From abstract: "This report describes work done on ARF Project C 216 from January 5, 1962 to September 15, 1962. The objectives of the program include evolution of an analytical research program to evaluate effects of environment contributed contamination on precise devices"

From abstract: "On the 86-inch cyclotron a 41-kw beam has been calorimetered at a net ion loading efficiency of 40%; the average proton current was 1.85 ma at 22.5 Mev. Practical specific yields have been determined for (p,2n) reactions on zinc and bismuth. The investigation of products of proton-induced fission of uranium has been continued and new techniques are being used in measuring angular distribution of reaction products. The 63-inch heavy particle cyclotron is now in operation; N+++ particles have been accelerated to ~25 Mev. In preliminary tests, induced activities have been detected in carbon, nitrogen, and oxygen targets. A hot-cathode ion source is ready for test operation. The 22-inch cyclotron is being used in an investigation of the problems associated with the use of rf and dc electrodes for the acceleration of protons from the ion source into the dees. Radiation-induced corrosion in Inconel tubing containing #21 eutectic (ANP) has been produced by proton irradiation in the 86-inch cylclotron; it is shown that the corrosion was not due to thermal effects. Approximately 150 grams of highly purified U 238 (< 5 ppm U 235) have been prepared, and two grams of thorium 230 (ionium) has been enriched to 90.6%."

The following remarks are intended primarily to assist in the orientation of the PRP reactor control development program in a direction consistent with the basic objectives of the program as a whole, and to discuss certain aspects of particular control systems which have a bearing on the capabilities of the reactor with respect to these objectives.

Report discussing calutron charge materials that can be used for the stable separation of isotopes.

The nature and types of internal molecular and thermal motions that polymer chains and polymer segments undergo have a great bearing on the physical behavior of polymeric solids. A relatively new tool is now available that permits us to observe and study internal thermally-induced motions directly at the atomic or molecular level rather than from macroscopic observations. this tool is nuclear magnetic resonance spectroscopy. This talk discusses (1) the nature of nuclear magnetic resonance, (2) NMR line shapes and the influence of temperature, (3) NMR line widths and second moments as a function of temperature, and (4) lists six general conclusions.

Technical report with short reports on (1) Effect of radiation on organic compounds; (2) Effect of radiation on separation processes; (3) Effect of radiation on water and aqueous systems; and (4) Effect of neutrons on graphite.

A short-term study was made to investigate the removal of radioiodine vapor from air-steam mixtures as could occur immediately following a nuclear incident in a pressurized water reactor. Activated charcoal traps, designed to simulate a small section of a commercial charcoal canister, were tested at gas velocities of 23.9 to 74.9 ft/min over the temperature range of 75 to 118°C. The iodine removal efficiency was found to range from 99.80 to 99.4% with an average of 99.9%. One test performed at a temperature of 105°C and with gas velocity of 290 ft/min indicated that the iodine removal efficiency was reduced to 99.54%. Activated charcoal exhibits a high efficiency for iodine vapor removal under these test conditions and appears suitable for application in the decontamination of air-steam mixtures.