The results of this study are tabulated in Summary Tables A and B below. For the most part, these values were read from smoothed curves drawn thru the plotted experimental data. The values for aluminum (i.e., 0 w/o Li) were taken from the 1948 Edition of the ASM Metals Handbook. The room temperature properties are reported for lithium contents of 0, 3.5, 7 and 10 weight per cent. In the case of the high temperature properties, there were insufficient data to allow extrapolation and interpolation to pre-chosen compositions: these properties are therefore reported only for the compositions of the actual samples.

The Remote Working Level Monitor (RWLM) is an instrument used to remotely monitor the RN-daughter concentrations and the Working Level (WL). It is an ac powered, microprocessor based instrument which multiplexes two independent detector units to a single central processor unit (CPU). The CPU controls the actuation of the detector units and processes and outputs the data received from these remote detector units. The remote detector units are fully automated and require no manual operation once they are set up. They detect and separate the alpha emitters of RaA and RaC' as well as detecting the beta emitters of RaB and RaC. The resultant pulses from these detected radioisotopes are transmitted to the CPU for processing. The programmed microprocessor performs the mathematical manipulations necessary to output accurate Rn-daughter concentrations and the WL. A special subroutine within the program enables the RWLM to run and output a calibration procedure on command. The data resulting from this request can then be processed in a separate program on most computers capable of BASIC programming. The calibration program results in the derivation of coefficients and beta efficiencies which provides calibrated coefficients and beta efficiencies.