We predict theoretically and demonstrate experimentally the spontaneous formation of a superlattice during crystal growth. When a strained alloy grows by "step flow", the steps at the surface form periodic bunches. The resulting modulated strain biases the incorporation of the respective alloy components at different steps in the bunch, leading to the formation of a superlattice. X-ray diffraction and electron microscopy for SiGe grown on Si give clear evidence for such spontaneous superlattice formation.

The performance of a polymer electrolyte fuel cell (PEFC) system that is fueled directly by hydrogen has been evaluated for transportation vehicles. The performance was simulated using a systems analysis code and a vehicle analysis code. The results indicate that, at the design point for a 50-kW PEFC system, the system efficiency is above 50%. The efficiency improves at partial load and approaches 60% at 40% load, as the fuel cell operating point moves to lower current densities on the voltage-current characteristic curve. At much lower loads, the system efficiency drops because of the deterioration in the performance of the compressor, expander, and, eventually, the fuel cell. The results also indicate that the PEFC system can start rapidly from ambient temperatures. Depending on the specific weight of the fuel cell (1.6 kg/kW in this case), the system takes up to 180s to reach its design operating conditions. The PEFC system has been evaluated for three mid-size vehicles: the 1995 Chrysler Sedan, the near-term Ford AIV (Aluminum Intensive Vehicle) Sable, and the future P2000 vehicle. The results show that the PEFC system can meet the demands of the Federal Urban Driving Schedule and the Highway driving cycles, for both warm and …

We demonstrate unipolar complementary circuits consisting of a pair of resonant tunneling transistors based on the gate control of 2D-2D interlayer tunneling, where a single transistor - in addition to exhibiting a welldefined negative-differential-resistance can be operated with either positive or negative transconductance. Details of the device operation are analyzed in terms of the quantum capacitance effect and band-bending in a double quantum well structure, and show good agreement with experiment. Application of resonant tunneling complementary logic is discussed by demonstrating complementary static random access memory using two devices connected in series.

The REBUS-3 burnup code, used in the ANL RERTR Program, is a very general code that uses diffusion theory (DIF3D) to obtain the fluxes required for reactor burnup analyses. Diffusion theory works well for most reactors. However, to include the effects of exact geometry and strong absorbers that are difficult to model using diffusion theory, a Monte Carlo method is required. MCNP, a general-purpose, generalized-geometry, time-dependent, Monte Carlo transport code, is the most widely used Monte Carlo code. This paper presents a linking of the MCNP code and the REBUS burnup code to perform these difficult burnup analyses. The linked code will permit the use of the full capabilities of REBUS which include non-equilibrium and equilibrium burnup analyses. Results of burnup analyses using this new linked code are also presented.

There are three major areas in which economics can contribute to the evaluation of federal R and D: assessment of net benefits, ex ante expected as well as ex post realized; tailoring of R and D portfolios to policy goals; and guiding the contractual organization of R and D production. Additionally, evaluation of R and D and scientific activity tend to be distinctly retrospective, principally because of the long lags between the initial production activity and the observability of consequences. Extending the purview of economic evaluation of R and D, they find ample opportunity for evaluation that can inform current R and D management practice. The conduct of R and D is organized through a series of explicit and implicit contracts designed to elicit long-term commitments by some agents while attempting to limit the commitment by others. It is natural to consider the efficiency with which R and D is conducted as a subject for economic inquiry, although in practice such inquiries generally are restricted to accounting exercises. In evaluating the efficiency with which R and D is done, the current ordinary practice is to look at labor rates and equipment and materials prices while considering quantities of those items …

The Hazards Mitigation Center at Lawrence Livermore National Laboratory (LLNL) updated the seismic hazard and design parameters at the Pantex Plant. The probabilistic seismic hazard (PSH) estimates were first updated using the latest available data and knowledge from LLNL (1993, 1998), Frankel et al. (1996), and other relevant recent studies from several consulting companies. Special attention was given to account for the local seismicity and for the system of potentially active faults associated with the Amarillo-Wichita uplift. Aleatory (random) uncertainty was estimated from the available data and the epistemic (knowledge) uncertainty was taken from results of similar studies. Special attention was given to soil amplification factors for the site. Horizontal Peak Ground Acceleration (PGA) and 5% damped uniform hazard spectra were calculated for six return periods (100 yr., 500 yr., 1000 yr., 2000 yr., 10,000 yr., and 100,000 yr.). The design parameters were calculated following DOE standards (DOE-STD-1022 to 1024). Response spectra for design or evaluation of Performance Category 1 through 4 structures, systems, and components are presented.