A mechanical model for the emplacement pipe system is developed. The model is then employed to determine the force applied to the surface collar of the emplacement pipe, the pipe-stemming load, and the stress along the emplacement pipe as a function of stemming height. These results are presented as integrals and a method for their numerical integration is given.

A retrofit solar water-heating system has been operating for the past two years in a three-story apartment building at Drexel University. The system employs two conventional collector banks (9 PPG collectors) mounted at the latitude angle for Philadelphia of 40 deg from the horizontal and two double-exposure collectors (DEC's) mounted vertically in mirrored enclosures. The relative performance of the conventional and double-exposure collectors has been monitored with an instrumentation system which was developed and installed in the basement of the apartment building. The DEC units have been found to provide from two to four times as much useful heat output per panel area than the PPG collectors. The higher relative performance values occur on clear winter days whereas lower relative performance values are found on clear summer days and generally overcast days. A cost analysis for a DEC unit relative to a conventional collector has also been performed. In the Philadelphia area the DEC units with their mirror enclosures would cost approximately 1.7 times as much per panel area as conventional collectors. Since the DEC units provide two to four times as much useful heat output, they are a cost-effective choice for flat or gently sloping roofs for which they …

The relativistic multigroup diffusion equations describing superthermal electron transport in laser fusion plasmas were derived in an earlier UCRL. A successful numerical scheme based on these equations which is now being used to model laser fusion experiments is described.

Four different models of the migration process have been reviewed to determine their suitability as a working model. While there are several common factors in the models additional factors are included to account for several possible effects. The detail of each model leads to a certain degree of difficulty in applying the model to the problem at hand. One model predicts that inclusions smaller than 0.1 mm dimension probably will not migrate. The other models do not consider size as a factor. Thermal diffusion (Soret effect) is considered insignificant in three models, while in the fourth model it is added to the concentration diffusion term. The following conclusions are made: (1) Temperature is the most significant parameter in all models and must be known as a function of time, and distance from the canister. (2) All four models predict about the same migration velocity for a given set of conditions. For 100/sup 0/C and 1/sup 0/C/cm thermal gradient, the individual values are 3.0, 4.8, 5.6 and 6.4 mm/y. (3) The diffusion of ions through the brine inclusions is the rate controlling mechanism. (4) The difference between the thermal gradients in the liquid and in the solid should always be considered, …

The inertia and friction-welding processes were evaluated for joining aluminum alloy 1100-H14 and Type 316 vacuum-induction melted, vacuum-arc remelted (VIM VAR) stainless steel. While both processes consistently produced joints in which the strength exceeded the strength of the aluminum base metal, 100 percent bonding was not reliably achieved with inertia welding. The deficiency points out the need for development of nondestructive testing techniques for this type of joint. Additionally, solid-state volume diffusion did not appear to be a satisfactory explanation for the inertia and friction-welding bonding mechanism.

When canisters containing radwastes are emplaced in a repository the heat produced by the decaying radwaste will cause moderate thermal gradients to develop which will cause the brine present in a halite medium (salt deposits) to accumulate around the canister. Four different models of the migration process have been reviewed to determine their suitability as a working model. One model predicts that inclusions smaller than 0.1 mm dimension probably will not migrate. The other models do not consider size as a factor. Thermal diffusion (Soret effect) is considered insignificant in three models, while in the fourth model it is added to the concentration diffusion term. The following conclusions can be made: Temperature is the most significant parameter in all models and must be known as a function of time, and distance from the canister. All four models predict about the same migration velocity for it is a given set of conditions; for 100/sup 0/C and 1/sup 0/C/cm thermal gradient, it is 3.0, 4.8, 5.6 and 6.4 mm/y. Diffusion of ions through the brine inclusions is the rate controlling mechanism. The difference between the thermal gradients in the liquid and in the solid should always be considered and is a function …

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Mark White, regarding a legal question submitted for clarification;Effect of amendments to article 21.52 of the Insurance Code.