Heavy duty truck engines must meet stringent life cycle cost and regulatory requirements. Meeting these requirements has resulted in convergence on 4-stroke 6-in-line, turbocharged, and after-cooled engines with direct-injection combustion systems. These engines provide much higher efficiencies (42%, fuel consumption 200 g/kW-hr) than automotive engines (31%, fuel consumption 270 g/kW-hr), but at higher initial cost. Significant near-term diesel engine improvements are necessary and are spurred by continuing competitive, Middle - East oil problems and Congressional legislation. As a result of these trends and pressures, Caterpillar has been actively pursuing a low-fuel consumption engine research program with emphasis on product quality through process control and product inspection. The goal of this project is to combine the nondestructive evaluation and computational resources and expertise available at LLNL with the diesel engine and manufacturing expertise of the Caterpillar Corporation to develop in-process monitoring and inspection techniques for diesel engine combustion chamber components and materials. Early development of these techniques will assure the optimization of the manufacturing process by design/inspection interface. The transition from the development stage to the manufacturing stage requires a both a thorough understanding of the processes and a way of verifying conformance to process standards. NDE is one of the …

A low-dimensional Hamiltonian model is derived for the acceleration of ions in finite amplitude Alfven waves in a finite pressure plasma sheet. The reduced low-dimensional wave-particle Hamiltonian is useful for describing the reaction of the accelerated ions on the wave amplitudes and phases through the self-consistent fields within the envelope approximation. As an example, the authors show for a single Alfven wave in the central plasma sheet of the Earth`s geotail, modeled by the linear pinch geometry called the Harris sheet, the time variation of the wave amplitude during the acceleration of fast protons.

Seven holes were drilled and wells (H-19b0, H-19b2, H-19b3, H-19b4, H-19b5, H-19b6, and H-19b7) were constructed on the H-19 hydropad to conduct field activities in support of the Culebra Transport Program. These wells were drilled and completed on the Waste Isolation Pilot Plant (WIPP) site during February to September 1995. An eighth hole, H-19b1, was drilled but had to be abandoned before the target depth was reached because of adverse hole conditions. The geologic units penetrated at the H-19 location include surficial deposits of Holocene age, rocks from the Dockum Group of Upper Triassic age, the Dewey Lake Redbeds, and Rustler Formation of the Permian age. The Rustler Formation has been further divided into five informal members which include the Forty-niner Member, Magenta Member, Tamarisk Member, Culebra Dolomite Member, and an unnamed lower member. The Rustler Formation, particularly the Culebra Dolomite Member, is considered critical for hydrologic site characterization. The Culebra is the most transmissive saturated unit above the WIPP repository and, as such, is considered to be the most likely pathway for radionuclide transport to the accessible environment in the unlikely event the repository is breached. Seven cores from the Culebra were recovered during drilling activities at the H-19 …

This report presents the results of a sealed tube stability study on twenty-one refrigerant-lubricant mixtures selected from the following groupings: HFCs R-32, R-125, R-134, R-134a, R-143a, and R-152a with one or more lubricants selected from among three pentaerythritol esters and three polyalkylene glycols. All lubricants were carefully predried to 25 ppm or less moisture content. HCFCs R-22, R-123, R-124, and R-142b, as well as CFC R-11, with one or more lubricants selected from among two mineral oils and one alkylbenzene fluid. Bach test mixture was aged at three temperature levels.

This report presents the results of a sealed tube stability study on twenty-one refrigerant-lubricant mixtures selected from the following groupings: HFCs R-32, R-125, R-134, R-134a, R-143a, and R-152a with one or more lubricants selected from among three pentaerythritol esters and three polyalkylene glycols. All lubricants were carefully predried to 25 ppm or less moisture content. HCFCs R-22, R-123, R-124, and R-142b, as well as CFC R-11, with one or more lubricants selected from among two mineral oils and one alkylbenzene fluid. Bach test mixture was aged at three temperature levels.

Toxicological consequences were calculated for a postulated maximum caustic soda (NaOH) solution spray leak during addition to a waste tank to adjust tank pH. Although onsite risk guidelines were exceeded for the unmitigated release, site boundary consequences were below the level of concern. Means of mitigating the release so as to greatly reduce the onsite consequences were recommended. Consequences for the mitigated release were estimated and both onsite and offsite consequences were found to negligible.

This Criticality Safety Evaluation allows a mix of up to five pin containers plus two assemblies in the same Core Component Container.

The Dzero detector is scheduled for a major upgrade between 1996 and 1999. This note describes the specifications and configuration of the physical Input/Output devices and instrumentation of the 2 Tesla Superconducting Solenoid. The Solenoid and the VLPC cryostats both reside on the detector platform and are cooled by the Dzero Helium Refrigerator. The cryogenic process control s for these two components will be an extension of the TI565 programmable logic controller system used for other Dzero cryogenic controls. Two Input/Output Bases will be installed on the Dzero detector platform near the cryo corner. These I/O bases will handle all the sensor input and process control output devices from the Solenoid and VLPC cryostats. Having the I/O bases installed on the detector platform makes the connecting cabl ing to the platform much easier . All the instruments are wired directly to the I/O base. The bases have only one communications network cabl e that must be routed off the platform to the South side of the Dzero building.

None

At the request of the International Atomic Energy Agency (IAEA), representing eleven international agencies which are sponsoring the 1991 Helsinki Symposium on Electricity and the Environment, I traveled to Brussels to participate in the second meeting of one of four advisory groups established to prepare for the Symposium. At the meeting, I was involved in a review of a draft issue paper being prepared for the Symposium and of the Symposium program.

EQ6 is a FORTRAN computer program in the EQ3/6 software package (Wolery, 1979). It calculates reaction paths (chemical evolution) in reacting water-rock and water-rock-waste systems. Speciation in aqueous solution is an integral part of these calculations. EQ6 computes models of titration processes (including fluid mixing), irreversible reaction in closed systems, irreversible reaction in some simple kinds of open systems, and heating or cooling processes, as well as solve ``single-point`` thermodynamic equilibrium problems. A reaction path calculation normally involves a sequence of thermodynamic equilibrium calculations. Chemical evolution is driven by a set of irreversible reactions (i.e., reactions out of equilibrium) and/or changes in temperature and/or pressure. These irreversible reactions usually represent the dissolution or precipitation of minerals or other solids. The code computes the appearance and disappearance of phases in solubility equilibrium with the water. It finds the identities of these phases automatically. The user may specify which potential phases are allowed to form and which are not. There is an option to fix the fugacities of specified gas species, simulating contact with a large external reservoir. Rate laws for irreversible reactions may be either relative rates or actual rates. If any actual rates are used, the calculation has a time …

None

This report reviews research program at cern; research program at fermilab; and proposals for experiments and detector systems at the SSC.

During the first week of this effort, an Alpkem RFA-300 4-channel automated chemical analyzer was transferred to the basement of building 42 at TA-46 for the purpose of performing extraction studies. Initially, this instrumentation was applied to soil samples known to contain DNA. Using the SFA (Segmented Flow Analysis) technique, several fluidic systems were evaluated to perform on-line filtration of several varieties of soil obtained from Cheryl Kuske and Kaysie Banton (TA-43, Bldg. 1). Progress reports were issued monthly beginning May 15, 1996. Early in 1997 there was a shift from the conventional 2-phase system (aqueous + air) to a 3-phase system (oil + aqueous + air) to drastically reduce sample size and reagent consumption. Computer animation was recorded on videotape for presentations. The time remaining on the subcontract was devoted to setting up existing equipment to incorporate the 3rd phase (a special fluorocarbon oil obtained from DuPont).

The CRS report describes the battle with natural gas companies on helium gas, being wasted, and released into the environment. Incentives were put in place for natural gas companies sell this helium to the government and for it to be stored in a government facility. Consequently, this also brought up controversy for why funding is being used to store a surplus of helium. Congress would debate on whether government involvement was the best option and a consensus was reached to fund the National Academy of Science to find the best way to dispose of the helium. Their results of their studies and the H.R. 4168 bill that was passed are also described.

Public concern has been expressed about possible health risks arising from exposure to the electric and magnetic fields generated power distribution systems. This project is addressing this concern through a laboratory research program designed to evaluate the effects of brief exposure to known field conditions on multiple measures of human function. In previous research, we found that exposure had statistically significant effects on physiological measures of cardiac and brain activity, and on performance measures of reaction time and performance accuracy. Effects were seen more clearly under intermittent exposure conditions, and at certain levels of electric and magnetic field strength. In this continuation effort, we are performing a series of exploratory studies, to be followed by a confirmatory experiment, to determine if the above physiological effects differ as a function of exposure to the electric and magnetic fields separately and combined, time of day, and rate of intermittent exposure. Further studies will explore the mechanisms underlying these effects. The information developed in this project will be of value in risk assessment activities, and in basic research aimed at identifying specific factors involved in the interaction of power line fields with the human system. In this reporting period our goals were to: …

Top quarks produced in high-energy collisions should exhibit a parity-conserving spin polarization normal to the production plane which can be measured by the asymmetry in their leptonic decays. A portion of this effect, which can be calculated in perturbation theory, is attributable to the quark`s QCD interactions. In addition, there is a component of the polarization due to the Yukawa coupling (g{sub Y} {congruent} m{sub T}/(250 GeV)) of the top quark with the Higgs sector. We can demonstrate the interplay of QCD and Yukawa forces in the polarization for e{sup +}e{sup {minus}} {yields} 4 T{bar T}. Assuming M{sub H} > 2M{sub T} and that the Higgs particle is not discovered before the top quark, measurement of top quark polarization in e{sup +}e{sup {minus}} or hadron-hadron collisions can be used to specify an approximate mass for the Higgs and guide direct searches.

This report summarizes research conducted by ITI to evaluate the commercialization potential of EG G Mound Applied Technologies' heat treatment process of high strength materials. The remainder of the report describes the nature of demand for maraging steel, extent of demand, competitors, environmental trends, technology life cycle, industry structure, and conclusion. (JL)

C++ is the first object-oriented programming language which produces sufficiently efficient code for consideration in computation-intensive physics and engineering applications. In addition, the increasing availability of massively parallel architectures requires novel programming techniques which may prove to be relatively easy to implement in C++. For these reasons, Division 1541 at Sandia National Laboratories is devoting considerable resources to the development of C++ libraries. This document describes the first of these libraries to be released, PHYSLIB, which defines classes representing Cartesian vectors and (second-order) tensors. This library consists of the header file physlib.h, the inline code file physlib.inl, and the source file physlib.C. The library is applicable to both three-dimensional and two-dimensional problems; the user selects the 2-D version of the library by defining the symbol TWO D in the header file physlib.h and recompiling physlib.C and his own code. Alternately, system managers may wish to provide duplicate header and object modules of each dimensionality. This code was produced under the auspices of Sandia National Laboratories, a federally-funded research center administered for the United States Department of Energy on a non-profit basis by AT T. This code is available to US citizens, and institutions under research, government use and/or commercial license …

I attended the Power Electronic Building Block (PEBB) workshop at DOE HQ on June 21,1995. Accompanying me was Doug Hopkins, who is contracting with the Lab through Mark Newton on power electronics. The PEBB concept, and the workshop in particular, are sponsored by the Office of Naval Research (ONR) and DOE. The general concept behind PEBB is a ``second electronics revolution`` facilitated by a single-package, smart, multi-function power control block. The PEBB will potentially replace all conventional power electronic elements at scales from watts to megawatts, thus shifting power engineering from circuit design to system design. ONR is interested because power distribution aboard ships is expensive, complex, and bulky, and getting worse. The same applies to aircraft and many other military systems. DOE`s interest is in electric vehicles, utility power systems, and various end-use applications such as adjustable speed drives. There was obvious enthusiasm from industry, academia, and Government at this workshop. The PEBB concept is in its infancy. Exactly what a PEBB will encompass is still up for discussion. What is certain is that everything is up to industry: standards, innovations, marketing strategies, etc. ONR and DOE are only acting as facilitators and coordinators, and perhaps offering a little …

The development of coal-fired magnetohydrodynamic (MHD) power can be viewed as consisting of two parts; the topping cycle and the bottoming cycle. The topping cycle consists of the coal combustor, MHD generator and associated components. The bottoming cycle consists of the heat recovery, steam generation, seed recovery/regeneration, emissions control (gas and particulate), ash handling and deposition, and materials evaluation. The report concentrates on the bottoming cycle, for which much of the technology was developed at the University of Tennessee Space Institute (UTSI). Because of the complexity of the required technology, a number of issues required investigation. Of specific concern regarding the bottoming cycle, was the design of the steam cycle components and emissions control. First, the high combustion temperatures and the use of large quantities of potassium in the MHD combustor results in a difference in the composition of the gases entering the bottoming cycle compared to conventional systems. Secondly, a major goal of the UTSI effort was to use a variety of coals in the MHD system, especially the large reserves of high-sulfur coals available in the United States.

Testing was carried out in the Engineering Testing Laboratory, 305 Building- 300 Area, during June, July and August of 1996. This testing was to develop and proof test a new sampler insert which would prevent purge gas from flowing through a push-mode core drilling bit - and subsequently prevent rotation of the Rotary Mode Core Sampling System (RMCSS) when the push bit was used. The testing involved push-mode sampling with both a new push mode insert and a rotary insert in a push mode bit into two simulants. A total of sixty final test runs showed that the inserts are sucessful in preventing purge flow and hence in preventing rotation with a push-mode bit installed.

The study of biocorrosion of aluminum and its alloy was performed under conditions of continuous fermentation of thermophilic anaerobic microorganisms of different groups. This allowed us to examine the effect of various types of metabolic reactions of reduction-oxidation proceeding at different pH and temperatures under highly reduced conditions on aluminum corrosion. Besides, the experiments were performed where the part of the standard sample was exposed under strictly anaerobic conditions with an active microbiological process, and the second half was exposed under aerobic conditions. Thus the sample was exposed in gradient of oxidized-reduced conditions.

The ROI Proposal Preparation Guide is a tool to assist Hanford waste generators in preparing ROI proposal forms for submittal to Department of Energy, Richland Operations Office (DOE/RL) for funding. The guide describes the requirements for submitting an ROI proposal and provides examples of completed ROI forms. The intent is to assist waste generators in identifying projects that meet the criteria, provide information necessary to complete the ROI forms, and submit a proposal that is eligible to receive funding.