Article on a network control theory approach to modeling and optimal control of zoonoses and a case study of brucellosis transmission in sub-Saharan Africa.

This article describes the theoretical background and experimental design of new research based on previous multi-agent research on collaborative agents. The research extends the concept of agent decommitment into a resource scheduling domain. The problem is no longer time constrained, however, the number of agents is increased dramatically. The actual experimentation is yet to be performed. The authors state that results of the experimentation will be reported in a future article.

Article describes experiment in which a synergistic balance of strength and ductility was achieved in a prototypical fcc-based Al0.3CoCrFeNi complex concentrated alloy by incorporating hierarchical microstructural features into heterogeneous grain structure.

Article characterizing an assortment of photopolymers and stereolithography processes to produce 3D-printed molds and polydimethylsiloxane (PDMS) castings of micromixing devices. The study shows that 3D-printed soft tooling can provide other benefits such as multiple cross-sections and other potential layouts on a single mold.

Article examining Aluminium alloy 5083 subjected to Laser Shock Peening both with (LSP) and without protective coating (LPwC) at multiple pulse densities. A second LPwC treatment was conducted fully submersed under water, in addition to the standard laminar water flow condition. Results show that compressive residual stresses were generated in all cases, although their character varied depending on the peening strategy and method of confinement.

Article presents research that creates an automatic repetition counting system that is flexible enough to measure multiple distinct and repeating movements during physical therapy without being trained on the specific motion.

This article studies the hygroscopicity of moso bamboo (Phyllostachys edulis) with a gradient fiber structure assessed by a dynamic vapor sorption (DVS) apparatus and fitted with a Haillwood–Horrobin (H–H) model. The effects of the chemical composition, gradient fiber structure, and mesopore structure of the bamboo were also investigated. The results demonstrate that the hygroscopicity of bamboo gradually increases from the outer to the inner layer along the thickness of the culm wall, which is related to the gradient distribution of the fibers. The structure–function relationships between the chemical composition, multi-scale structure, and hygroscopicity identified in this study provide a theoretical basis for bamboo drying and storage technology, as well as the processing and application of bamboo fiber-based composites.

This article describes the synthesis of indium tin oxide (ITO) thin films using solgel processing with a mixture of InCl₃, methanol, and SnCl₂, where the solutions were spin coated onto glass substrates. The combined architecture of black phosphorus on ITO thin films shows promise in its use for transparent electronics, which can also serve as a stepping stone for future solar cell platforms.

This article reports on a fabrication process that uses silicon-oninsulator (SOI) substrates and micromachining techniques to form wide-IF superconductor–insulator–superconductor (SIS) mixer devices that have suspended metal beam leads for rf grounding. Aside from a description of the fabrication process, electrical measurements of these Nb/Al–AlNₓ /Nb trilayer devices will also be presented.

Article introduces a special issue of the International Journal of Distributed Sensor Networks.

Article compares in-plane (IP) and out-of-plane (OOP) vacancy migration mechanisms in binary Mg–X (Ca, Y, and Gd) and ternary Mg–X (Ca, Y, and Gd)–Zn alloys using density functional theory based first principles computations.

This article provides fundamental understanding of the nanocrystalline formation of undercooling TiAl melt and the deformation mechanisms in the nanocrystalline TiAl at the atomic scale.

Article discusses how sensing temperature is important for a wide variety of applications such as control systems and instrumentation which are integral to various industrial sectors and in research settings. The authors emphasize the importance of high sensitivity and reliable methods using a frequency-based approach for detecting temperature changes. In their study, Au rectangular single-arm spiral antennas with varying sizes were fabricated and RF S-parameter measurements were conducted over the frequency range of 300 kHz to 20 GHz. Alongside the experimental measurements, they also present results from their simulation analysis conducted using High Frequency Structure Simulator (HFSS) from ANSYS.

This article finds that the synergy of natural fiber with hexagonal boron nitride (hBN) could significantly improve thermal conductivity, compared with that solely using hBN.

This review article will focus on known risks following iron oxide nanoparticles (IONPs) exposure supported by human, animal, and cell culture-based studies, the potential challenges intrinsic to IONPs toxicity assessment, and how these may contribute to the poorly characterized IONPs toxicity profile.

Article discussing the semi-supervised prediction of protein subcellular localization using abstraction augmented Markov models.

Article proposes using emission spectra to investigate the purity of hematite (α-Fe₂O₃) and magnetite (Fe₃O₄).

Article discussing a methodological proposal for the quality control of precipitation data.

Article develops a a simple, fast, and powerful method, named JS-MA, based on Jensen-Shannon divergence and agglomerative hierarchical clustering, to detect the genome-wide multi-locus interactions associated with multiple diseases.

In this article the density uniformity and mechanical properties of bamboo bundle veneers were systematically evaluated by the combination of light transmittance and mechanical stiffness. It was found that the number of broomings, dippings, and high-temperature heat treatments had different effects on the bamboo bundle veneers. On this basis, the uniformity of the density and mechanical properties of the bamboo scrimber (BS) that underwent hybrid paving, and the bamboo bundle laminated veneer lumber (BLVL), were analyzed.

This article examines a rivet from the SS "John W. Brown", which was assembled in Baltimore, Maryland, and launched in September 1942. Classical metallurgical analysis of a rivet from the original 1942 vessel is compared with modern rivets used during its restoration.

Article describes study which indicates that nuclear type 2C protein phosphatase (PP2Cδ) impairs p53 acetylation and DNA damage response by compromising BRCA1 function in breast cancer development.

Article describes the compositional dependence and influence of relaxation state on the deformation behavior of a Pt–Pd-based bulk metallic glasses model system was investigated, where platinum is systematically replaced by topologically equivalent palladium atoms. Based on total scattering experiments with synchrotron X-ray radiation, a correlation between the increase in stiffer 3-atom cluster connections and reduction in strain-rate sensitivity, as a measure of ductility, with Pd content and thermal history is suggested.

Article discusses how protein based adhesive is limited by poor mechanical properties and water resistance. This simple and green preparation method provided a new strategy for the production of high-performance, multifunctional and economically effective SM based adhesive.