Control of criticality in spent nuclear fuel is necessary during all phases of fuel management during storage, transportation, and permanent disposal. Work completed to date is described. Tasks in the original proposal include: seek coverage by an approved quality control program, review documents related to criticality, attend criticality meetings and workshops, and maintain an expertise in criticality. Current work is covered by Univ. of Nevada QA plan, however, coverage under a more thorough plan will be sought in order that the results can be used during NRC licensing.

The Electric Power Monthly (EPM) presents monthly electricity statistics for a wide audience including Congress, Federal and State agencies, the electric utility industry, and the general public. The purpose of this publication is to provide energy decisionmakers with accurate and timely information that may be used in forming various perspectives on electric issues that lie ahead. The Coal and Electric Data and Renewables Division; Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), Department of Energy prepares the EPM. This publication provides monthly statistics at the State, Census division, and US levels for net generation, fossil fuel consumption and stocks, quantity and quality of fossil fuels, cost of fossil fuels, electricity sales, revenue, and average revenue per kilowatthour of electricity sold. Data on net generation, fuel consumption, fuel stocks, quantity and cost of fossil fuels are also displayed for the North American Electric Reliability Council (NERC) regions. The EIA publishes statistics in the EPM on net generation by energy source; consumption, stocks, quantity, quality, and cost of fossil fuels; and capability of new generating units by company and plant.

The United States and Japan are closely tied economically. Japan ranks second only to Canada as the largest U.S. export market. Japan is the leading market for American agricultural exports, such as corn and meat; for U.S. crude materials such as wood; and for U.S.-produced aircraft. Japan is also the second largest supplier of U.S. imports. These include cars, consumer electronics, telecommunications equipment, and computers. The United States ranks as Japan's number one export market and import supplier.

On Oct. 7, 1992, Hong Kong's new Governor Christopher Patten's unveiled proposals to expand the voting franchise in Hong Kong and broaden the scope of democratic institutions. Patten's proposals reflected a growing desire on the part of the colonial government and the people of Hong Kong that, in the aftermath of the 1989 Tiananmen crackdown, Hong Kong should erect safeguards against capricious Chinese government action after 1997. The proposals were seen by the British authorities as consistent with the 1984 Sino-British Joint Declaration -- the agreement governing Hong Kong's transfer to Chinese rule, but Beijing disagreed.

The W-259 project will provide upgrades to the 2706-T/TA Facility to comply with Federal and State of Washington environmental regulations for secondary containment and leak detection. The project provides decontamination activities supporting the environmental restoration mission and waste management operations on the Hanford Site.

A 3D remote metrology system (RMS) is needed to map the interior plasma-facing components of the International Thermonuclear Experimental Reactor (ITER). The performance and survival of these components within the reactor vessel are strongly dependent on their precise alignment and positioning with respect to the plasma edge. Without proper positioning and alignment, plasma-facing surfaces will erode rapidly. A RMS design involving Coleman Research Corporation (CRC) fiber optic coherent laser radar (CLR) technology is examined in this study. The fiber optic CLR approach was selected because its high precision should be able to meet the ITER 0.1 mm accuracy requirement and because the CLR`s fiber optic implementation allows a 3D scanner to operate remotely from the RMS system`s vulnerable components. This design study has largely verified that a fiber optic CLR based RMS can survive the ITER environment and map the ITER interior at the required accuracy at a one measurement/cm{sup 2} density with a total measurement time of less than one hour from each of six or more vertically deployed measurement probes. The design approach employs a sealed and pressurized measurement probe which is attached with an umbilical spiral bellows conduit. This conduit bears fiber optic and electronic links plus …

This supporting document provides the hazards categorization for the K Basin Water Filtration Upgrade Project at K East. All activities associated with the project are less than Hazard Category 3, except for the handling of the ECO-ROK liners containing spent filter cartridges. All activities involving the handling of liners, containing spent cartridges, by monorail, forklift or mobile crane are classified as Hazard Category 3.

The commissioning of the 7-GeV Advanced Photon Source (APS) storage ring began in early 1995. Characterization of the stored particle beam properties involved time-resolved transverse and longitudinal profile measurements using optical synchrotron radiation (OSR) monitors. Early results include the observation of the beam on a single turn, measurements of the transverse beam sizes after damping using a 100 {mu}s integration time ({sigma}{sub x} {approximately} 150 {plus_minus} 25 {mu}m, {sigma}{sub {gamma}} {approximately} 65 {plus_minus} 25 {mu}m, depending on vertical coupling), and measurement of the bunch length ({sigma}{sub {tau}} {approximately} 25 to 55 ps, depending on the charge per bunch). The results are consistent with specifications and predictions based on the 8.2 nm-rad natural emittance, the calculated lattice parameters, and vertical coupling less than 10%. The novel, single-element focusing mirror for the photon transport line and the dual-sweep streak camera techniques which allow turn-by-turn measurements will also be presented. The latter measurements are believed to be the first of their kind on a storage ring in the USA.

This document is a plan that identifies the information needed to address relevant issues concerning short-term and long-term safe storage and long-term management of Single-Shell Tank (SST) 241-BX-112

Performance measurement and analysis of the Advanced Photon Source (APS) beam position monitor (BPM) electronics are reported. The results indicate a BPM resolution of 0.16 {mu}m{center_dot}mA/{radical}Hz in terms of the single-bunch current and BPM bandwidth. For the miniature insertion device (ID) BPM, the result was 0.1 {mu}m{center_dot}mA/{radical}Hz. The improvement is due to the 3.6 times higher position sensitivity (in the vertical plane), which is partially canceled by the lower button signal by a factor of 2.3. The minimum single-bunch current required was roughly 0.03 mA. The long-term drift of the BPM electronics independent of the actual beam motion was measured at 2 {mu}m/hr, which settled after approximately 1.5 hours. This drift can be attributed mainly to the temperature effect. Implications of the BPM resolution limit on the global and local orbit feedback systems for the APS storage ring will also be discussed.

The goal of this apparatus is to better enable characterization of tissue samples both on a microscopic scale and across the visible spectrum. The set-up consists of a phase-contrast inverted Nikon microscope, a single-grating imaging spectrometer, a CCD camera, and a computer potentially controlling all three of the previous devices, The computer uses an object-oriented program development environment called LabVIEW to run the three devices. This apparatus will hopefully enable better, less invasive surgical procedures, as well as permitting higher-resolution, more up-close observation of cellular dynamics.

The Winter Fuels Report is intended to provide concise, timely information to the industry, the press, policymakers, consumers, analysts, and State and local governments on the following topics: distillate fuel oil net production, imports and stocks on a US level and for all Petroleum Administration for Defense Districts (PADD) and product supplied on a US level; propane net production, imports and stocks on a US level and for PADD`s I, II, and III; natural gas supply and disposition and underground storage for the US and consumption for all PADD`s, as well as selected National average prices; residential and wholesale pricing data for heating oil and propane for those States participating in the joint Energy Information Administration (EIA)/State Heating Oil and Propane Program; crude oil and petroleum price comparisons for the US and selected cities; and a 6--10-Day and 30-Day outlook for temperature and precipitation and US total heating degree-days by city. This report is published weekly by the EIA starting the second week in October 1995 and will continue until the second week in April 1996. The data will also be available electronically after 5:00 p.m. on Wednesday and Thursday during the heating season through the EIA Electronic Publication System …