The twelfth international workshop on inelastic ion surface collisions was held at the Bahia Mar Resort and Conference Center on South Padre Island, Texas (USA) from January 24-29, 1999. The workshop brought together most of the leading researchers from around the world to focus on both the theoretical and experimental aspects of particle - surface interactions and related topics.

This report includes a review of the progress made in ACTF Flow Loop development and research during 90 days pre-award period (May 15-July 14, 1999) and the following three months after the project approval date (July15-October 15, 1999) The report presents information on the following specific subjects; (a) Progress in Advanced Cuttings Transport Facility design and development, (b) Progress report on the research project ''Study of Flow of Synthetic Drilling Fluids Under Elevated Pressure and Temperature Conditions'', (c) Progress report on the research project ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)'', (d) Progress report on the research project ''Study of Cuttings Transport with Aerated Muds Under LPAT Conditions (Joint Project with TUDRP)'', (e) Progress report on the research project ''Study of Foam Flow Behavior Under EPET Conditions'', (f) Progress report on the instrumentation tasks (Tasks 11 and 12) (g) Activities towards technology transfer and developing contacts with oil and service company members.

The objectives of the program are to provide an improved TBC system with increased temperature capability and improved reliability relative to current state of the art TBC systems. The development of such a coating system is essential to the ATS engine meeting its objectives. The base program consists of three phases: Phase I: Program Planning - Complete; Phase II: Development; and Phase III: Selected Specimen - Bench Test. Work is being performed in Phase II and III of the program.

As Annex 20 enters the final year, deliverables in the form of reports, guidelines, and data formats are nearing completion. The Reporting Guidelines for the Measurement of Air Flows and Related Factors in Buildings will be published by the AIVC next month and was presented to the research community at the 11th AIVC Conference. Measurement guidelines and state-of-the-art equipment descriptions are part of a comprehensive manual, Measurement Techniques Related to Air Flow Patterns Within Buildings -- An Application Guide, in the final stages of preparation in Part 2 of Annex 20, together with reports on how to estimate the effects of flow through large openings, as well as contaminant movements in buildings. The Measurement Manual will include the latest information from the AIVC. The next AIVC Conference, in Ottawa, September 1991, will feature more than 12 presentations of Annex 20 results, including the information from Part 1 which has focused on the detailed air flow patterns in a variety of single-room configurations. Both complex modelling (including CFD) and detailed measurements have been completed, and it is now desirable that added tests be made in the next months by the University of Illinois, BERL, representing the US in Part 1 for …

Some highlights are: (1) During this quarter's field trials, sand mold castings of parts and permanent mold tensile testing bars, K mold bars, and ingots were made from aluminum alloy-fly ash melts. (2) Another objective was met, i.e., to use class ''F'' type precipitator fly ash consisting of particle sizes less than 100 microns. It was possible to pour the composite melt into the sand mold through a filter. (3) Trials were run to determine the required amount of the wetting agent, magnesium, to ensure appropriate mixing of the aluminum alloy and fly ash. The magnesium content required to mix ''F'' fly ash was much lower compared to that required to mix hybrid ''C-F'' fly ash in similar melts. Fly ash particles of less than 100 microns were mixed in aluminum melt. Large scale field trials were undertaken at Eck Industries with the goal of standardizing procedures for producing aluminum-fly ash composite melts and to analyze the structure and properties of the resulting material. Limited testing of tensile properties has been done on pressure die cast parts, and attempts are underway to improve the distribution of fly ash in both sand cast and pressure die cast samples. Eck Industries performed …

Disruptions are observed in the Microwave Tokamak Experiment, MTX (nee Alcator C), over a wide range of plasma parameters. Indeed, disruptions often occur far from the boundaries of the operating space as defined by Hugill and l{sub i}-q plots. Despite this, the general behavior during the disruptive process is generally similar whatever the operating parameters. This report will describe one disruption in detail in order to provide a detailed anatomy of the event.

This paper describes an application of the U.S. Department of Energy`s (DOE) performance goal based method for the design and evaluation of structures, systems, and components (SSCS) at Fluor Daniel Hanford, Inc. (FDH). The philosophy on which DOE`s method is based has been employed to construct a graded approach to the minimum structural design and evaluation criteriz@ used at the DOE Hanford Site that complies with the DOE Order 54E;0.28, Natural Phenomena Hazards Mitigation. The FDH structural design and evaluation criteria applies to both nuclear and non-nuclear SSCs that are not covered by a reactor safety analysis report.

This report discusses the design of the vacuum system for the advanced photon source beamline front ends. Included in this report are discussions on: vacuum calculations, the differential pump; front end vacuum set points; cleaning methods and agents; and continuing and completed research and development.

ASHRAE Standard 62-1989 (Standard 62-89) Ventilation for Acceptable Indoor Air Quality'' is the new heating, ventilating, and air-conditioning (HVAC) industry consensus for ventilation air in commercial buildings. Bonneville Power Administration (Bonneville) references ASHRAE Standard 62-81 (the predecessor to Standard 62-89) in their current environmental documents for required ventilation rates. Through its use, it had become evident to Bonneville that Standard 62-81 needed interpretation. Now that the revised Standard (Standard 62-89) is available, its usefulness needs to be evaluated. Based on current information and public comment, the American Society of Heating, Refrigeration, and Air-Conditioning Engineers (ASHRAE) revised Standard 62-1981 to Standard 62-89. Bonneville's study estimated the energy and cost implications of ASHRAE Standard 62-89 using simulations based on DOE-2.1D, a computer simulation program which estimates building use hourly as a function of building characteristics and climatic location. Ten types of prototypical commercial buildings used by Bonneville for load forecasting purposes were examined: Large and Small Office, Large and Small Retail, Restaurant, Warehouse, Hospital, Hotel, School, and Grocery. These building characterizations are based on survey and energy metering data and represent average or typical construction and operation practices and mechanical system types. Prototypical building ventilation rates were varied in five steps to …

The purpose of the trip was to conduct a preliminary evaluation of biomass energy development in Yunnan Province, China. The evaluation included an assessment of the potential to grow and convert biomass to electricity, and an evaluation of the institutional relationships, which would be critical to the establishment of a collaborative biomass energy development project. This site visit was undertaken to evaluate the potential of an integrated biomass energy project, including the growing and handling of biomass feedstocks and its conversion to electricity. Based on this site visit, it was concluded that biomass production risks are real and further research on species screening and experiments is necessary before proceeding to the conversion phase of this project. The location of potential sites inspected and the logistics required for handling and transporting biomass may also be a concern. The commitment of support (labor and land) and leadership to this project by the Chinese is overwhelming exceeding all pre-site visit expectations. In sum, there is a definite opportunity in Yunnan for an integrated biomass energy project and a potential market for US technology.

We have measured the flavor ratio of ratios (R) in atmospheric neutrino interactions using a 1.52 kton-year exposure of Soudan 2. We find R = 0.67 {+-} 0.15{sub {minus}0.06}{sup +0.04}. This value is about 2{sigma} from the expected value of 1.0 and is consistent with the anomalous ratios measured by the Kamiokande and IMB experiments. We note that since our acceptance matrix is different from those of the water Cherenkov experiments we would not expect to measure the same value of R, unless R=1.

The Z-contrast technique represents a new approach to high-resolution electron microscopy allowing for the first time incoherent imaging of materials on the atomic scale. The key advantages of the technique, an intrinsically higher resolution limit and directly interpretable, compositionally sensitive imaging, allow a new level of insight into the atomic configurations of extended defects in silicon. This experimental technique has been combined with theoretical calculations (a combination of first principles, tight binding, and classical methods) to extend this level of insight by obtaining the energetic and electronic structure of the defects.

Studies of junction photoluminescence (PL) in CdTe/CdS solar cells reveal that back-contact application produces a dramatic qualitative change in the junction picosecond-PL spectrum. Prior to contact application, the spectrum has two peaks at energies of 1.501 eV and 1.457 eV, corresponding to recombination in regions of CdTeS alloy with 2% and 12% sulfur content, respectively. After contact application, the spectrum consists of a single broad peak at 1.48 eV. Previous studies have shown that the nitric-phosphoric (NP) etch used in the contact procedure produces a layer of elemental tellurium (Te) on the CdTe surface. We postulate that the change in the near-junction PL spectrum is caused by a grain-boundary field effect due to perturbations of the grain-boundary conductivity and Fermi level.

This report talks about The Beam Lifetime and Emittance Growth in RHIC under Normal Operating Conditions and with a Hydrogen Gas Jet

The existing Los Alamos National Laboratory TA-50 liquid radioactive waste treatment plant RLWP has been in service for over thirty years, during this period many technical, regulatory, and processing changes have occurred. The existing facility can no longer comply with the demands and requirements for continued operation, and would not be able to comply with anticipated stringent future contaminant discharge limitations. Either a major upgrading or replacement of the existing facility is required. In order to assess the most appropriate means of providing an adequate facility to comply with predicted requirements for Ta-50, this Best Available Technology (BAT) Study was conducted to compare feasible technical and economic alternatives in order to define the most favorable technology configuration. This report consists of eleven sections. Section 1 provides a general introduction and background of the TA-50 operations and the basis for this study. Section 2 provides a technical discussion of the unit processes at TA-50 and several other comparable operations at other DOE sites. Section 3 addresses the evaluation and selection of appropriate treatment processes. Section 4 provides an analysis of environmental issues and concerns. Section 5 presents the rationale for the selection of preferred process configurations. Section 6 is the evaluation …

The present invention is a bi-stable optical actuator device that is depowered in both stable positions. A bearing is used to transfer motion and smoothly transition from one state to another. The optical actuator device may be maintained in a stable position either by gravity or a restraining device.

In May 1985, a National Pollutant Discharge Elimination System (NPDES) permit was issued for the Oak Ridge Y-12 Plant. As a condition of the permit, a Biologicai Monitoring and Abatement Program (BMAP) was developed to demonstrate that the effluent limitations established for the Y-12 Plant protect the classified uses of the receiving stream (East Fork Poplar Creek; EFPC), in particular, the growth and propagation of aquatic life (Lear et al. 1989). A second objective of the BMAP is to document the ecological effects resulting from the implementation of a water pollution control program designed to eliminate direct discharges of wastewaters to EFPC and to minimize the inadvertent release of pollutants to the environment. Because of the compiex nature of the discharges to EFPC and the temporal and spatial variability in the composition of the discharges, a comprehensive, integrated approach to biological monitoring was developed. A new permit was issued to the Y-12 Plant on April 28, 1995 and became effective on July 1, 1995. Biological monitoring continues to be required under the new permit. The BMAP consists of four major tasks that reflect different but complementary approaches to evaluating the effects of the Y-12 Plant discharges on the aquatic integrity …

The principal objective of the Central Vacuum Unit (CVU) CO{sub 2} Huff-n-Puff (H-n-P) project is to determine the feasibility and practicality of the technology in a waterflooded shallow shelf carbonate environment. The results of parametric simulation of the CO{sub 2} H-n-P process, coupled with the CVU reservoir characterization components will determine if this process is technically and economically feasible for field implementation. The technology transfer objective of the project is to disseminate the knowledge gained through an innovative plan in support of the Department of Energy`s (DOE) objective of increasing domestic oil production and deferring the abandonment of shallow shelf carbonate (SSC) reservoirs. Tasks associated with this objective are carried out in what is considered a timely effort for near-term goals.

In recognition of the increasing pressures upon the nation`s coastal resources, Congress enacted the Coastal Zone Management Act in 1972. Its purpose is to encourage states to preserve, protect, develop, and, where possible, restore or enhance such valuable natural resources as wetlands, floodplains, estuaries, beaches, dunes, barrier islands, and coral reefs, as well as the fish and wildlife utilizing those habitats. A unique feature of the Act is that participation by states is voluntary. One key provision for encouraging states to participate is the availability of federal financial assistance to any coastal state or territory, including those on the Great Lakes, which is willing to develop and implement a comprehensive coastal management program. Additionally, the Coastal Barrier Resources Act (CBRA) was passed in 1983. This report contains the legislative history and statues associated with each Act. Regulations for implementation and other guidance are included.

In this note the authors describe the results of some tests of the message-passing performance of the Intel Paragon. These tests have been carried out under both the Intel-supplied OSF/1 operating system with an NX library, and also under an operating system called SUNMOS (Sandia UNM Operating System). For comparison with the previous generation of Intel machines, they have also included the results on the Intel Touchstone Delta. The source code used for these tests is identical for all systems. As a result of these tests, the authors can conclude that SUNMOS demonstrates that the Intel Paragon hardware is capable of very high bandwidth communication, and that the message coprocessor on Paragon nodes can be used to give quite respectable latencies. Further tuning can be expected to yield even better performance.

Results are presented here from several two dimensional numerical calculations of events in Type II supernovae. A new 2-D hydrodynamics and neutrino transport code has been used to compute the effect on the supernova explosion mechanism of convection between the neutrinosphere and the shock. This convection is referred to as exterior convection to distinguish it from convection beneath the neutrinosphere. The model equations and initial and boundary conditions are presented along with the simulation results. The 2-D code was used to compute an exterior convective velocity to compare with the convective model of the Mayle and Wilson 1-D code. Results are presented from several runs with varying sizes of initial perturbation, as well as a case with no initial perturbation but including the effects of rotation. The M&W code does not produce an explosion using the 2-D convective velocity. Exterior convection enhances the outward propagation of the shock, but not enough to ensure a successful explosion. Analytic estimates of the growth rate of the neutron finger instability axe presented. It is shown that this instability can occur beneath the neutrinosphere of the proto-neutron star in a supernova explosion with a growth time of {approximately} 3 microseconds. The behavior of the …

This Corrective Action Investigation Plan (CAIP) has been developed in accordance with the Federal Facility Agreement and Consent Order (FFACO) that was agreed to by the US Department of Energy, Nevada Operations Office (DOE/NV); the State of Nevada Division of Environmental Protection (NDEP); and the US Department of Defense (FFACO, 1996). The CAIP is a document that provides or references all of the specific information for investigation activities associated with Corrective Action Units (CAUs) or Corrective Action Sites (CASs). According to the FFACO, CASs are sites potentially requiring corrective action(s) and may include solid waste management units or individual disposal or release sites (FFACO, 1996). Corrective Action Units consist of one or more CASs grouped together based on geography, technical similarity, or agency responsibility for the purpose of determining corrective actions. This CAIP contains the environmental sample collection objectives and the criteria for conducting site investigation activities at CAU 486, the Double Tracks Radiological Safety (RADSAFE) Area (DTRSA) which is located on the Nellis Air Force Range 71North (N), west of the Tonopah Test Range (TTR). The TTR, included in the Nellis Air Force Range Complex, is approximately 255 kilometers (km) (140 miles [mi]) northwest of Las Vegas, Nevada (Figure …

The Oak Ridge Centers for Manufacturing Technology (ORCMT) and Environmental Systems Corporation (ESC) have collaborated on an effort to develop the optical system for an enhanced particulate emission monitor. The purpose of this effort was to assist a small East Tennessee company in perfecting an instrument that would meet or exceed the performance of competing foreign instruments and provide measurement capabilities necessary to assure compliance of Department of Energy facilities and other industrial facilities with expected EPA regulations. The two parties collaborated on design, assembly, and bench testing of the prototype instrument. The prototype system was targeted to have the capability for measuring micron size particles in concentrations as low as 10 micrograms per cubic meter and to have the added benefit of improving sampling statistics (i.e. measurements will be made over larger regions of the stack) over current instruments. Project deliverables were a prototype optical system and characterization data.

Solid D-T fuel smoothly layered on the interior of spherical capsules is required for all inertial confinement fusion ignition target designs. One process for forming these layers, beta-layering, has been studied in surrogate geometries such as open cylinders or tori to allow accurate characterization of the DT surfaces. We present the first results from beta layering in 1 mm spherical containers, such as will be used in upcoming Omega experiments. These results are also directly relevant to ignition capsules for the National Ignition Facility. We find that layers can form with roughness as small as 1.2 microns rms, and that results are strongly dependent upon freezing rate as well as layer thickness.