In the present ISABELLE design, the luminosity at each insertion will be the same, unless special efforts are taken to get a low-..beta.. insertion or reduced crossing angle. These can only change the luminosity by factors of 2 to 4 from insertion to insertion. An estimation of the range of desired luminosities is given.

Most of the components of the Neutral Beam Lines of the Tokamak Fusion Test Reactor (TFTR) will be enclosed in a 50 cubic meter box-shaped vacuum chamber. The chamber will have a number of unorthodox features to accomodate both neutral beam and TFTR requirements. The design constraints, and the resulting chamber design, are presented.

Thirty-nine one meter square proportional chambers with delay line readout were constructed for the external muon identifier of the Fermilab 15 foot bubble chamber. They provide X,Y,U(45/sup 0/) and T (avalanche time) information using a single wire plane, etched strip cathodes and nine amplifiers. They have a time resolution of +-27ns, single particle spatial resolution of +-2 to +-3mm and double particle resolution of approximately 2/sup 1///sub 2/ to 4cm. The energy accessible to each wire is limited so none of the wires in the first 25 chambers has broken since their installation in 1973 to 1974.

The use of electron impact broadened resonance lines to diagnose near-term high density diagnostics is discussed. In particular, the question of how to choose seed and pusher materials to have discernible broadening effects while maintaining line visibility is discussed.

The Tokamak Fusion Test Reactor will be installed at the Princeton Plasma Physics Laboratory facility. This is a major step to reach the goal of fusion power using toroidal magnetic fields for plasma confinement. A major part of this test reactor will be four neutral beam injection systems. These systems will inject 20 MW of 120 kV neutral deuterium atoms into the plasma for 0.5 seconds. In order to achieve the required power input to the plasma, several systems are required within the neutral beam line. These are the source, neutralizer, ion deflection magnet, calorimeter and retraction system, ion dump, cryopumps and vacuum enclosure. All of these systems have constraints imposed which increase the complexity of their designs. Since all systems must operate in a tritium environment, remote handling capabilities must be incorporated into the design. An overview is presented of the Lawrence Livermore Laboratory/Lawrence Berkeley Laboratory Neutral Beam Injection System design. Specifications for the machine and a general description of the total system are presented.

The Tandem Mirror Experiment (TMX) is designed to test the physics of a new approach to Q-enhancement in open confinement systems. In the tandem mirror concept, the ends of a long solenoid are plugged electrostatically by means of ambipolar potential barriers created in two mirror machines or plugs, one at each end of the solenoid. The ambipolar potential in mirror machines develops as a consequence of the higher scattering rate of electrons and the balancing of electron and ion loss rates. The TMX experiment incorporates very few new engineering developments, but it does involve a new way of combining in an integrated system many previously developed ideas. The engineering task is to design the machine that would provide a proof-of-principle evaluation of the tandem mirror concept as rapidly as possible. The preliminary design was started in September 1976 and was completed by December 1976. It led to a cost estimate of $11 million and a scheduled construction period of 18 months.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John L. Hill, regarding a legal question submitted for clarification; May terms of school district trustees be changed from six years to three years?

Progress is reported in six areas of research: air quality, water quality, ecosystem quality, subsidence and seismicity, socioeconomic effects, and integrated assessment. A major goal of the air quality element is to evaluate the rate of emission of H/sub 2/S, CO/sub 2/, H/sub 2/, N/sub 2/, CH/sub 4/, and C/sub 2/H/sub 6/ from the operation of the geothermal loop experimental facility at Niland. Concentrations of H/sub 2/S were found to vary between 1500 to 4900 ppM by volume at the Niland facility. To distinguish between geothermal fluids and other waters, extensive sampling networks were established. A major accomplishment was the installation of a high-resolution subsidence-detection network in the Salton Sea geothermal field area, centered on the test facility at Niland. A major effort went into establishing a background of data needed for subsequent impact assessments related to socioeconomic issues raised by geothermal developments. Underway are a set of geothermal energy scenarios that include power development schedules, technology characterizations, and considerations of power-plant-siting criteria. A Gaussian air-pollution model was modified for use in preliminary air-quality assessments. A crop-growth model was developed to evaluate impacts of gases released from geothermal operations on various agricultural crops. Work is also reported on the legal …

This report addresses the Federal Role of Rural Development.

A target system for the production of /sup 18/F by proton bombardment of H/sub 2//sup 18/O was designed for the ORNL 86-inch cyclotron facility. The system consists of concentric titanium and aluminum cylinders. Oxygen-18-enriched H/sub 2/O circulates through the inner titanium cylinder and through an external heat exchanger with cooling water flowing in the annulus. Yields of 5.0 curies are expected for a 250-..mu..A proton beam current and 24-min irradiation time.