This document contains information about the activities of Douglas United Nuclear at the Hanford Reservation during the month of September 1970.

Pressure-volume, uniaxial stress loading to failure, uniaxial strain, and acoustic velocity determinations were made on Blair dolomite at confining pressures ranging to 3.5 GPa (Pa = Paschals where 10/sup 5/ Pa = 1 bar or 0.1 GPa = 1 kbar). The bulk modulus K, rapidly rises from an initial 10.4 GPa (at atmospheric pressure) to 102.0 GPa at 1 GPa pressure. At higher pressures, K remains essentially constant (110 GPa). The maximum volume change on loading is 3.9% at 3.5 GPa; the unloading closely follows the loading path. Comparison of uninxial stress tests in compression to 0.7 GPa and extension to 2.1 GPa confining pressure demonstrates that the characteristic shear stress at failure as well as the transition from brittle fracture to ductile flow is strongly dependent upon both the value of the intermediate principal stress sigma /sub 2/ and the rate of strain. The onset of dilatancy as determined in uniaxial compression occurs at about two-thirds of the failure stress. The uniaxial strain loading path is well below the failure envelope in compression. In uniaxial stress loading (compression), Young' s modulus (E) and shear modulus ( mu ) are demonstrated to be very sensitive to both confining pressure and …

It was demonstrated that a transient surface-current pulse can be sensed and recorded by a graded-Hc film, a magnetic film with the coercive force Hc varying along the length of the film. Information on the magnitude of the current can be obtained by comparing the domain-wall location with the distribution of Hc value along the film. The transient characteristic of the current pulse can be deduced from the V-shaped configuration of the domain wall. (auth)

None

None

As a result of an explosion in the Waste Treatment Facility, 242-Z Building, 200 West Area of the Hanford Reservation on August 30, 1976, the Manager of the Richland Operations Office (RL), Energy Research and Development Administration (ERDA), appointed an ERDA Committee to conduct a formal investigation and to prepare a report on their findings of this occurrence. The Committee was instructed to conduct the investigation in accordance with ERDAMC 0502, insofar as circumstances would permit, to cover and explain technical elements of the casual sequence(s) of the occurrence, and to describe management systems which should have or could have prevented the occurrence. This report is the result of the investigation and presents the conclusions of the review.

Low-resolution field ionization and high-resolution 70-eV electron-impact mass spectra data were obtained for 28 GPC fractions acquired from Bartlett, Kansas, heavy petroleum by members of the Separation and Characterization group at the Bartlesville Energy Research Center. This group was supplied with most-probable empirical formulas deduced from the high resolution electron-impact data. Analysis of the qualitative and quantitative analytical data previously obtained for GPC fractions from a Synthoil sample by high- and low-resolution field-ionization and high-resolution 70-eV electron-impact mass spectrometry is essentially complete. A study of field-ionization sensitivities for saturates and mixtures of saturates and aromatics is in progress. Components required to modify the combined FI/EI ion source to permit operation in the field desorption mode have been ordered.

A megachannel pulse-height analysis system using a PDP-8/E computer and two moving-head disk memories has been developed. The system has a storage capacity of 220 memory locations, is capable of processing 1100 events/s, and provides on-line sorting and disk storage. An X- or Y-pulse-height spectrum in coincidence with one or several arbitrary pulse-height windows can be assembled in core for scope display and spectral analysis within 2 to 20 seconds. Reconstruction of a complete X- or Y-pulse-height spectrum requires about 3 minutes.

Thirty-nine one meter square proportional chambers with delay line readout were constructed for the external muon identifier of the Fermilab 15 foot bubble chamber. They provide X,Y,U(45/sup 0/) and T (avalanche time) information using a single wire plane, etched strip cathodes and nine amplifiers. They have a time resolution of +-27ns, single particle spatial resolution of +-2 to +-3mm and double particle resolution of approximately 2/sup 1///sub 2/ to 4cm. The energy accessible to each wire is limited so none of the wires in the first 25 chambers has broken since their installation in 1973 to 1974.

A target system for the production of /sup 18/F by proton bombardment of H/sub 2//sup 18/O was designed for the ORNL 86-inch cyclotron facility. The system consists of concentric titanium and aluminum cylinders. Oxygen-18-enriched H/sub 2/O circulates through the inner titanium cylinder and through an external heat exchanger with cooling water flowing in the annulus. Yields of 5.0 curies are expected for a 250-..mu..A proton beam current and 24-min irradiation time.

Progress is reported in six areas of research: air quality, water quality, ecosystem quality, subsidence and seismicity, socioeconomic effects, and integrated assessment. A major goal of the air quality element is to evaluate the rate of emission of H/sub 2/S, CO/sub 2/, H/sub 2/, N/sub 2/, CH/sub 4/, and C/sub 2/H/sub 6/ from the operation of the geothermal loop experimental facility at Niland. Concentrations of H/sub 2/S were found to vary between 1500 to 4900 ppM by volume at the Niland facility. To distinguish between geothermal fluids and other waters, extensive sampling networks were established. A major accomplishment was the installation of a high-resolution subsidence-detection network in the Salton Sea geothermal field area, centered on the test facility at Niland. A major effort went into establishing a background of data needed for subsequent impact assessments related to socioeconomic issues raised by geothermal developments. Underway are a set of geothermal energy scenarios that include power development schedules, technology characterizations, and considerations of power-plant-siting criteria. A Gaussian air-pollution model was modified for use in preliminary air-quality assessments. A crop-growth model was developed to evaluate impacts of gases released from geothermal operations on various agricultural crops. Work is also reported on the legal …

The Tokamak Fusion Test Reactor will be installed at the Princeton Plasma Physics Laboratory facility. This is a major step to reach the goal of fusion power using toroidal magnetic fields for plasma confinement. A major part of this test reactor will be four neutral beam injection systems. These systems will inject 20 MW of 120 kV neutral deuterium atoms into the plasma for 0.5 seconds. In order to achieve the required power input to the plasma, several systems are required within the neutral beam line. These are the source, neutralizer, ion deflection magnet, calorimeter and retraction system, ion dump, cryopumps and vacuum enclosure. All of these systems have constraints imposed which increase the complexity of their designs. Since all systems must operate in a tritium environment, remote handling capabilities must be incorporated into the design. An overview is presented of the Lawrence Livermore Laboratory/Lawrence Berkeley Laboratory Neutral Beam Injection System design. Specifications for the machine and a general description of the total system are presented.

In the present ISABELLE design, the luminosity at each insertion will be the same, unless special efforts are taken to get a low-..beta.. insertion or reduced crossing angle. These can only change the luminosity by factors of 2 to 4 from insertion to insertion. An estimation of the range of desired luminosities is given.

The Tandem Mirror Experiment (TMX) is designed to test the physics of a new approach to Q-enhancement in open confinement systems. In the tandem mirror concept, the ends of a long solenoid are plugged electrostatically by means of ambipolar potential barriers created in two mirror machines or plugs, one at each end of the solenoid. The ambipolar potential in mirror machines develops as a consequence of the higher scattering rate of electrons and the balancing of electron and ion loss rates. The TMX experiment incorporates very few new engineering developments, but it does involve a new way of combining in an integrated system many previously developed ideas. The engineering task is to design the machine that would provide a proof-of-principle evaluation of the tandem mirror concept as rapidly as possible. The preliminary design was started in September 1976 and was completed by December 1976. It led to a cost estimate of $11 million and a scheduled construction period of 18 months.

Most of the components of the Neutral Beam Lines of the Tokamak Fusion Test Reactor (TFTR) will be enclosed in a 50 cubic meter box-shaped vacuum chamber. The chamber will have a number of unorthodox features to accomodate both neutral beam and TFTR requirements. The design constraints, and the resulting chamber design, are presented.

The use of electron impact broadened resonance lines to diagnose near-term high density diagnostics is discussed. In particular, the question of how to choose seed and pusher materials to have discernible broadening effects while maintaining line visibility is discussed.

Two approaches were made to studies on genetic recombination in Chinese hamster cells: cytogenetics and the synthesis of a hybrid cell line containing two noncomplementing nutritional mutants, presumably in the same cistron, that can be used to detect crossing over to produce nutritional independence. The cytogenetic approach was used to characterize existing mutants and to study new mutants. It is also being used to characterize the parents of the hybrids and the hybrids themselves with a view that prototrophic recombinants selected biochemically will also show recombination cytologically. (HLW)

Single-charge and row-charge subsurface cratering experiments were performed to learn how close-spacing enhances single-crater dimensions. Our first experimental phase established cratering curves for 60-lb charges of the chemical explosive. For the second phase, to be described in a subsequent report, the Row-cratering experiments were designed and executed. This data report contains excavated dimensions and auxiliary data for the single-charge cratering experiments. The dimensions for the row-charge experiments will be in the other report. Significant changes in the soil's water content appeared to cause a variability in the excavated dimensions. This variability clouded the interpretation and application of the cratering curves obtained.

The production of UF/sub 6//sup -/ by reaction of a collimated stream of fluorine gas with a resistively heated uranium wire was studied at temperatures from 870 to 1020/sup 0/C and pressures less than 10/sup -3/ torr. At these temperatures below the uranium melting point, the formation of UF/sub 3/ intermediate on the uranium surface resulted in low UF/sub 6//sup -/ yields. The kinetic energy of the UF/sub 6//sup -/ ion was on the order of thermal energies. The work function of uranium was measured to be 4.20 +- 0.14 eV.

The relativistic multigroup diffusion equations describing superthermal electron transport in laser fusion plasmas were derived in an earlier UCRL. A successful numerical scheme based on these equations which is now being used to model laser fusion experiments is described.

A mechanical model for the emplacement pipe system is developed. The model is then employed to determine the force applied to the surface collar of the emplacement pipe, the pipe-stemming load, and the stress along the emplacement pipe as a function of stemming height. These results are presented as integrals and a method for their numerical integration is given.

A retrofit solar water-heating system has been operating for the past two years in a three-story apartment building at Drexel University. The system employs two conventional collector banks (9 PPG collectors) mounted at the latitude angle for Philadelphia of 40 deg from the horizontal and two double-exposure collectors (DEC's) mounted vertically in mirrored enclosures. The relative performance of the conventional and double-exposure collectors has been monitored with an instrumentation system which was developed and installed in the basement of the apartment building. The DEC units have been found to provide from two to four times as much useful heat output per panel area than the PPG collectors. The higher relative performance values occur on clear winter days whereas lower relative performance values are found on clear summer days and generally overcast days. A cost analysis for a DEC unit relative to a conventional collector has also been performed. In the Philadelphia area the DEC units with their mirror enclosures would cost approximately 1.7 times as much per panel area as conventional collectors. Since the DEC units provide two to four times as much useful heat output, they are a cost-effective choice for flat or gently sloping roofs for which they …

The inertia and friction-welding processes were evaluated for joining aluminum alloy 1100-H14 and Type 316 vacuum-induction melted, vacuum-arc remelted (VIM VAR) stainless steel. While both processes consistently produced joints in which the strength exceeded the strength of the aluminum base metal, 100 percent bonding was not reliably achieved with inertia welding. The deficiency points out the need for development of nondestructive testing techniques for this type of joint. Additionally, solid-state volume diffusion did not appear to be a satisfactory explanation for the inertia and friction-welding bonding mechanism.

Four different models of the migration process have been reviewed to determine their suitability as a working model. While there are several common factors in the models additional factors are included to account for several possible effects. The detail of each model leads to a certain degree of difficulty in applying the model to the problem at hand. One model predicts that inclusions smaller than 0.1 mm dimension probably will not migrate. The other models do not consider size as a factor. Thermal diffusion (Soret effect) is considered insignificant in three models, while in the fourth model it is added to the concentration diffusion term. The following conclusions are made: (1) Temperature is the most significant parameter in all models and must be known as a function of time, and distance from the canister. (2) All four models predict about the same migration velocity for a given set of conditions. For 100/sup 0/C and 1/sup 0/C/cm thermal gradient, the individual values are 3.0, 4.8, 5.6 and 6.4 mm/y. (3) The diffusion of ions through the brine inclusions is the rate controlling mechanism. (4) The difference between the thermal gradients in the liquid and in the solid should always be considered, …