The overall objective of this project is the three phase development of an Early Entrance Coproduction Plant (EECP) which produces at least one product from at least two of the following three categories: (1) electric power (or heat), (2) fuels, and (3) chemicals. The objective is to have these products produced by technologies capable of using synthesis gas derived from coal and/or other carbonaceous feedstock. The objective of Phase I is to determine the feasibility and define the concept for the EECP located at a specific site and to develop a Research, Development, and Testing Plan (RD and T) for implementation in Phase II. The objective of Phase II is to implement the RD and T as outlined in the Phase I RD and T Plan to enhance the development and commercial acceptance of coproduction technology that produces high-value products, particularly those that are critical to our domestic fuel and power requirements. The project will resolve critical knowledge and technology gaps on the integration of gasification and downstream processing to coproduce some combination of power, fuels, and chemicals from coal and other feedstocks. The objective of Phase III is to develop an engineering design package and a financing plan for …

Congressional Research Service (CRS) report entailing the Constitutional difference between legislative prayer and school prayer. Topics include, descriptions of both types of prayer, their distinctions, and a conclusion on the matter.

The Supreme Court's decisions holding government-sponsored prayer in the public schools to violate the First Amendment's establishment clause but prayer in legislative assemblies to be constitutional are sometimes lifted up as contradictory. This report summarizes the relevant decisions and identifies the distinctions the Court has drawn between the two situations.

Report issued by the Argonne National Laboratory discussing progress made within the Reactor Development Program for September, 1966. The report includes highlights of the different project activities including plutonium utilization, fast breeder reactors, general reactor technology, advanced systems research, and nuclear safety. This report includes tables, illustrations, and photographs.

This report summarizes a comparative analysis of the impact of roof surface solar absorptance, attic, and duct insulation on simulated residential annual cooling and heating energy use in sixteen sunbelt climates. These locations cover a wide range of climates where cool roofs are expected to save energy and money, and are areas with high growth rates in new residential construction. The residences are single-story, single-family of new construction with either a gas furnace or an electric heat pump, and with ducts in the attic OT conditioned zone. The objective is to demonstrate that a residence with a cool roof could utilize a lower level of attic insulation than one with a dark roof with a zero net change in the annual energy bill. Annual energy use is simulated with DOE-2. lE, which was adapted with a validated residential duct-attic function, for dark and cool roofs and eleven attic insulation R-values ranging from 1 through 60. Analysis of the simulated energy savings from the light-colored roofs show that the savings can be transformed into an equivalent reduction in the level of attic insulation. Reductions in R-value are observed in varying degrees for residences with both gas and electric heat, all duct …

The most important factor in limiting the stability of dye-sensitized solar cells is the use of volatile liquid solvents in the electrolytes, which causes leakage during extended operation especially at elevated temperatures. This, together with the necessary complex sealing of the cells, seriously hampers the industrial-scale manufacturing and commercialization feasibilities of DSSCs. The objective of this program was to bring about a significant improvement in the performance and longevity of dye-based solar cells leading to commercialization. This had been studied in two ways first through development of low volatility solid, gel or liquid electrolytes, second through design and fabrication of TiO2 sculptured thin film electrodes.

None

The following topics were discussed in this report: pressurization of the rear face for existing reactors; loss of steam in existing reactors; in-pile boiling in the 105-KER recirculation facilities; feasibility report for special study reactor plant; shielding requirements of the special study reactor plant; sulfuric acid addition to 100-K; radiation from activated iron in a recirculating system; ion exchanger activity from Fe corrosion; thermal shock-KER loop; shielding of tube bundles; adjustment of raw water pH; and Zircaloy fuel element jackets.

It is proposed here to continue their program in the development of theories and models capable of describing the varied phenomena expected to influence the propagation of ultra-intense, ultra-short laser pulses with particular emphasis on guided propagation. This program builds upon expertise already developed over the years through collaborations with the NSF funded experimental effort lead by Professor Howard Milchberg here at Maryland, and in addition the research group at the Ecole Polytechnique in France. As in the past, close coupling between theory and experiment will continue. The main effort of the proposed research will center on the development of computational models and analytic theories of intense laser pulse propagation and guiding structures. In particular, they will use their simulation code WAKE to study propagation in plasma channels, in dielectric capillaries and in gases where self focusing is important. At present this code simulates the two-dimensional propagation (radial coordinate, axial coordinate and time) of short pulses in gas/plasma media. The plasma is treated either as an ensemble of particles which respond to the ponderomotive force of the laser and the self consistent electric and magnetic fields created in the wake of pulse or as a fluid. the plasma particle motion …

This report outlines the politics, economy, terrorism issues, and foreign relations of Morocco.

Report presenting an altitude-chamber investigation to determine the altitude performance characteristics of the British Rolls-Royce Nene II turbojet engine with an 18.41-inch-diameter jet nozzles. Testing occurred at a range of simulated altitudes and ram-pressure ratios. Results regarding the simulated flight performance, generalized performance, and effect of jet-nozzle area on performance are provided.

This report described the results of investigation on Task 10 of DOE/ASME Materials NGNP/Generation IV Project based on a contract between ASME Standards Technology, LLC (ASME ST-LLC) and Japan Atomic Energy Agency (JAEA). Task 10 is to Update and Improve Subsection NH -- Alternative Simplified Creep-Fatigue Design Methods. Five newly proposed promising creep-fatigue evaluation methods were investigated. Those are (1) modified ductility exhaustion method, (2) strain range separation method, (3) approach for pressure vessel application, (4) hybrid method of time fraction and ductility exhaustion, and (5) simplified model test approach. The outlines of those methods are presented first, and predictability of experimental results of these methods is demonstrated using the creep-fatigue data collected in previous Tasks 3 and 5. All the methods (except the simplified model test approach which is not ready for application) predicted experimental results fairly accurately. On the other hand, predicted creep-fatigue life in long-term regions showed considerable differences among the methodologies. These differences come from the concepts each method is based on. All the new methods investigated in this report have advantages over the currently employed time fraction rule and offer technical insights that should be thought much of in the improvement of creep-fatigue evaluation procedures. …

A program has been coded for the ORACLE which will solve, using Monte Carlo technique, the transport problem for monodirectional, monoenergetic gamma radiation incident at an angle Θ, upon an infinite laminated slab of finite thickness. Each of the laminations (or regions) is itself an infinite, homogeneous slab of finite thickness. The code is designed to give estimates of energy deposition, energy flux, tissue dose rate, reflected and transmitted energy current, and the angular and energy distribution of the reflected and transmitted energy current. All the answers except for energy deposition and reflected and transmitted energy current are optional.

This document specifies the critical characteristics for containers procured for Plutonium Finishing Plant's (PFP's) Vault Operations system as required by HNF-PRO-268 and HNF-PRO-1819. These are the minimum specifications that the equipment must meet in order to perform its safety function.

This report details the chemical and radionuclide contaminant results for the characterization of the 2012 Third Quarter sampling of Tank 50 for the Saltstone Waste Acceptance Criteria (WAC). Information from this characterization will be used by Waste Solidification Engineering (WSE) to support the transfer of low-level aqueous waste from Tank 50 to the Salt Feed Tank in the Saltstone Facility in Z-Area, where the waste will be immobilized. This information is also used to update the Tank 50 Waste Characterization System.

Only two intrinsic approaches to increasing the density of energy stored in capacitors are known: (1) Increase the Dielectric Constant while maintaining the breakdown filed; and (2) Increase the breakdown field for a given dielectric constant material. The maximum energy density, E{sub 0} (Joules/cm{sup 3}) that can be stored in the dielectric of a capacitor is given by: E{sub 0} = 1/2 k {var_epsilon}{sub 0} V{sub b}{sup 2} (Joules/cm{sup 3} dielectric). Where k is the relative permittivity (dielectric constant), {var_epsilon}{sub 0} is the permittivity of free space (8.894 x 10{sup -14} F/cm) and V{sub b} the dielectric material breakdown field. In this project we have successfully developed capacitor structures using dielectric materials with 3 < k < 50 that exhibit high breakdown fields. The observed performance of these capacitors as characterized by the energy stored per unit volume of dielectric at V{sub b} are compared on the basis of the breakdown field in Figure 1.

Many particle accelerator applications can benefit from online pulse-by-pulse nonintercepting emittance measurement system. Recently, there has been much interest in performing such a measurement with a set of resonant quadrupole-mode cavities. This article explores a geometry to achieve an enhanced shunt impedance in such a cavity by adding a set of posts forming capacitive gaps near the beam pipe outer radius. For typical diagnostic cavity applications, a five-fold increase in shunt impedance can be obtained with this method. The effect of errors in cavity fabrication on the required mode structure are explored.

This manual covers what the beginner needs to know in order to transfer files between an Apple's Microcomputer and a Wang's OIS Word Processor. We have also tried to indicate where the experienced user might want to look for additional details. We cover the use of Apple Writer )(, VisiTerm, VisiCalc, and EasyWriter Professional. For us, the two most useful connections are from Applewriter to Wang and from Visicalc to Wang. From Wang to Apple Writer via Visiterm may have some value. Files can be transferred by VisiTerm to Wang, but they arrive with RETURNS in the middle of words, which have to be edited out, so we do not recommend it. We describe how to go from EasyWriter to Wang, but we do not know how to go from Wang to EasyWriter. We see no reason to go from Wang to VisiCalc, so we haven't thought about it. All instructions are given for a typical configuration of the Apple, namely the one on which this manual was composed. It is detailed in the section on Hardware and Software.

Technical report. From Abstract : "The scandium-yttrium and scandium-zirconium were studied by thermal and x-ray methods. Both systems are characterized by complete solid solubility in the low temperature hexagonal form and in the high temperature bcc form. In the Sc-Y system, there is a minimum in the solidus at 50 at. pct and 1365°C, while the solidus in the Sc-Zr system follows a nearly straight line relationship between the melting point of scandium and zirconium. There is a minimum in the temperature of transition from hexagonal to bcc in the Sc-Y system at 43 at. pct Y and 1175°C; while the temperature of transition is raised in the Sc-Zr system to a maximum of 1415°C at 30 at. pct Zr."

This document details the analytical sample results for two auger samples of the tip 15 cm (6 in.) of tank 241-BY-104 salt cake. The thermal response of tank 241-BY-104 auger samples is generally mild. The level of cyanide and iron, and therefore of ferrocyanide is very low. Evidence of inhomogeneity is present for tank 241-By-104 salt cake. Mass and charge balances were less than ideal. The concentrations found for the major constituents, except chromium, are in line with the expectations.

Reported herein are results from the Eril Research, Inc.(ERI) participationin the NASA Johnson Space Center sponsored studycharacterizing the radiation shielding properties of the two types ofspace suit that astronauts are wearing during the EVA on-orbit assemblyof the International Space Station (ISS). Measurements using passivedetectors were carried out to assess the shielding properties of the USEMU Suit and the Russian Orlan-M suit during irradiations of the suitsand a tissue equivalent phantom to monoenergetic proton and electronbeams at the Loma Linda University Medical Center (LLUMC). Duringirradiations of 6 MeV electrons and 60 MeV protons, absorbed dose as afunction of depth was measured using TLDs exposed behind swatches of thetwo suit materials and inside the two EVA helmets. Considerable reductionin electron dosewas measured behind all suit materials in exposures to 6MeV electrons. Slowing of the proton beam in the suit materials led to anincrease in dose measured in exposures to 60 MeV protons. During 232 MeVproton irradiations, measurements were made with TLDs and CR-39 PNTDs atfive organ locations inside a tissue equivalent phantom, exposed bothwith and without the two EVA suits. The EVA helmets produce a 13 to 27percent reduction in total dose and a 0 to 25 percent reduction in doseequivalent when …

A low energy neutrino factory (LENF) is defined, for the purpose of this report, to accelerate a muon beam to a total energy in the range of 10-14 GeV, and store it in a decay ring directing a resulting neutrino beam to a detector 2200-2300 km distant. The machine should be ultimately capable of producing 10{sup 21} decays toward that detector per year of 10{sup 7} s. We consider such a neutrino factory to be the accelerator defined in the Interim Design Report (IDR) of the International Design Study for the Neutrino Factory (IDS-NF), modified to remove the final stage of acceleration, possibly modifying the remaining acceleration stages to adjust the final energy, and replacing the decay ring with one designed for the lower energy and shorter baseline. We discuss modifications to that design which would reduce the cost of the machine at the price of a reduction in neutrino production, down to as low as 10{sup 20} decays per year. These modifications will not preclude eventually upgrading the machine to the full production of 10{sup 21} decays per year. The eventual cost of a machine which achieves the full production through a series of lower-production stages should not exceed …

This report gives an overview of tax reform issues. The President and leading members of Congress have stated that fundamental tax reform is a major policy objective for the 112th Congress. Some Members have said that fundamental tax reform is needed in order to raise a large amount of additional revenue, which is necessary to reduce high forecast budget deficits and the sharply rising national debt. Congressional interest has been expressed in both a major overhaul of the U.S. tax system and the feasibility of levying a consumption tax.

Taking a bottom-up approach, this report examines seven primary drivers of wind turbine prices in the United States, with the goal of estimating the degree to which each contributed to the doubling in turbine prices from 2002 through 2008, as well as the subsequent decline in prices through 2010 (our analysis does not extend into 2011 because several of these drivers are best gauged on a full-year basis due to seasonality issues). The first four of these drivers can be considered, at least to some degree, endogenous influences – i.e., those that are largely within the control of the wind industry – and include changes in: 1) Labor costs, which have historically risen during times of tight turbine supply; 2) Warranty provisions, which reflect technology performance and reliability, and are most often capitalized in turbine prices; 3) Turbine manufacturer profitability, which can impact turbine prices independently of costs; and 4) Turbine design, which for the purpose of this analysis is principally manifested through increased turbine size. The other three drivers analyzed in this study can be considered exogenous influences, in that they can impact wind turbine costs but fall mostly outside of the direct control of the wind industry. These …