Experiments have been performed by LLL which indicate a definite density profile steepening. One possible mechanism for this effect is the ponderomotive force. LASNEX has been modified to include the light momentum deposition in the form rho dv/dt = -nabla P - nabla(radical epsilon + radical 1/epsilon) I/2c. Results will be presented from numerical simulations on spherical glass targets at laser intensities from 10/sup 14/ to 10/sup 16/ watts/cm/sup 2/. Emphasis is placed on the nature of the density profile near the critical region as a function of laser intensity and plasma conditions. The existence of this sharp step, whose scale length is of the order of a micrometer may imply a local reduction in the thermal conductivity.

Stacking, compression, and welding of the laminations for the TeV I Large Bore Quad results in a deformation due to springback which is unacceptable due to magnetic field requirements. ANSYS has been used to analyze a solution to this problem.

The velocity of water jet flow can be increased when the jet impacts a target material or another water jet. A theory describing such augmentation in terms of velocity, mass, and energy change is considered. The phenomena is sensitive to jet structure and the jet velocity profile. Jet velocity profiles do not remain constant over great distances from the nozzle, and ultimately disrupt into droplets. Within the droplet the profile is more regular and the velocity constant. The theory is extended to cover this case and experimental evidence of jet augmentation and its effects is presented.

Information is presented in tabular form on the contributions of the individual resonances to the resonance integrals in U and Th. The cases considered are for isolated cylindrical rods and involve U/sup 238/, U/sup 238/O/ sub 2/, Th/ sup 232/, and Th/sup 232/O/sub 2/ (M.C.G.)

The AGS Distributed Control System (AGSDCS) uses a relational database (Interbase) for the storage of all data on the host system network. This includes the static data which describes the components of the accelerator complex, as well as data for application program setup and data records that are used in analysis. By creating a mapping of each elation in the database to a C record and providing general tools for relation (record) across, all the data in the database is available in a natural fashion (in structures) to all the C programs on any of the nodes of the control system. In this paper the correspondence between the Interbase elations and the C structure is detailed with examples of C typedefs and relation definitions. It is also shown how the relations can be put into memory and linked (related) together when fast access is needed by programs. 1 ref., 2 tabs.

This progress report presents papers dealing with the distribution of dissolved and particulate carbon in the oceans as it relates to the global carbon cycle. Also presented are papers concerning global climate and its relationship with carbon dioxide levels in the atmosphere. Items within the scope of EDB are entered individually. (ACR)

A method of matching the beam from the 200 MeV linac to the AGS without the necessity of making emittance measurements is presented. An on-line computer program written on the PDP10 computer performs the matching by modifying independently the horizontal and vertical emittance. Experimental results show success with this method, which can be applied to any matching section.

A multicomponent dosimeter has been developed that uses an albedo detector to provide the measurement of low energy neutrons and as a screening element. It also contains track detector components, CR-39 and polycarbonate, which are only processed if the TLD indicates there has been an exposure to neutrons. Since the three components have significantly different energy responses, the dosimeter can act as a crude spectrometer. This report describes the dosimeter and briefly summarizes its use experience. 10 refs., 2 figs., 2 tabs.

A set of 16 tissue equivalent torso phantoms has been fabricated for use by major laboratories involved in counting transuranic nuclides in the lung. These phantoms, which have bone equivalent plastic rib cages, duplicate the performance of the DOE Realistic Phantom set. The new phantoms (and their successors) provide the user laboratories with a highly realistic calibration tool. Moreover, use of these phantoms will allow participating laboratories to intercompare calibration information, both on formal and informal bases. 3 refs., 2 figs.

Rate equations for the plasma species in a thermal barrier end plug establish an upper bound on the neutral pressure (P) external to the plasma. For the Tandem Mirror Experiment-Upgrade (TMX-U), this bound is P less than or equal to 0.5 - 1.0 x 10/sup -6/ Torr. Initially TMX-U did not satisfy this criterion, and axial end plugging of plasma losses seemed limited by the excessive pressure. Subsequently, we modified the machine to improve the vacuum conditions, decreasing P to the desired range. At the same time axial end plugging of plasma losses increased to the duration of neutral beam injection and ECRH heating. Here we summarize our experimental measurements of gas input.

The Folksam office building in Farsta, near Stockholm, has operated since December 1977 with an energy use for direct space heating of only 60 kWh/m/sup 2/ (19,000 Btu/ft/sup 2/), which is only half the Stockholm average for new buildings. To this 60 kWh/m/sup 2/ must be added the typical electric use of another 60 kWh/m/sup 2/ for lights, equipment, fans, etc. Even though Stockholm has 3580 deg-day (C), new Swedish buildings are so well insulated that their temperature floats upwards during most winter working days. In the Folksam building, this surplus heat from 40 full-occupied hours per week is stored in hollow-core concrete slabs, and then is used to compensate for the heat losses during the remaining 128 unoccupied hours. The energy transport/storage system necessary to keep the indoor temperature comfortable, summer and winter, is called Thermodeck, and is described in detail.

Anemometers were placed at four selected sites in North Georgia during the period July, 1980, to June, 1982. Regular wind speed readings were taken using accumulating recorders and average daily wind speeds calculated for each location. Three wind speed categories were determined: (a) average below 7 mph; (b) average between 7 and 25 mph; (c) average above 25 mph. One site was abandoned after seven months due to lack of expected wind; another site was closed after 4.5 months due to continuing excessive and damaging winds. Two sites were determined, after 12 to 20 months of data collecting respectively, to have sufficient wind resources in a usable time pattern to merit further investigation.

This paper describes a maintenance problem in a fusion power plant. The problem is to specify which life limited parts should be replaced when there is an opportunity. The objective is to minimize the cost rate of replacement parts and of maintenance actions while satisfying a power plant availability constraint. The maintenance policy is to look ahead and replace all parts that will reach their life limits within a time called a screen. Longer screens yield greater system availabilities because more parts are replaced prior to their life limits.

This alignment technique was developed while performing heterodyne velocimetry measurements at LLNL. There are a few minor items needed, such as a white card with aperture in center, visible alignment laser, IR back reflection meter, and a microscope to view the bridge surface. The work was performed on KCP flyers that were 6 and 8 mils wide. The probes used were Oz Optics manufactured with focal distances of 42mm and 26mm. Both probes provide a spot size of approximately 80?m at 1550nm. The 42mm probes were specified to provide an internal back reflection of -35 to -40dB, and the probe back reflections were measured to be -37dB and -33dB. The 26mm probes were specified as -30dB and both measured -30.5dB. The probe is initially aligned normal to the flyer/bridge surface. This provides a very high return signal, up to -2dB, due to the bridge reflectivity. A white card with a hole in the center as an aperture can be used to check the reflected beam position relative to the probe and launch beam, and the alignment laser spot centered on the bridge, see Figure 1 and Figure 2. The IR back reflection meter is used to measure the dB return …

We demonstrate propagation and small backscatter losses of a frequency-doubled (2{omega}) laser beam interacting with inertial confinement fusion hohlraum plasmas. The electron temperature of 3.3 keV, approximately a factor of two higher than achieved in previous experiments with open geometry targets, approaches plasma conditions of high-fusion yield hohlraums. In this new temperature regime, we measure 2{omega} laser beam transmission approaching 80% with simultaneous backscattering losses of less than 10%. These findings suggests that good laser coupling into fusion hohlraums using 2{omega} light is possible.

None

With the Nation's coal-burning utilities facing tighter controls on mercury pollutants, the U.S. Department of Energy is supporting projects that could offer power plant operators better ways to reduce these emissions at much lower costs. Sorbent injection technology represents one of the simplest and most mature approaches to controlling mercury emissions from coal-fired boilers. It involves injecting a solid material such as powdered activated carbon into the flue gas. The gas-phase mercury in the flue gas contacts the sorbent and attaches to its surface. The sorbent with the mercury attached is then collected by a particle control device along with the other solid material, primarily fly ash. We Energies has over 3,200 MW of coal-fired generating capacity and supports an integrated multi-emission control strategy for SO{sub 2}, NO{sub x} and mercury emissions while maintaining a varied fuel mix for electric supply. The primary goal of this project is to reduce mercury emissions from three 90 MW units that burn Powder River Basin coal at the We Energies Presque Isle Power Plant. Additional goals are to reduce nitrogen oxide (NO{sub x}), sulfur dioxide (SO{sub 2}), and particulate matter (PM) emissions, allow for reuse and sale of fly ash, demonstrate a reliable …

We report on the progress made by researchers of the CSCAPES Institute at Old Dominion University for the years 2007 and 2008 in the areas of research, software creation, education and training, and outreach activities.

This paper reports on experiments aimed at developing a new high-intensity H{sup -} ion source with long lifetime whose concept had recently been introduced. Starting from the motivation for this effort, several steps of the earlier development work are recapitulated, and the performance of the latest design variant is discussed in detail. The basic concept consists in coupling an ECR ion source to a standard SNS multi-cusp H{sup -} ion source that is driven by pulsed dc, rather than rf, power. As a key result, an electron beam of 1.5 A current has been extracted from the ECR discharge operating at 1.9 kW c. w. power, and a maximum discharge current of 17.5 A was achieved in the H{sup -} ion source. Production of H{sup -} ions, however could not yet been demonstrated in the one, preliminary, experiment conducted so far. The paper concludes by outlining further envisaged development steps for the plasma generator and an expansion towards a novel extraction system.

The purpose of this paper is to provide the Technical Basis and Documentation for Field Calibrations of radiation measurement equipment for use in the MARSSIM Seeping Surveys of the BC Controlled Area (BCCA). The Be Controlled Area is bounded on tt1e north by (but does not include) the BCCribs & Trenches and is bounded on the south by Army Loop Road. Parts of the BC Controlled Area are posted as a Contamination Area and the remainder is posted as a Soil Contamination Area. The area is approximately 13 square miles and divided into three zones (Zone A , Zone B. and Zone C). A map from reference 1 which shows the 3 zones is attached. The MARSSIM Scoping Surveys are intended 10 better identify the boundaries of the three zones based on the volumetric (pCi/g) contamination levels in the soil. The MARSSIM Field Calibration. reference 2. of radiation survey instrumentation will determine the Minimum Detectable Concentration (MDC) and an algorithm for converting counts to pCi/g. The instrumentation and corresponding results are not intended for occupational radiation protection decisions or for the release of property per DOE Order 5400.5.

The U.S. Department of Energy (DOE) Office of River Protection’s Waste Treatment and Immobilization Plant (WTP) will process and treat radioactive waste that is stored in tanks at the Hanford Site. Piping, pumps, and mixing vessels have been selected to transport, store, and mix the high-level waste slurries in the WTP. This report addresses the analyses performed by the Rheology Working Group (RWG) and Risk Assessment Working Group composed of Pacific Northwest National Laboratory (PNNL), Bechtel National Inc. (BNI), CH2M HILL, DOE Office of River Protection (ORP) and Yasuo Onishi Consulting, LLC staff on data obtained from documented Hanford waste analyses to determine a best-estimate of the rheology of the Hanford tank wastes and their settling behavior. The actual testing activities were performed and reported separately in referenced documentation. Because of this, many of the required topics below do not apply and are so noted.

The authors present calculations describing the production of photons through multi-step processes occurring when a beam of gamma rays interacts with a macroscopic material. These processes involve the creation of energetic electrons through Compton scattering, photo-absorption and pair production, the subsequent scattering of these electrons, and the creation of energetic photons occurring as these electrons are slowed through Bremsstrahlung emission. Unlike single Compton collisions, during which an energetic photon that is scattered through a large angle loses most of its energy, these multi-step processes result in a sizable flux of energetic photons traveling at large angles relative to an incident photon beam. These multi-step processes are also a key background in experiments that measure nuclear resonance fluorescence by shining photons on a thin foil and observing the spectrum of back-scattered photons. Effective cross sections describing the production of backscattered photons are presented in a tabular form that allows simple estimates of backgrounds expected in a variety of experiments. Incident photons with energies between 0.5 MeV and 8 MeV are considered. These calculations of effective cross sections may be useful for those designing NRF experiments or systems that detect specific isotopes in well-shielded environments through observation of resonance fluorescence.

The purpose of this paper is to provide the Technical Basis and Documentation for Field Calibrations of radiation measurement equipment for use in the MARSSIM Seeping Surveys of the BC Controlled Area (BCCA). The Be Controlled Area is bounded on tt1e north by (but does not include) the BCCribs & Trenches and is bounded on the south by Army Loop Road. Parts of the BC Controlled Area are posted as a Contamination Area and the remainder is posted as a Soil Contamination Area. The area is approximately 13 square miles and divided into three zones (Zone A , Zone B. and Zone C). A map from reference 1 which shows the 3 zones is attached. The MARSSIM Scoping Surveys are intended 10 better identify the boundaries of the three zones based on the volumetric (pCi/g) contamination levels in the soil. The MARSSIM Field Calibration. reference 2. of radiation survey instrumentation will determine the Minimum Detectable Concentration (MDC) and an algorithm for converting counts to pCi/g. The instrumentation and corresponding results are not intended for occupational radiation protection decisions or for the release of property per DOE Order 5400.5.

We reported previously that the homologous recombinational repair (HRR)-deficient Chinese hamster mutant cell line irs3 (deficient in the Rad51 paralog Rad51C) showed only a 50% spontaneous frequency of sister chromatid exchange (SCE) as compared to parental wild-type V79 cells. Furthermore, when irradiated with very low doses of alpha particles, SCEs were not induced in irs3 cells, as compared to a prominent bystander effect observed in V79 cells (Nagasawa et al., Radiat. Res. 164, 141-147, 2005). In the present study, we examined additional Chinese hamster cell lines deficient in the Rad51 paralogs Rad51C, Rad51D, Xrcc2, and Xrcc3 as well as another essential HRR protein, Brca2. Spontaneous SCE frequencies in non-irradiated wild-type cell lines CHO, AA8 and V79 were 0.33 SCE/chromosome, whereas two Rad51C-deficient cell lines showed only 0.16 SCE/chromosome. Spontaneous SCE frequencies in cell lines defective in Rad51D, Xrcc2, Xrcc3, and Brca2 ranged from 0.23-0.33 SCE/chromosome, 0-30% lower than wild-type cells. SCEs were induced significantly 20-50% above spontaneous levels in wild-type cells exposed to a mean dose of 1.3 mGy of alpha particles (<1% of nuclei traversed by an alpha particle). However, induction of SCEs above spontaneous levels was minimal or absent after {alpha}-particle irradiation in all of the HRR-deficient cell …