The acceptance test procedure (ATP) for the compressed air system at building 241-AW-273 was completed on March 11, 1993. The system was upgraded to provide a reliable source of compressed air to the tank farm. The upgrade included the demolition of the existing air compressor and associated piping, as well as the installation of a new air compressor with a closed loop cooling system. A compressed air cross-tie was added to allow the process air compressor to function as a back-up to the existing instrument air compressor. The purpose of the ATP was to achieve three primary objectives: verify system upgrade in accordance with the design media; provide functional test of system components and controls; and prepare the system for the Operational Test. The ATP was successfully completed with thirteen exceptions, which were resolved prior to completing the acceptance test. The repaired exceptions had no impact to safety or the environment and are briefly summarized. Testing ensured that the system was installed per design, that its components function as required and that it is ready for operational testing and subsequent turnover to operations.

OAK B139 The postgenomic era is arriving faster than anyone had imagined--sometime during 2000 we'll have a large fraction of the human genome sequence. Heretofore, our understanding of function has come from non-industrial experiments whose conclusions were largely framed in human language. The advent of large amounts of sequence data, and of ''functional genomic'' data types such as mRNA expression data, have changed this picture. These data share the feature that individual observations and measurements are typically relatively low value adding. Such data is now being generated so rapidly that the amount of information contained in it will surpass the amount of biological information collected by traditional means. It is tantalizing to envision using genomic information to create a quantitative biology with a very strong data component. Unfortunately, we are very early in our understanding of how to ''compute on'' genomic information so as to extract biological knowledge from i t. In fact, some current efforts to come to grips with genomic information often resemble a computer savvy library science, where the most important issues concern categories, classification schemes, and information retrieval. When exploring new libraries, a measure of cataloging and inventory is surely inevitable. However, at some point we …

The postgenomic era is arriving faster than anyone had imagined-- sometime during 2000 we'll have a large fraction of the human genome sequence. Heretofore, our understanding of function has come from non-industrial experiments whose conclusions were largely framed in human language. The advent of large amounts of sequence data, and of "functional genomic" data types such as mRNA expression data, have changed this picture. These data share the feature that individual observations and measurements are typically relatively low value adding. Such data is now being generated so rapidly that the amount of information contained in it will surpass the amount of biological information collected by traditional means. It is tantalizing to envision using genomic information to create a quantitative biology with a very strong data component. Unfortunately, we are very early in our understanding of how to "compute on" genomic information so as to extract biological knowledge from it. In fact, some current efforts to come to grips with genomic information often resemble a computer savvy library science, where the most important issues concern categories, classification schemes, and information retrieval. When exploring new libraries, a measure of cataloging and inventory is surely inevitable. However, at some point we will need …

This report summarizes the US Department of Energy`s (DOE) cultural resource studies that were undertaken in support of the DOE`s Uranium Mill Tailings Remedial Action (UMTRA) Project in the state of Colorado for the period of October 1, 1991, through September 30, 1992. This report fulfills the DOE`s obligation to provide an annual report to the state of Colorado on the status and results of cultural resource studies conducted during the above period of record. This requirement is stated in a programmatic memorandum of agreement executed between the DOE, the Advisory Council on Historic Preservation, and the Colorado State Historic Preservation Officer in December 1984. Previous reports were based on a calendar year reporting period. However, in order to be more consistent with the programmatic memorandum of agreement, the period of record for this and subsequent annual reports has been changed to the Federal fiscal year. The current status and summaries of 1992 cultural resource surveys are provided for all UMTRA Project sites in Colorado. The sites are Durango, Grand Junction, Gunnison, Maybell, Naturita, Rifle, and Slick Rock.

This report provides sinformation on energy consumption in Federal buildings and operations and documents activities conducted by Federal agencies to meet statutory requirements of the National Energy Conservation Policy Act. It also describes energy conservation and management activities of the Federal Government under section 381 of the Energy Policy and Conservation Act. Implementation activities undertaken during FY94 by the Federal agencies under the Energy Policy Act of 1992 and Executive Orders 12759 and 12902 are also described. During FY94, total (gross) energy consumption of the US Government, including energy consued to produce, process, and transport energy, was 1.72 quadrillion Btu. This represents {similar_to}2.0% of the total 85.34 quads used in US.

This paper presents an idea for a magnet system that could be used to advantage in tokamaks and other fusion engineering devices. Higher performance designs, specifically newer tokamaks such as those for the international Tokamak Engineering Reactor (ITER) and Tokamak Physics Experiment (TPX) use Cable in Conduit Conductor (CICC) forced flow coils to advantage to meet field and current density requirements. Pool boiling magnets lack structural integrity to resist high magnetic forces since helium cooling areas must surround each conductor. A second problem is that any leak can threaten the voltage standoff integrity of the magnet system. This is because a leak can result in low-pressure helium gas becoming trapped by limited conductance in the magnet bundle and low-pressure helium has poor dielectric strength. The system proposed here is basically a CICC system, with it`s inherent advantages, but bathed in higher pressure supercritical helium to eliminate the leak and voltage break-down problems. Schemes to simplify helium coolant plumbing with the proposed system are discussed. A brief historical review of related magnet systems is included. The advantages and disadvantages of using higher pressure, supercritical helium in combination with solid electrical insulation in a CICC system are discussed. Related electrical data from …

Under this contract the authors have contributed to ITER edged plasma physics by improving the numerics and the organization of the B2.5 edge plasma code, by applying the code in a systematic study of the effect of deliberately introduced impurities upon the divertor heat load, by collaborating with colleagues at IPP Garching in their studies of the ITER divertor using the B2/EIRENE code system and in their model validation studies, and by kinetic studies of the possible beneficial effects of magnetic perturbations upon divertor heat load. In regard to the effect of recycling impurities their modeling indicates that it will be possible to radiate up to 200 MW in the edge plasma and divertor if the edge density is sufficiently high ({approx_equal} 6.0 {times} 10{sup 19}/m{sup 3}) and if there is maintained a concentration of 1.0% neon or 0.5% argon. This implies that an acceptable working point for ITER may just barely be possible with credit for bremsstrahlung and edge radiation alone, and a robust working point appears possible if consideration is given also to core plasma impurity radiation. In regard to the effect of magnetic perturbations they find that a scenario that relies on external windings requires coils no …

None

The presence of potassium or calcium in sol gel catalysts increase the production of C{sub 4} hydrocarbon and that of methane while maintaining high activities. Characterization of catalysts using temperature programmed desorption of carbon dioxide indicates that activity and product distribution over an isosynthesis catalyst depend on its acid-base properties. Low activity was observed for catalysts with very weak basicity, and high oxygenate production for catalysts with strong basicity. An optimum strength of basic sites is crucial to achieve high activity while minimizing the amount of oxygenates. A kinetic model was developed based on the reaction mechanisms, and the simulation from the model produces reasonable fit with the experimental data.

A future nuclear energy scenario with a closed, thorium-uranium-oxide (ThUOX) fuel cycle and new light water reactors (TULWRs) supported by Accelerator Transmutation of Waste (ATW) systems could provide several improvements beyond today's once-through, UO{sub 2}-fueled nuclear technology. A deployment scenario with TULWRs plus ATWs to burn the actinides produced by these LWRs and to close the back-end of the ThUOX fuel cycle was modeled to satisfy a US demand that increases linearly from 80 GWe in 2020 to 200 GWe by 2100. During the first 20 years of the scenario (2000-2020), nuclear energy production in the US declines from today's 100 GWe to about 80 GWe, in accordance with forecasts of the US DOE's Energy Information Administration. No new nuclear systems are added during this declining nuclear energy period, and all existing LWRs are shut down by 2045. Beginning in 2020, ATWs that transmute the actinides from existing LWRs are deployed, along with TULWRs and additional ATWs with a support ratio of 1 ATW to 7 TULWRs to meet the energy demand scenario. A final mix of 174 GWe from TULWRs and 26 GWe from ATWs provides the 200 GWe demand in 2100. Compared to a once-through LWR scenario that …

The purpose of this lecture is to discuss in detail the generalized approach of Kawashima and Gubernatis for the construction of cluster algorithms. We first present a brief refresher on the Monte Carlo method, describe the Swendsen-Wang algorithm, show how this algorithm follows from the Fortuin-Kastelyn transformation, and re=interpret this transformation in a form which is the basis of the generalized approach. We then derive the essential equations of the generalized approach. This derivation is remarkably simple if done from the viewpoint of probability theory, and the essential assumptions will be clearly stated. These assumptions are implicit in all useful cluster algorithms of which we are aware. They lead to a quite different perspective on cluster algorithms than found in the seminal works and in Ising model applications. Next, we illustrate how the generalized approach leads to a cluster algorithm for world-line quantum Monte Carlo simulations of Heisenberg models with S = 1/2. More succinctly, we also discuss the generalization of the Fortuin- Kasetelyn transformation to higher spin models and illustrate the essential steps for a S = 1 Heisenberg model. Finally, we summarize how to go beyond S = 1 to a general spin, XYZ model.

This document provides estimates of average annual radiation worker exposures for the 200 Areas of the Hanford Site for various facilities. The period of exposures extends from calendar year 1978 through 1993. These estimates were extracted from annual dosimetry reports.

The conference began with an introductory lecture by Bunakov. It is very appropriate that this workshop be held in Dubna as Bunakov reminded us that the experiments that motivated the current interest in the study of symmetry violation with neutrons were started here at Dubna by Alfimenkov, Pikelner, and collaborators. Bunakov discussed the fact that is the complexity of the compound nucleus that leads to large enhancement of parity violation near P-resonances and to the possibility of using statistical models to relate the measured parity violation to more-fundamental quantities. He also pointed out that it is a rare case in which complexity aids us. Bunakov did not point out that this is an example of another rare phenomena -- where theory has predicted correctly in advance the parity violating effects seen near p-resonances. As long ago as 1969, Karmanov and Lobov first predicted an enhancement of {gamma}-ray circular polarization near p-resonances. Sushkov and Flambaum later predicted asymmetries P {approximately} 10{sup {minus}2} for p-resonances and suggested {sup 117}Sn, {sup 139}La, {sup 232}Th, and {sup 238}U for study. Bunakov and Gudkov developed a theory describing the energy dependence of parity-violating effects over a large energy range. This theory predicted random signs for …

During the operation of the Low Level Radioactive Waste Disposal Facility (LLRWDF), large amounts (greater than 100 kg) of enriched uranium (EU) were buried. This EU came primarily from the closing and decontamination of the Naval Fuels Facility in the time period from 1987--1989. Waste Management Operations (WMO) procedures were used to keep the EU boxes separated to prevent possible criticality during normal operation. Closure of the LLRWDF is currently being planned, and waste stabilization by Dynamic Compaction (DC) is proposed. Dynamic compaction will crush the containers in the LLRWDF and result in changes in their geometry. Research of the LLRWDF operations and record keeping practices have shown that the EU contents of trenches are known, but details of the arrangement of the contents cannot be proven. Reviews of the trench contents, combined with analysis of potential critical configurations, revealed that some portions of the LLRWDF can be expected to be free of criticality concerns while other sections have credible probabilities for the assembly of a critical mass, even in the uncompacted configuration. This will have an impact on the closure options and which trenches can be compacted.

During the operation of the Low Level Radioactive Waste Disposal Facility (LLRWDF), large amounts (greater than 100 kg) of enriched uranium (EU) were buried. This EU came primarily from the closing and decontamination of the Naval Fuels Facility in the time period from 1987--1989. Waste Management Operations (WMO) procedures were used to keep the EU boxes separated to prevent possible criticality during normal operation. Closure of the LLRWDF is currently being planned, and waste stabilization by Dynamic Compaction (DC) is proposed. Dynamic compaction will crush the containers in the LLRWDF and result in changes in their geometry. Research of the LLRWDF operations and record keeping practices have shown that the EU contents of trenches are known, but details of the arrangement of the contents cannot be proven. Reviews of the trench contents, combined with analysis of potential critical configurations, revealed that some portions of the LLRWDF can be expected to be free of criticality concerns while other sections have credible probabilities for the assembly of a critical mass, even in the uncompacted configuration. This will have an impact on the closure options and which trenches can be compacted.

This report describes the overall accomplishments and benefits of Solar Electric Specialties Co. (SES) under this Photovoltaic Manufacturing Technology (PVMaT) subcontract. SES addressed design issues related to their modular autonomous PV power supply (MAPPS) and a mobile photogenset. MAPPS investigations included gel-cell batteries mounted horizontally; redesign of the SES power supply; modified battery enclosure for increased safety and reduced cost; programmable, interactive battery charge controllers; and UL and FM listings. The photogenset systems incorporate generators, battery storage, and PV panels for a mobile power supply. The unit includes automatic oil-change systems for the propane generators, collapsible array mounts for the PV enclosure, and internal stowage of the arrays. Standardizing the products resulted in product lines of MAPPS and Photogensets that can be produced more economically and with shorter lead times, while increasing product quality and reliability. Product assembly and quality control have also been improved and streamlined with the development of standardized assembly processes and QC testing procedures. SES offers the UL-listed MAPPS at about the same price as its previous non-standardized, unlisted products.

A design study for the extraction system of the 3rd Generation super conducting ECR ion source at LBNL is presented. The magnetic design of the ion source has a mirror field of 4 T at the injection and 3 T at the extraction side and a radial field of 2.4 T at the plasma chamber wall. Therefore, the ion beam formation takes place in a strong axial magnetic field. Furthermore the axial field drops from 3 T to 0.4 T within the first 30 cm. The influence of the high magnetic field on the ion beam extraction and matching to the beam line is investigated. The extraction system is first simulated with the 2D ion trajectory code IGUN with an estimated mean charge state of the extracted ion beam. These results are then compared with the 2D code AXCEL-INP, which can simulate the extraction of ions with different charge states. Finally, the influence of the strong magnetic hexapole field is studied with the three dimensional ion optics code KOBRA. The introduced tool set can be used to optimize the extraction system of the super conducting ECR ion source.

The availability of meteorological data in various forms has increased in recent years due to improved communication and expanded computational storage. At the Savannah River Technology Center of the Savannah River Site, a considerable amount of data form Weather Services International is collected and archived on a daily basis.

In this paper, we have studied the effect of high-resistance SnO2 buffer layers, deposited by low-pressure chemical-vapor deposition, on CdS/CdTe device performance. Our results indicate that when CdS/CdTe devices have a very thin layer of CdS or no CdS at all, the i-SnO2 buffer layer helps to increase device efficiency. When the CdS layer is thicker than 600{angstrom}, the device performance is dominated by CdS thickness, not the i-SnO2 layer. If a very thin CdS layer is to be used to enhance device performance, we conclude that a better SnO2 buffer layer is needed.

The reconstruction of the surface of disordered carbons was examined by heating carbons derived from polymethacrylonitrile (PMAN) and divinylbenzene (DVB) with a pulsed infrared laser in an argon or helium atmosphere, both fluidized and under static conditions. By graphitizing the outer surface of the carbons, it was hoped to reduce the high first-cycle losses associated with such disordered materials in Li-ion cells. The power to the sample was varied to observed the effects on surface morphology and electrochemical performance in 1M LiPF{sub 6} ethylene carbonate-dimethyl carbonate. The use various reactive atmosphere such as ethylene, 2-vinylpyridine, pyrrole, and furfuryl alcohol were also evaluated as an alternative means of hopefully forming a thin graphitic layer on the carbon particles to reduce first-cycle irreversibility. While some improvement was realized, these losses were still unacceptably high. The laser heating did improve the rate capabilities of the carbons, however. More work in this area is necessary to fully understand surface and bulk effects.

In this paper we consider the problem of simulating simple control laws involving large numbers of mobile robots. Such simulation can be computationally prohibitive if the number of robots is large enough, say 1 million, due to the 0(N2 ) cost of each time step. This work therefore uses hierarchical tree-based methods for calculating the control law. These tree-based approaches have O(NlogN) cost per time step, thus allowing for efficient simulation involving a large number of robots. For concreteness, a decentralized control law which involves only the distance and bearing to the closest neighbor robot will be considered. The time to calculate the control law for each robot at each time step is demonstrated to be O(logN).

Environmental projects, issues, and programs have become increasingly important to the Westinghouse Savannah River Company (WSRC) management and the Department of Energy (DOE). A compliance-tracking system has been developed to monitor environmental requirements and commitments because they have become increasingly complex and numerous. An Environmental Data Management (EDM) steering committee was formed in October 1987 to develop computer system solutions to environmental needs. The committee`s main objective is to coordinate, within SRS divisions, the separate efforts that have been or are being developed to meet regulatory requirements and specific programmatic goals. The Environmental and Graphical Information Systems (E&GIS) Program was recently developed to establish a more formal organizational structure and enhance the coordination of geographical information systems (GIS) and environmental data management (EDM) activities at SRS. The general strategy of the program is to establish a coordination focal point for GIS and EDM activities, to provide for the integration of the several environmental and graphical information systems which exist mostly in stand-alone arrangements, and to guide the development of data management and geographical information applications in order to achieve alignment with Site computing architecture and standards. The E&GIS Program will enhance the Site`s ability to respond to data requirements in …

Due to the commitment and participation of more than 100 professionals from site environmental coordinators, customer improvements and total quality are being incorporated into the Environmental Implementation Plan (EIP). The EIP is now a living document that communicates an overview of site environmental programs and the facility plans that are designed to protect the environment and meet changing regulatory requirements. Continuous improvement of environmental programs is enhanced through planned quarterly self-assessments during the {open_quotes}Reflections{close_quotes} process. Through the sharing of noteworthy practices, lessons learned, and ideas for improvement, the EIP provides a framework for environmental professionals to promote cost effective solutions and program improvements through teamwork and communication. These efforts were initiated by the Central Environmental Committee Executive Committee (CECEC) and developed and coordinated by the EIP subcommittee. The EIP revision process is the baseline for a continuous improvement cycle. Although the EIP is a Westinghouse Savannah River Company (WSRC) document, the environmental-planning process involves and will benefit all site contractors. Together, we are committed to a {open_quotes}Partnership in Environmental Excellence.{close_quotes}

A major goal of this research was to quantify the interactions between UVR, ozone and aerosols. One method of quantification was to calculate sensitivity coefficients. A novel aspect of this work was the use of Automatic Differentiation software to calculate the sensitivities. The authors demonstrated the use of ADIFOR for the first time in a dimensional framework. Automatic Differentiation was used to calculate such quantities as: sensitivities of UV-B fluxes to changes in ozone and aerosols in the stratosphere and the troposphere; changes in ozone production/destruction rates to changes in UV-B flux; aerosol properties including loading, scattering properties (including relative humidity effects), and composition (mineral dust, soot, and sulfate aerosol, etc.). The combined radiation/chemistry model offers an important test of the utility of Automatic Differentiation as a tool in atmospheric modeling.