Carbon Dioxide Capture From Flue Gas Using Dry Regenerable Sorbents Quarterly Technical Progress Report: July-September 2002 (open access)

Carbon Dioxide Capture From Flue Gas Using Dry Regenerable Sorbents Quarterly Technical Progress Report: July-September 2002

The objective of this project is to develop a simple and inexpensive process to separate CO{sub 2} as an essentially pure stream from a fossil fuel combustion system using a regenerable sorbent. The sorbents being investigated in this project are primarily alkali carbonates, and particularly sodium carbonate and potassium carbonate, which are converted to bicarbonates through reaction with carbon dioxide and water vapor. Bicarbonates are regenerated to carbonates when heated, producing a nearly pure CO{sub 2} stream after condensation of water vapor. This quarter, electrobalance tests suggested that higher temperature calcination of trona leds to reduced carbonation activity in subsequent cycles, but that calcination in dry carbon dioxide did not result in decreased activity relative to calcination in helium. Following higher temperature calcination, sodium bicarbonate (SBC) No.3 has greater activity than either coarse or fine grades of trona. Fixed bed testing of calcined SBC No.3 at 70 C confirmed that high rates of carbon dioxide absorption are possible and that the resulting product is a mixture of Wegscheider's salt and sodium carbonate. In fluidized bed testing of supported potassium carbonate, very rapid carbonation rates were observed. Activity of the support material complicated the data analysis. A milled, spherical grade of …
Date: October 1, 2002
Creator: Green, David A.; Turk, Brian S.; Portzer, Jeffrey W.; P.Gupta, Raghubir; McMichael, William J.; Liang, Ya et al.
System: The UNT Digital Library