Progress is reported for the period from July 1, 2003 to September 30, 2003. Conductivity testing between the CO{sub 2}I No.1 and CO{sub 2} No.13 was performed over the period 08/20/03 through 09/05/03. Observed response in CO{sub 2} 13 production rates to changes in CO{sub 2}I No.1 injection rates are consistent with sufficient permeability between CO{sub 2}I No.1 and CO{sub 2} No.13 for a viable CO{sub 2} flood with a sufficient Process Pore Volume Rate (PPV). Based on the permeabilities near the CO{sub 2} No.16, a 2-producing well pattern has been determined to be optimal but may be changed during the flood depending on the response observed in the CO{sub 2} No.16. Present inter-well test results indicate there is greater permeability architecture complexity than originally predicted and that a low-permeability region or barrier that restricts but does stop flow may exist between the CO{sub 2}I No.1 and the CO{sub 2} No.13. Pilot area repressurization began on 09/05/03, immediately after CO{sub 2}I No.1-CO{sub 2} No.13 conductivity testing was complete, by increasing injection in the CO{sub 2}I No.1, CO{sub 2} No.10, and CO{sub 2} No.18. Adequate reservoir pressure in the portion of the pilot area needed to be above minimum miscibility pressure …