Recommendations of a committee for a new standard to meet needs of new high-energy physics experiments are summarized in a nontechnical manner. Existing standards, including CAMAC, were examined; it was felt that none would meet the future needs of high-energy physics. The original committee gave its recommendations and disbanded. The design committee has begun its work; it anticipates finishing in about two years, in time for application of its recommendations to ISABELLE. (RWR)

The rationale for hybrid fusion-fission reactors is the production of fissile fuel for fission reactors. A new class of reactor, the fission-suppressed hybrid promises unusually good safety features as well as the ability to support 25 light-water reactors of the same nuclear power rating, or even more high-conversion-ratio reactors such as the heavy-water type. One 4000-MW nuclear hybrid can produce 7200 kg of /sup 233/U per year. To obtain good economics, injector efficiency times plasma gain (eta/sub i/Q) should be greater than 2, the wall load should be greater than 1 MW.m/sup -2/, and the hybrid should cost less than 6 times the cost of a light-water reactor. Introduction rates for the fission-suppressed hybrid are usually rapid.

The direct energy conversion efficiencies calculated for Cat-D and D-/sup 3/He fueled Tokamak reactors are summarized over a range of reactor designs, collector configurations, assumed T/sub e//T/sub i/ ratios, and power densities. The performance of a system of superconducting coils that produce those fields required to guide escaping plasma along the path between the bundle divertor coils and the direct converter is also discussed.

The development of hydrothermal energy for direct heat applications is being aided by twenty-two demonstration projects that are funded on a cost-sharing basis by the US Department of Energy, Division of Geothermal Energy. These projects are designed to demonstrate the technical and economic feasibility of the direct use of geothermal heat in the United States. Twelve of these projects are administered by the DOE-Idaho Operations Office with technical support from EG and G Idaho, Inc. Engineering and economic data for these projects are summarized in this paper. The data and experience being generated by these projects will be an important basis for future geothermal direct use projects.

The US Department of Energy (DOE) is involved in numerous geothermal research, development, demonstration, and loan guaranty projects in the State of California. These projects often require the preparation of both an Environmental Impact Report (EIR), as required by California Environmental Quality Act (CEQA), and an Environmental Assessment (EA) or Impact Statement (EIS) as required under NEPA. DOE adoption or utilization of information contained in EIR's to meet that agency's NEPA requirements and thereby reduce duplication of effort is dependent on four critical issues: (1) the scope of the proposed action analyzed, (2) the completeness of treatment of environmental issues, (3) the level of DOE involvement in EIR preparation, and (4) the timing of DOE involvement in EIR preparation. At this time, several constraints prevent the integration of the DOE Loan Guaranty and CEQA environmental review and documentation processes. First, the time required to complete an EIR (up to 2 years in some cases) is not compatible with DOE's goal of processing loan guaranty applications within a 4 month period. Second, the CEQA process is usually initiated and completed prior to DOE's involvement in the project. Therefore, DOE often has no role in document preparation and must verify the content …

This draft report was prepared as required by Task No. 2 of the US Department of Energy, Grant No. DE-FG07-89ID12850 Reverse Trade Mission to Acquaint International Representatives with US Power Plant and Drilling Technology'' (mission). As described in the grant proposal, this report covers the reactions of attendees toward US technology, its possible use in their countries, and an evaluation of the mission by the staff leaders. Note this is the draft report of one of two missions carried out under the same contract number. Because of the diversity of the mission subjects and the different attendees at each, a separate report for each mission has been prepared. This draft report has been sent to all mission attendees, specific persons in the US Department of Energy and Los Alamos National Lab., the California Energy Commission (CEC), and various other governmental agencies.

The purpose of the present program is to develop soluble analogs of surface confined catalysts that can be impregnated directly into the coal structure at low temperatures. This approach should avoid problems related to surface area dependence, a two phase (surface-liquid) reaction system and, mass transport limitations. Heteropolyanions (HPAs) offer the opportunity to develop soluble forms of surface confined catalysts. HPAs are multi-functional catalysts that could be used to promote both hydroliquefaction and hydrotreating. In theory, these functions could be employed sequentially or simultaneously and could permit exceptional control of liquefaction reactions and reaction conditions. Thus, the current research program involves efforts to evaluate HPAs as soluble liquefaction nd hydrotreating catalysts, with the goal of developing soluble analogs of surface confined catalysts.

The interaction between carbon and hydrogen atoms on a Ru(0001) surface was studied using scanning tunneling microscopy (STM), Density Functional Theory (DFT) and STM image calculations. Formation of CH species by reaction between adsorbed H and C was observed to occur readily at 100 K. When the coverage of H increased new complexes of the form CH+nH (n = 1, 2 and 3) were observed. These complexes, never observed before, might be precursors for further hydrogenation reactions. DFT analysis reveals that a considerable energy barrier exists for the CH+H {yields} CH{sub 2} reaction.

None

Charm semileptonic decays allow a validation of lattice QCD calculations through the measurement of the hadronic form factors, which characterize the effect of strong interaction in these reactions. The accuracy of such calculations is crucial for the improvement of the test of the standard model in flavor physics. This thesis presents a study of the D{sub s}{sup +} {yields} K{sup +}K{sup -}e{sup +}{nu}{sub e} channel using 214 fb{sup -1} recorded by de BAbar experiment. For events with a K{sup +}K{sup -} mass in the range between 1.01 GeV/c{sup 2} and 1.03 Gev/c{sup 2}, the {phi} {yields} K{sup +}K{sup -} is the dominant component. Using the simple pole model to parameterize the q{sup 2} dependence of the form factors -V(q{sup 2}), A{sub 1}(q{sup 2}) and A{sub 2}(q{sup 2})- the following ratios are measured at q{sup 2} = 0; {tau}{sub V} = V(0)/A{sub 1}(0) = 1.868 {+-} 0.061 {+-} 0.079, r{sub 2} = A{sub 2}(0)/A{sub 1}(0) = 0.763 {+-} 0.072 {+-} 0.062. The mass pole of the axial-vector form factor is also obtained: m{sub A} = (2.30{sub -0.18}{sup +0.42} {+-} 0.21) GeV/c{sup 2}. In the same mass range, the semileptonic branching fraction, relative to the D{sub s}{sup +} {yields} {phi}{pi}{sup +} channel, …

A concerted experimental and computational study of energy transfer in nucleic acid bases and charge transfer in dialkylaminobenzonitriles, and related electron donor-acceptor molecules, indicate that the ultrafast photoprocesses occur through three-state conical interactions involving an intermediate state of biradical character.

In a search for B {yields} c{bar c}{gamma} K decays with the BABAR detector, where c{bar c} includes J/{psi} and {psi}(2S), and K includes K{sup {+-}}, K{sub S}{sup 0} and K*(892), they find evidence for X(3872) {yields} J/{psi}{gamma} and X(3872) {yields} {psi}(2S){gamma} with 3.6{sigma} and 3.5{sigma} significance, respectively. They measure the product of branching fractions {Beta}(B{sup {+-}} {yields} X (3872)K{sup {+-}}) {center_dot} {Beta}(X(3872) {yields} J/{psi}{gamma}) = (2.8 {+-} 0.8(stat.) {+-} 0.2(syst.)) x 10{sup -6} and {Beta}(B{sup {+-}} {yields} X(3872)K{sup {+-}}) {center_dot} {Beta}(X(3872) {yields} {psi}(2S){gamma}) = (9.9 {+-} 2.9(stat.) {+-} 0.6(syst.)) x 10{sup -6}.

I have understood my assignment as a review of some of the work done in high-energy physics with polarized proton targets and a description of some of the special problems connected with polarized targets. Most of my report will be based on the polarized target that I am most familiar with--that constructed by Jeffries, Schultz, Shapiro, and myself. This target is no longer unique; in fact, it is now somewhat old-fashioned in some respects. Other polarized proton targets are in operation at CERN, Saclay, the Rutherford Laboratory, Argonne National Laboratory, the Soviet Union, and there is a target newly in operation at the Brookhaven Laboratory. Other targets are in operation or are in the process of design or construction at a number of other places. Unfortunately, none of these targets consists of pure hydrogen. The target material most often used is made of lanthanum magnesium nitrate, LMN. About a quarter of the weight of this crystal is water; it is the protons within the water molecules that are polarized. Hydrogen constitutes only 3 percent of the weight of the crystal. This means that scattering processes on hydrogen must be distinguished kinematically from scattering processes involving the heavy elements of the …

The authors present a study of the charmless semileptonic B-meson decays B{sup +} {yields} {omega}{ell}{sup +}{nu} and B{sup +} {yields} {eta}{ell}{sup +}{nu}. The analysis is based on 383 million B{bar B} pairs recorded at the {Upsilon}(4S) resonance with the BABAR detector. The {omega} mesons are reconstructed in the channel {omega} {yields} {pi}{sup +}{pi}{sup -}{pi}{sup 0} and the {eta} mesons in the channels {eta} {yields} {pi}{sup +}{pi}{sup -}{pi}{sup 0} and {eta} {yields} {gamma}{gamma}. They measure the branching fractions {Beta}(B{sup +} {yields} {omega}{ell}{sup +}{nu}) = (1.14 {+-} 0.16{sub stat} {+-} 0.08{sub syst}) x 10{sup -4} and {Beta}(B{sup +} {yields} {eta}{ell}{sup +}{nu}) = (0.31 {+-} 0.06{sub stat} {+-} 0.08{sub syst}) x 10{sup -4}.

The authors present the first observation of the bottomonium ground state {eta}{sub b}(1S) in the photon energy spectrum using a sample of (109 {+-} 1) million of {Upsilon}(3S) events recorded at the {Upsilon}(3S) energy with the BaBar detector at the PEP-II B factory at SLAC. A peak at E{sub {gamma}} = 921.2{sub -2.8}{sup +2.1}(stat) {+-} 2.4(syst) MeV observed with a significance of 10 standard deviations in the photon energy spectrum is interpreted as being due to the radiative transition {Upsilon}(3S) {yields} {gamma} {eta}{sub b}(1S). This photon energy corresponds to an {eta}{sub b}(1S) mass of 9388.9{sub -2.3}{sup +3.1}(stat) {+-} 2.7(syst) MeV/c{sup 2}. The hyperfine {Upsilon}(1S)-{eta}{sub b}(1S) mass splitting is 71.4{sub -3.1}{sup +2.3}(stat) {+-} 2.7(syst) MeV/c{sup 2}. The branching fraction for this radiative {Upsilon}(3S) decay is obtained as (4.8 {+-} 0.5(stat) {+-} 1.2(syst)) x 10{sup -4}.

This report discusses the status and the accomplishments of the environmental protection program at Argonne National Laboratory for calendar year 2007. The status of Argonne environmental protection activities with respect to compliance with the various laws and regulations is discussed, along with the progress of environmental corrective actions and restoration projects. To evaluate the effects of Argonne operations on the environment, samples of environmental media collected on the site, at the site boundary, and off the Argonne site were analyzed and compared with applicable guidelines and standards. A variety of radionuclides were measured in air, surface water, on-site groundwater, and bottom sediment samples. In addition, chemical constituents in surface water, groundwater, and Argonne effluent water were analyzed. External penetrating radiation doses were measured, and the potential for radiation exposure to off-site population groups was estimated. Results are interpreted in terms of the origin of the radioactive and chemical substances (i.e., natural, fallout, Argonne, and other) and are compared with applicable environmental quality standards. A U.S. Department of Energy dose calculation methodology, based on International Commission on Radiological Protection recommendations and the U.S. Environmental Protection Agency's CAP-88 Version 3 (Clean Air Act Assessment Package-1988) computer code, was used in preparing this …

Excellence in Laboratory operations is one of the three key goals of the Oak Ridge National Laboratory (ORNL) Agenda. That goal will be met through comprehensive upgrades of facilities and operational approaches over the next few years. Many of ORNL's physical facilities, including the liquid and gaseous waste collection and treatment systems, are quite old, and are reaching the end of their safe operating life. The condition of research facilities and supporting infrastructure, including the waste handling facilities, is a key environmental, safety and health (ES&H) concern. The existing infrastructure will add considerably to the overhead costs of research due to increased maintenance and operating costs as these facilities continue to age. The Liquid Gaseous Waste Treatment System (LGWTS) Reengineering Project is a UT-Battelle, LLC (UT-B) Operations Improvement Program (OIP) project that was undertaken to develop a plan for upgrading the ORNL liquid and gaseous waste systems to support ORNL's research mission.

In the Santa Maria Basin, Santa Barbara County, California, four wells were processed and examined to determine the age and environment parameters in the oil producing sections. From west to east, we examined Cabot No. 1 Ferrero-Hopkins,from 3917.7 m (12850 ft) to 4032 m (13225 ft); Sun No. 5 Blair, from 3412 m (11190 ft) to 3722.5 m (12210 ft); Triton No. 10 Blair, from 1552 m (5090 ft) to 1863 m (6110 ft); and OTEC No. 1 Boyne, from 2058 m (6750 ft) to 2528 m (8293 ft). Lithic reports with lithic charts were prepared and submitted on each well. These tested for Sisquoc Fm lithology to be found in the Santa Maria area. This was noted in the OTEC No. 1 Boyne interval studied. The wells also tested for Monterey Fm. lithology, which was noted in all four wells examined. Composite samples of those intervals [combined into 9.15 m (30 foot) intervals] were processed for paleontology. Although the samples were very refractory and siliceous, all but one (Sun 5 Blair) yielded index fossil specimens, and as Sun 5 Blair samples below 3686 m (12090 ft) were processed previously, we were able to make identifications that would aid this …

The objective of this evaluation is to provide recommendations to ensure consistency between the technical baseline requirements, baseline design, and the as-constructed Subsurface Lighting System. Recommendations for resolving discrepancies between the as-constructed system, and the technical baseline requirements are included in this report. Cost and Schedule estimates are provided for all recommended modifications. This report does not address items which do not meet current safety or code requirements. These items are identified to the CMO and immediate action is taken to correct the situation. The report does identify safety and code items for which the A/E is recommending improvements. The recommended improvements will exceed the minimum requirements of applicable code and safety guide lines. These recommendations are intended to improve and enhance the operation and maintenance of the facility.

We present an extensive experimental characterization of the e{sup {+-}} phase space at the interaction point of the SLAC PEP-II B-Factory, that combines a detailed mapping of luminous-region observables using the BABAR detector, with stored-beam measurements by accelerator techniques.

The capacity of photosynthetic organisms to exhibit photo-induced electron paramagnetic resonance (EPR) signals has been known for over ten years. Subcellular units of photosynthetic materials, the quantasomes and the chromatophores, are capable of Hill Reaction activity, and also of exhibiting the light-induced EPR signals. This, coupled with the rapid rise and decay kinetics of these signals, suggests but does not prove that the unpaired electrons are involved in the initial electron transfer processes in the primary quantum conversion act. The identification of the species giving rise to these signals and their connection with processes of primary quantum conversion remains elusive even though such varied approaches as mutant strains, special growth conditions, extreme physical conditions, special metabolic inhibitors, etc. have been applied to this problem. In this communication the authors wish to report another method being used in an attempt to identify the species responsible for the unpaired electrons. Hoffman prepared a water soluble, stable free radical, di-tertiary-butylnitroxide (hereafter called DTBN), which is a 'vigorous free radical scavenger'. It shows a sharp, well resolved, symmetrical, three-line paramagnetic resonance spectrum that is relatively insensitive to the molecular environment. The chemistry of di-tertiary butylnitroxide has not been studied extensively. However, four distinct types …

In this project, General Electric Energy and Environmental Research Corporation (EER) developed a novel mercury (Hg) control technology in which the sorbent for gas-phase Hg removal is produced from coal in a gasification process in-situ at a coal burning plant. The main objective of this project was to obtain technical information necessary for moving the technology from pilot-scale testing to a full-scale demonstration. A pilot-scale gasifier was used to generate sorbents from both bituminous and subbituminous coals. Once the conditions for optimizing sorbent surface area were identified, sorbents with the highest surface area were tested in a pilot-scale combustion tunnel for their effectiveness in removing Hg from coal-based flue gas. It was determined that the highest surface area sorbents generated from the gasifier process ({approx}600 m{sup 2}/g) had about 70%-85% of the reactivity of activated carbon at the same injection rate (lb/ACF), but were effective in removing 70% mercury at injection rates about 50% higher than that of commercially available activated carbon. In addition, mercury removal rates of up to 95% were demonstrated at higher sorbent injection rates. Overall, the results of the pilot-scale tests achieved the program goals, which were to achieve at least 70% Hg removal from baseline …

A combination of cyclic polarization tests, electrochemical impedance spectroscopy, and electrochemical quartz crystal microbalance (EQCM) measurements indicate a film is formed when aluminum is polarized above 4.5V in 1:1 EC+DMC with 1M LiBOB. The quantity of film that is formed increases with increasing applied potential. Results of EQCM tests suggest the film is AlBO{sub 3}. The film is very protective against corrosion and inhibits pitting corrosion of aluminum in normally corrosive 1M LiTFSI.

We present the discovery of a new quadruply lensed quasar. The lens system, SDSS J1330+1810 at z{sub s} = 1.393, was identified as a lens candidate from the spectroscopic sample of the Sloan Digital Sky Survey. Optical and near-infrared images clearly show four quasar images with a maximum image separation of 1.76 inch, as well as a bright lensing galaxy. We measure a redshift of the lensing galaxy of z{sub 1} = 0.373 from absorption features in the spectrum. We find a foreground group of galaxies at z = 0.31 centred {approx} 120 inch southwest of the lens system. Simple mass models fit the data quite well, including the flux ratios between images, although the lens galaxy appears to be {approx} 1 mag brighter than expected by the Faber-Jackson relation. Our mass modeling suggests that shear from nearby structure is affecting the lens potential.