma, and to relate the observed line intensity ratios to the plasma temperature. A deuterium sample plasma is produced and heated to a temperature of 2 to 7 eV at an electron density of 5 x 10/sup 16/ cm/sup -3/. The plasma parameters are monitored at various discrete times during the plasma decay using the Thomson scattering system. Simultaneously, the same sample volume is observed in the visible region of the spectrum using a streak camera coupled to a spectrograph. A continuous record of the plasma visible spectrum is thus obtained during the plasma time history, with at one specific time a data point on the plasma parameters, n/sub e/ and T/sub e/. Modifications were made to the plasma sample facility to shorten the duration of the preionization current and to increase its magnitude. This modification accomplished the desired effect of increasing the electron density in the heated plasma to 5 x 10/sup 16/, essentially obtaining full filling density. Additional insulation was added to the solenoid and satisfactory …

This technical report contains a listing of a general program for multi-configuration Hartree--Fock (MCHF) calculations, including its documentation. Several examples are given showing how the program may be used. Typical output for several cases is also presented. This program has been tested over an extended period of time for a large variety of cases. This program is written for the IBM 360 or 370 in double-precision arithmetic.

During Fiscal Year 1977, efforts of the Natural Fission Reactor Program have been directed toward (1) further measurements and predictions of reactor product migration at Oklo, (2) uraninite solubility studies, (3) radiogenic equilibria studies of natural Pu, Ra, and Th in U ores, (4) search for evidence of other natural fission reactors, and (5) supportive analytical measurements and procedures development.

The t less than 0 multiperipheral formalism of Ciafaloni, DeTar, Misheloff, Mueller, Muzinich and Yesian is reviewed, extended, and applied to the ordered S-matrix whose ring amplitudes comprise the zeroth level of the topological expansion. Toller M-function notation is used throughout. The bootstrap and cylinder problems are formulated in terms of a well defined helicity pole propagator; a definition of the complete twisted Reggeon loop, which appears in the one-twist term of the cylinder, is given as a helicity pole expansion. Some consideration is given to the following subjects: diagonalization, naturality, threshold behavior, Regge cuts, and complex helicity.

Various ceramic materials in the form of small, monolithic bars were screened as candidate materials in heat exchanger structures for automotive gas turbine engines. The material finally selected consists of 60 w/o* petalite (LAS) and 40 w/o of a recrystallizable glass which converts during thermal processing to cordierite (MAS). This new material, GE-3200, was fabricated by Coors Porcelain Company into a circular honeycomb structure 53.3 cm diameter and 10.2 cm thick (21'' x 4'') and having 69.8 holes/cm/sup 2/ (450 holes/in./sup 2/) of rectangular geometry. Dimensions of each cell are about 2.5 mm x 0.5 mm (0.1'' x 0.02'') with wall thicknesses about 0.20 mm (0.008''). Small bar-shaped specimens of the honeycomb were used to measure thermal, chemical, and mechanical properties and for macro- and microstructure examination. Cylindrical honeycomb specimens about 15.2 cm diameter and 10.2 in. thick (6'' x 4'') were sent to Ford Motor Company and are currently being tested in a gas turbine engine. Data obtained from testing the bar-shaped honeycomb specimens of GE-3200 and from testing bar-shaped honeycomb specimens of Corning 9455 were compared. Results indicate that GE-3200 has significantly better resistance to sulfuric acid and to sodium chloride than Corning 9455; thermal expansion of GE-3200 …

Progress is reported in the evaluation of the performance of a water jet drill in a stressed rock, particularly in drilling at hole diameters in excess of one inch. Drilling tests are being carried out in a barrier pillar in a layer of coarse, lead-bearing sandstone. Problems encountered in the test drilling are discussed. (JGB)

The conception, design, and testing of the receiver subsystem proposed by the McDonnell Douglas/Rocketdyne Receiver team for the DOE 10-MW Pilot Plant and the 100-MW Commercial Plant are described. The receiver subsystem consists of the receiver unit, the tower on which the receiver unit is mounted above the collector field, and the supporting control and instrumentation equipment. The plans for implementation of the Pilot Plant are given including the anticipated schedule and production plan (procurement, installation, checkout, and maintenance). Specifications for the performance, design, and test requirements for the Pilot Plant receiver subsystem are included. (WHK)

The activities and the results of research in the study of high energy nuclear reactions carried out at Carnegie Institute of Technology from 1957 to 1967 and at Carnegie-Mellon University from 1967 to 1977 are summarized. A complete list of all publications, doctoral dissertations, and reports resulting from the research of this project is also included. A major part of the report is a review of the research activities and results. The objective of the research of this project was the study of reactions initiated by projectiles of energy above about 100 MeV. The main effort was the investigation of simple nuclear reactions with the objective to deduce reaction mechanisms. These reactions were also used as probes to determine the nuclear structure of the target. In addition, a number of studies of spallation reactions were undertaken which included the determination of excitation functions and recoil properties. Recent research activities which have involved the study of pion induced reactions as well as reactions initiated by heavy ions is also discussed.

The study was made to investigate the neutronic feasibility of a mixed-flow gas-core reactor. Three reactor concepts were studied: four- and seven-cell radial reactors and a seven-cell scallop reactor. The reactors were fueled with UF/sub 6/ (either U-233 or U-235) and various parameters were varied. A four-cell reactor is not practical nor is the U-235 fueled seven-cell radial reactor; however, the 7-cell U-233 radial and scallop reactors can satisfy all design criteria. The mixed flow gas core reactor is a very attractive reactor concept and warrants further investigation.

Conservation measures that seal a building, like storm window installation, can significantly reduce its energy requirements. These measures also protect its occupants from air pollutants having outdoor sources but amplify any harmful effects of those generated indoors. Using these Fourier series techniques and an approximation of outdoor pollution peaks by step functions, we obtained the following results: the average daily concentration indoors is the same as outdoors for any pollutant with no indoor sinks if inside and outside air are assumed uniform (that is, well mixed). However, lowering a building's air exchange rate 4-fold will still protect its occupants from outdoor pollution sources, but only if the outdoor peak or variation above its average is much greater than its average, and the peak is short-lived.

A method is presented of estimating the effective shear strength of the fractured rock that surrounds a nuclear detonation. To do this, we measure the cavity radii from previous detonations. We also use numerical computer codes to model the explosion phenomenology and develop the functional relationship between the normalized cavity displacement and the normalized shear strength of the rock. In this sense, the computer codes serve as replica models that are dimensionally analyzed to interpret the field experience. We separate the effects of gravity and overburden pressure from the effects of the material properties and give scaling laws for each. We have analyzed approximately 300 nuclear detonations at the Nevada Test Site (NTS) and have found that the most frequent shear strengths are between 0.020 and 0.060 kbars. They are also essentially independent of the depth-of-burial ranges considered. We obtained good agreement between predicted shear strengths and those measured from core samples for different areas at the Nevada Test Site.

A number of numerical experiments were performed to assess the validity of diffusion theory for calculating the reactivity state of various small core LMFBR disrupted geometries. The disrupted configurations correspond, in general, to various configurations predicted by SAS3A for transient undercooling (TUC) and transient overpower (TOP) accidents for homogeneous cores and to the ZPPR-7 configurations for heterogeneous core. In all TUC cases diffusion theory was shown to be inadequate for the calculation of reactivity changes during core disassembly.

This report presents an annotated bibliography of risk assessments that are pertinent to constructing, operating, and decommissioning a federal repository for the underground storage of radioactive waste. This might be considered as a first phase in an assessment of the risks associated with radioactive waste storage. Only those documents judged to be the more pertinent are abstracted. The abstracts are grouped under 13 classifications. A subject and author index is provided.

The multiperipheral ordered bootstrap of Rosenzweig and Veneziano is studied by using dual triple Regge couplings exhibiting the required threshold behavior. In the interval -0.5 less than or equal to t less than or equal to 0.8 GeV/sup 2/ self-consistent reggeon couplings and propagators are obtained for values of Regge slopes and intercepts consistent with the physical values for the leading natural-parity Regge trajectories. Cylinder effects on planar pole positions and couplings are calculated. By use of an unsymmetrical planar ..pi..--rho reggeon loop model, self-consistent solutions are obtained for the unnatural-parity mesons in the interval -0.5 less than or equal to t less than or equal to 0.6 GeV/sup 2/. The effects of other Regge poles being neglected, the model gives a value of the ..pi..--eta splitting consistent with experiment. 24 figures, 1 table, 25 references.

Although the standard gauge model of weak and electromagnetic interactions based on the work of Salam and Weinberg has met with great success, there are experimental facts that will require its extension or its modification to a new gauge model; the discovery of a heavy lepton at SLAC and the absence of parity violation in atoms that is expected from the neutral weak current coupling to electrons are discussed. Three tests are proposed that bear on these questions. First, heavy lepton production in e/sup +/e/sup -/ annihilation when one of the incident beams is longitudinally polarized is considered and the purely leptonic decay of this heavy lepton is examined. An asymmetry in the inclusive angular distribution of one charged lepton (electron or muon) is important in determining the structure of weak interactions of the heavy lepton. In fact, this angular asymmetry easily distinguishes between the cases V - A and V + A for the heavy lepton current. Then, the decay channel L ..-->.. ..nu../sub L/ + one hadron is considered (L = heavy lepton) under the same experimental set-up and the inclusive one-hadron angular distribution examined. Parity nonconservation in the decay of the heavy lepton causes a conspicuous forward-backward …

This report summarizes our current effort and ideas toward the development of a model for the planetary boundary layer using the finite element technique. As an initial step, the finite element methodology is applied to simpler version of the boundary layer equations given by the two-dimensional, constant-property, incompressible conservation equations (Navier-Stokes equations). Solution procedures for both the steady-state and transient equations are discussed. For the transient problem, a variable time-step, trapezoid-rule algorithm with dynamic time-truncation error control is presented. The resulting system of nonlinear algebraic equations is solved by a Newton iteration procedure with a frontal solution scheme used for the linear set of equations. The need to develop a suitable linear equation solver, with respect to minimization of computer storage and execution costs, particularly for large (three-dimensional) finite element problems, is also discussed.

Information is presented concerning the examination of fast reactor fuels, FBR analytical quality assurance standards, and analytical methods development irradiation tests.

The Remote Working Level Monitor (RWLM) is an instrument used to remotely monitor the RN-daughter concentrations and the Working Level (WL). It is an ac powered, microprocessor based instrument which multiplexes two independent detector units to a single central processor unit (CPU). The CPU controls the actuation of the detector units and processes and outputs the data received from these remote detector units. The remote detector units are fully automated and require no manual operation once they are set up. They detect and separate the alpha emitters of RaA and RaC' as well as detecting the beta emitters of RaB and RaC. The resultant pulses from these detected radioisotopes are transmitted to the CPU for processing. The programmed microprocessor performs the mathematical manipulations necessary to output accurate Rn-daughter concentrations and the WL. A special subroutine within the program enables the RWLM to run and output a calibration procedure on command. The data resulting from this request can then be processed in a separate program on most computers capable of BASIC programming. The calibration program results in the derivation of coefficients and beta efficiencies which provides calibrated coefficients and beta efficiencies.

Available information pertinent to the treatment of geothermal brines was collected by literature search and then evaluated and summarized for use by the electric utility and geothermal industries. The information was screened from the geothermal, oil and gas, wastewater disposal, and boiler water treatment industries. The current state of knowledge and methodology concerning the treatment of geothermal brines to control scaling and corrosion in geothermal electric power production was assessed. Currently, geothermal scale in pipes and wells is removed by physical or chemical methods. There is a growing effort on developing methods to control scale formation for both fresh and spent brines, including pH adjustment and application of an electrical potential for fresh fluids, and coagulation to treat spent fluids. Current methods of corrosion control center around planned replacement of piping and other plant components, with efforts focused primarily on development of materials with improved corrosion resistance. Recommendations for additional work to improve brine treatment include the following: (1) chemical and physical characterization of brine and scale compositions, (2) basic data on the mechanism of scale formation and the effects of inhibitors, (3) development of instrumentation to monitor geothermal brine constituents, (4) correlation of laboratory results with field test data, …

The results and accomplishments of the Superconducting Magnet Development Program (SCMDP) for the second quarter of the calendar year 1977 are summarized. The presentations are arranged according to projects rather than the group organization by discipline of the Magnetics and Superconductivity Section. The design, procurement, and fabrication of the Large Coil Segment are well under way. Significant progress is reported on the conductor stability and loss experiments for both toroidal field coils and poloidal field coils.

This report reviews experience and research related to the pyrophoricity of zirconium and zirconium alloys. The results of recent investigations of the behavior of Zircaloy and some observations of industrial handling and treatment of Zircaloy tubing and scrap are also discussed. A model for the management of waste Zircaloy cladding hulls from light water reactor fuel reprocessing is offered, based on an evaluation of the reviewed information. It is concluded that waste Zircaloy cladding hulls do not constitute a pyrophoric hazard if, following the model flow sheet, finely divided metal is oxidized during the management procedure. Steps alternative to the model are described which yield zirconium in deactivated form and also accomplish varying degrees of transuranic decontamination. Information collected into appendixes is (1) a collation of zirconium pyrophoricity data from the literature, (2) calculated radioactivity contents in Zircaloy cladding hulls from spent LWR fuels, and (3) results of a laboratory study on volatilization of zirconium from Zircaloy using HCl or Cl/sub 2/.