The growth of Cu Layers deposited on Ru(0001) substrates at temperatures between 500 K and 850 K was studied using surface x-ray diffraction. Results are consistent with a Stransky-Krastanov growth mode with a two layer critical thickness.

The U.S. Department of Energy (DOE) launched the Contract Reform Initiative in 1994 in order to improve the effectiveness and effkiency of managing major projects and programs. The intent of this initiative is to help DOE harness both technical and market forces to reduce the overall cost of accomplishing DOE's program goals. The new approach transfers greater risk to private contractors in order to develop incentives that align contractor performance with DOE's objectives. In some cases, this goal can be achieved through public-private partnerships wherein the govermhent and the contractor share risks associated with a project in a way that optimizes its economics. Generally, this requires that project risks are allocated to the party best equipped to manage and/or underwrite them. While the merits of privatization are well documented, the question of how privatized services should be financed is often debated. Given the cost of private sector equity and debt, it is difficult to ignore the lure of the government's "risk free" cost of capital. However, the source of financing for a project is an integral part of its overall risk allocation, and therefore, participation by the government as a financing source could alter the allocation of risks in the …

Grain growth experiments and simulations exhibit self-similar grain size distributions quite different from that derived via a mean field approach by Hillert [ 1]. To test whether this discrepancy is due to insufficient anneal times, two different two-dimensional grain structures with realistic topologies and Hillert grain size distributions are generated and subjected to grain growth via the Monte Carlo Potts Model (MCPM). In both cases, the observed self-similar grain size distributions deviate from the initial Hillert form and conform instead to that observed in MCPM grain growth simulations that start from a random microstructure. This suggests that the Hillert grain size distribution is not an attractor.

Uranium alloys are candidates for the fuel phase in aluminum matrix dispersion fuels requiring high uranium loading. Certain uranium alloys have been shown to have good irradiation performance at intermediate burnup. Previous studies have shown that acceptable fission gas swelling behavior and fuel-aluminum interaction is possible only if the fuel alloy can be maintained in the high temperature body-centered-cubic {gamma}-phase during fabrication and irradiation, i.e., at temperatures at which {alpha}-U is the equilibrium phase. Transition metals in Groups V through VIII are known to allow metastable retention of the gamma phase below the equilibrium isotherm. These metals have varying degrees of effectiveness in stabilizing the gamma phase. Certain alloys are metastable for very long times at the relatively low fuel temperatures seen in research reactor operation. In this paper, the existing data on the gamma stability of binary and ternary uranium alloys is analyzed. The mechanism and kinetics of decomposition of the gamma phase are assessed with the help of metal alloy theory. Alloys with the highest possible uranium content, good gamma-phase stability, and good neutronic performance are identified for further metallurgical studies and irradiation tests. Results from theory will be compared with experimentally generated data.

This paper describes the progress achieved by the Reduced Enrichment for Research and Test Reactors (RERTR) Program in collaboration with its many international partners since its inception in 1978. A brief summary of the results that the program had attained by the end of 1997 is followed by a detailed review of the major events, findings, and activities that took place in 1998. The past year was characterized by exceptionally important accomplishments and events for the RERTR program. Four additional shipments of spent fuel from foreign research reactors were accepted by the U.S. Altogether, 2,231 spent fuel assemblies from foreign research reactors have been received by the U.S. under the acceptance policy. Fuel development activities began to yield solid results. Irradiations of the first two batches of microplates were completed. Preliminary postirradiation examinations of these microplates indicate excellent irradiation behavior of some of the fuel materials that were tested. These materials hold the promise of achieving the pro am goal of developing LEU research reactor fuels with uranium density in the 8-9 g /cm{sup 3} range. Progress was made in the Russian RERTR program, which aims to develop and demonstrate the technical means needed to convert Russian-supplied research reactors to …

Treatment of [Fe(OEP)]20 with trichloroacetic acid results in ruffled formation of (octaethylporphinato trichloroacetato)iron(HI). Various crystalline solvates can be isolated, depending on the crystallization solvent. Initial crystallization with CHC13/hexanes resulted in the isolation of an unsolvated form. [Fe(OEP)(02C2C13 )]. This form contains distinct porphyrin core conformations at the same site: one is domed and the other is ruffled. Crystal data for [Fe(OEP)(02C2C13 )]: Q = 14.734(4) .4. b = 13.674(1) .\. c = 17..541 [,.5] .~. 3 = 90.67(1)0, V = 35-!5.8(14) .\3. monoclinic. space group R1/ n. Z = 4. Subsequent crystallization with CHC13/hexanes resulted in a new crystalline form, [Fe(OEP)(OzC2C13 )~.- CHC13; the porphyrin core is slightly ruffled. Crystal data for [Fe(OEP)(OoC2C13 )]. CHC13: a =12.323(1) .~, 6 = 13.062(3) .\. C = 14.327(2) .$, Q = 89.32(1)", .3 = 113.36(2)0. :~ = 105.26(1)'. V = `2031.3(6) .\3. triclinic. space group Pi. Z = 2. Crystallization with CH2C12/hexanes resulted in the isolation of yet another form, [Fe(OEP) (02 C2C13)]. H02C2C13. which contains two independent molecules in the unit cell: molecule is slightly saddled and molecule B is modestly ruffled. Crystal data for [Fe(OEP)(02ClC13 )]. H02C2C13: a = 13.148(3) .\, b = 13.45.5(3) A, c = Q3.761(5) -& ~ = …

This work is intended to contribute to the foundations for formalizing industrial ecology analyses of energy systems (systems for energy generation, transfer. or transformation) and to examine how the tools for performing these analyses can also enhance the field of industrial ecology in other applications. We discuss requirements for studying materials and energy , cycling in industrial processes. with particular emphasis on energy generating systems, through explicit inclusion of entropy concepts in industrial ecology considerations. This perspective is intended to contribute to the theoretical basis for industrial ecology, to the development of tools for comparing the ecological (human and environmental health. and institutional) impacts of energy generating and other industrial processes, and to possible changes in engineering curricula with emphasis on design.

The Basis for Interim Operation (BIO) document for K Reactor in Cold Standby and the L- and P-Reactor Disassembly Basins was prepared in accordance with the draft DOE standard for BIO preparation (dated October 26, 1993).

The safety analysis of the FB-Line Facility indicates that the operation of FB-Line to support the current mission does not present undue risk to the facility and co-located workers, general public, or the environment.

Laser-plasma instability is a serious concern for indirect-drive inertial confinement fusion (ICF), where laser beams illuminate the interior of a cavity (called a hohlraum) to produce X-rays to drive the implosion of a fusion capsule. Stimulated Raman and Brillouin backscattering (SRS and SBS) could result in unacceptably high laser reflectivities. Unfortunately, it is impossible at present to fully simulate these processes realistically. The authors experimental program aims to understand these instabilities by pursuing a dual strategy. (1) They use a gas-filled hohlraum design, which best approaches ignition-hohlraum conditions, on the Nova laser to identify important non linear trends. (2) They are shifting towards more fundamental experiments with a nearly diffraction-limited interaction laser beam illuminating extremely well characterized plasmas on the Trident laser facility at Los Alamos to probe the relevant fundamental processes.

For some time 2-dimensional RMHD (radiation magneto-hydrodynamic) calculations of radiating z-pinches have been made to agree with integral data (current wave form, yield and power). For these calculations, the agreement with detailed data, such as time-resolved x-ray images, is generally not as good. Correctly modeling the physics of z-pinches, including detailed data, is needed to have true predictive capability. To address this problem, the authors first determine which integral data are most sensitive to the details in the models. With this information, they investigate aspects of the pinch, to which the data is sensitive, using non-standard techniques. For example, the pinch is calculated in (x,y)-geometry to investigate how a non-symmetric implosion affects the simulated data.

Recently Lee and Preston have proposed to use magnetic implosions as a new method for measuring material strength in a regime of large strains and high strain rates inaccessible to previously established techniques. By its shockless nature, this method avoids the intrinsic difficulties associated with an earlier approach using high explosives. The authors illustrate how the stress-strain relation for an imploding liner can be obtained by measuring the velocity and temperature history of its inner surface. They discuss the physical requirements that lead us to a composite liner design applicable to different test materials, and also compare the code-simulated prediction with the measured data for the high strain-rate experiments conducted recently at LANL. Finally, they present a novel diagnostic scheme that will enable us to remove the background in the pyrometric measurement through data reduction.

Particle accelerators for protons, electrons, and other ion species often use high-power vacuum tubes for RF amplification, due to the high RF power requirements to accelerate these particles with high beam currents. The final power amplifier stages driving large accelerators are unable to be converted to solid-state devices with the present technology. In some instances, radiation levels preclude the use of transistors near beamlines. Work is being done worldwide to replace the RF power stages under about ten kilowatts CW with transistor amplifiers, due to the lower maintenance costs and obsolescence of power tubes in these ranges. This is especially practical where the stages drive fifty Ohm impedance and are not located in high radiation zones. The authors are doing this at the Los Alamos Neutron Science Center (LANSCE) proton linear accelerator (linac) in New Mexico. They replaced a physically-large air-cooled UHF power amplifier using a tetrode electron tube with a compact water-cooled unit based on modular amplifier pallets developed at LANSCE. Each module uses eight push-pull bipolar power transistor pairs operated in class AB. Four pallets can easily provide up to 2,800 watts of continuous RF at 805 MHz. A radial splitter and combiner parallels the modules. This amplifier …

None

New York City Department of Sanitation has operated natural gas fueled refuse haulers in a pilot study: a major goal of this study was to compare the emissions from these natural gas vehicles with their diesel counterparts. The vehicles were tandem axle trucks with GVW (gross vehicle weight) rating of 69,897 pounds. The primary use of these was for street collection and transporting the refuse to a landfill. West Virginia University Transportable Heavy Duty Emissions Testing Laboratories have been engaged in monitoring the tailpipe emissions from these trucks for seven-years. In the later years of testing the hydrocarbons were speciated for non-methane and methane components. Six of these vehicles employed the older technology (mechanical mixer) Cummins L-10 lean burn natural gas engines. Five trucks were equipped with electronically controlled Detroit Diesel Series 50 lean burn engines, while another five were powered by Caterpillar stoichiometric burn 3306 natural gas engines, The Ca terpillar engines employed an exhaust oxygen sensor feedback and three way catalysts. Since the refuse haulers had automatic Allison transmissions, and since they were employed in stop-and-go city service, initial emissions measurements were made using the Central Business Cycle (SAE Jl376) for buses at 42,000 pound test weight. Some …

The Fischer-Tropsch (F-T) catalytic conversion process can be used to synthesize diesel fuels from a variety of feedstocks, including coal, natural gas and biomass. Synthetic diesel fuels can have very low sulfur and aromatic content, and excellent autoignition characteristics. Moreover, Fischer-Tropsch diesel fuels may also be economically competitive with California B- diesel fuel if produced in large volumes. overview of Fischer-Tropsch diesel fuel production and engine emissions testing is presented. Previous engine laboratory tests indicate that F-T diesel is a promising alternative fuel because it can be used in unmodified diesel engines, and substantial exhaust emissions reductions can be realized. The authors have performed preliminary tests to assess the real-world performance of F-T diesel fuels in heavy-duty trucks. Seven White-GMC Class 8 trucks equipped with Caterpillar 10.3 liter engines were tested using F-T diesel fuel. Vehicle emissions tests were performed using West Virginia University's unique transportable chassis dynamometer. The trucks were found to perform adequately on neat F-T diesel fuel. Compared to a California diesel fuel baseline, neat F-T diesel fuel emitted about 12% lower oxides of nitrogen (NOx) and 24% lower particulate matter over a five-mile driving cycle.

Simple transport-based scaling laws are derived to show that a density and time regime intermediate between conventional magnetic confinement and conventional inertial confinement offers attractive reductions in system size and energy when compared to magnetic confinement and attractive reductions in heating power and intensity when compared to inertial confinement. This intermediate parameter space appears to be readily accessible by existing and near term pulsed power technologies. Hence, the technology of the Megagauss conference opens up an attractive path to controlled thermonuclear fusion.

The successful 2-D simulations of z-pinch experiments (reproducing such features as the measured experimental current drive, radiation pulse shape, peak power and total radiated energy) can lead to a better understanding of the underlying physics in z-pinch implosions and to the opportunity to use such simulations in the analysis of experimental data and in the design of new experiments. Such use has been made with LANL simulations of experiments on the Sandia Saturn and Z accelerators. Applications have included ''vacuum'' and ''dynamic'' hohlraum experiments; variations in mass, radius and length; and ''nested'' array configurations. Notable examples include the explanation of the power/length results in reduced length pinches and the prediction of the current best power and pulsewidth nested array experiment. Examples of circumstances where the simulation results do not match the experiments will be given along with a discussion of opportunities for improved simulation results.

The Remote Low Light Imaging (RULLI) system responds to individual photons using a modification to conventional image intensifier technology and fast timing electronics. Each photon received at the detector is resolved in three dimensions (X, Y, and time). The accumulation of photons over time allows the system to image with very low light levels, such as starlight illumination. Using a low power pulsed laser and very fine time discrimination, three dimensional imaging has been accomplished with a vertical resolution of five cm.

This study is principally concerned with characterizing the organic part of coal combustion fly ashes. High carbon fly ashes are becoming more common as by-products of low-NOx combustion technology, and there is need to learn more about this fraction of the fly ash. The project team consists of two universities, Brown and Princeton, and an electrical utility, New England Power. A sample suite of over fifty fly ashes has been gathered from utilities across the United States, and includes ashes from a coals ranging in rank from bituminous to lignite. The characterizations of these ashes include standard tests (LOI, Foam Index), as well as more detailed characterizations of their surface areas, porosity, extractability and adsorption behavior. The ultimate goal is, by better characterizing the material, to enable broadening the range of applications for coal fly ash re-use beyond the current main market as a pozzolanic agent for concretes. The potential for high carbon-content fly ashes to substitute for activated carbons is receiving particular attention. The work performed to date has already revealed how very different the surfaces of different ashes produced by the same utility can be, with respect to polarity of the residual carbon. This can help explain the …

Achieving parallelism in simulations that use Monte Carlo transport methods presents interesting challenges. For problems that require domain decomposition, load balance can be harder to achieve. The Monte Carlo transport package may have to operate with other packages that have different optimal domain decompositions for a given problem. To examine some of these issues, we have developed a code that simulates the interaction of a laser with biological tissue; it uses a Monte Carlo method to simulate the laser and a finite element model to simulate the conduction of the temperature field in the tissue. We will present speedup and load balance results obtained for a suite of problems decomposed using a few domain decomposition algorithms we have developed.

Dodecaphenylporphyrins with varying degrees of fluorination of the peripheral phenyl rings (FXDPPS) were synthesized as model compounds for studying electronic effects in nonplan~ porphyrins, and detailed electrochemical studies of the chloroiron(HI) complexes of these compounds were undertaken. The series of porphyrins, represented as FeDPPCl and as FeFXDPPCl where x = 4, 8 (two isomers), 12, 20,28 or 36, could be reversibly oxidized by two electrons in dichloromethane to give n-cation radicals and n-dications. All of the compounds investigated could also be reduced by three electrons in benzonitrile or pyridine. In benzonitrile, three reversible reductions were observed for the unfluorinated compound FeDPPC1, whereas the FeFXDPPCl complexes generally exhibited irreversible first and second reductions which were coupled to chemical reactions. The chemical reaction associated with the first reduction involved a loss of the chloride ion after generation of Fe FXDPPC1. The second chemical reaction involved a novel intramolecular electron transfer between the initially generated Fe(H) porphyrin n-anion radical and the final Fe(I) porphyrin reduction product. In pyridine, three reversible one electron reductions were observed with the second reduction affording stable Fe(II) porphyrin o - anion radicals for ail of the complexes investigated.

The WWR-SM research reactor in Uzbekistan has operated at 10 MW since 1979, using Russian-supplied IRT-3M fuel assemblies containing 90% enriched uranium. Burnup tests of three full-sized IRT-3M FA with 36% enrichment were successfully completed to a burn up of about {approximately}50% in 1987-1989. In August 1998, four IRT-3M FA with 36% enriched uranium were loaded into the core to initiate conversion of the entire core to 36% enriched fuel. This paper presents the results of equilibrium fuel cycle comparisons of the reactor using HEU (90%) and HEU (36%) IRT-3M fuel and compares results with the performance of IRT-4M FA containing LEU (19.75%). The results show that an LEU (19.75%) density of 3.8 g/cm{sup 3} is required to match the cycle length of the HEU (90%) core and an LEU density 3.9 g/cm{sup 3} is needed to match the cycle length of the HEU (36%) core.

Treated water from the 200 Area Effluent Treatment Facility (ETF) is discharged to a disposal site in accordance with the State Waste Discharge Permit ST-4500. This disposal site is referred to as the State-Approved Land Disposal Site (SALDS). In accordance with the discharge permit, the groundwater at the SALDS is routinely sampled. The results of the groundwater sampling are reported in quarterly discharge monitoring reports. In 1997, the USDOE also committed to the issuance of an annual summary report of groundwater monitoring results and evaluation with updates to the groundwater monitoring plan as appropriate. This report summarizes the groundwater information for FY 1998.