From data obtained from two loops, the use of beryllium in Inconel systems containing molten sodium appears feasible if the temperature is held below 1200 deg F. (J.E.D.)

Report presenting an investigation of the pumping characteristics of eight conical ejectors mounted on a fuselage portion of a supersonic airplane. The diameter ratio, spacing ratio, nozzle pressure, and ejector weight flows were varied. Results regarding the ejector pumping characteristics, comparison with previous results, comparison of data for cold and hot primary flow, and ejector air-supply requirements are provided.

Report presenting an investigation of the pumping characteristics of eight conical ejectors mounted on a scale fuselage portion of a supersonic airplane. The configurations simulated various positions of a two-position nozzle with a fixed shroud and double-iris exit. Results regarding ejector pumping characteristics, comparison with previous results, comparison of data for cold and hot primary flow, and ejector air-supply requirements are provided.

From abstract: Uranium on the Hooper Tunnel level of the Crescent mine, Shoshone county, Idaho, occurs in two red, iron oxide-stained radioactive zones in and along the hanging wall of Alhambra fault.

None

Abstract: "The problem of maintaining livable oxygen and carbon dioxide pressures in a closed space in which men must live leads to consideration of the possible use of the photosynthesis of green algae. A calculation based on the known respiratory rate of man and the photosynthetic rates of Chlorella indicates that it would be feasible to use algae for this purpose."

"A method is described for measuring the dynamic stability derivatives of a model airplane in a wind tunnel. The characteristic features of this system are that single-degree-of-freedom oscillations were used to obtain combinations of rolling, yawing and pitching motions; that the oscillations were excited and controlled by velocity feedback which permitted operation under conditions unfavorable for more conventional types of oscillatory testing; and that data processing was greatly simplified by using analog computer elements in the strain-gage circuitry. A small number of experimental data are included to illustrate the general scope of results obtainable with this system" (p. 1).

The equations of the individual processes of self nucleation are utilized through an electrical analogy to obtain the nucleation frequency. This process is shown to be shorter and less subject to error than that of previous investigators since the appearance of indeterminant integration constants is completely avoided. With the nucleation frequencies of crystals and spheres the Ostwald law of stages is reviewed and modified.

A spectrophotometric method used in the determination of thorium was modified for the purpose of analyzing plutonium alloys which contained 0.01 to 0.8 percent thorium. Absorbance values were measured at 545 millimicrons for solutions containing thorium and thorin, the organic reagent added to form a colored complex with thorium in the presence of plutonium (III) . With plutonium-thorium 0.8 percent thorium, the average recovery of thorium was 99.6 +- 1.5 percent. For similar samples containing 0.01 to 0.2 percent thorium, the average recovery 101.0 +- 3.4 percent, after the thorium was separated from plutonium by precipitation of thorium fluoride with the aid of lanthanum fluoride as a carrier.

The techniques for assembling, processing and handling large nuclear-emulsion stacks are discussed. Results of experiments varying the development procedure are presented.

Investigations were conducted to determine the mechanical properties of Na sheared in a narrow annulus at controlled temperature gradients and shear velocities. The test fixture consisted of a 1 in. diameter stainless-steel shaft centered in a 1.099 in. ID Type-304 stainless-steel tube. Sodium shear values were found to be dependent upon the temperature and shear velocity at a given test condiiion. Sodium shear values obtained were found to be consistent, wherever wetting of components had been assured by contact with hot Na at temperatures above 500 deg F for periods or one-half hour or greater. Tests conducted showed Na shear to have occurred internally, rather than at freeze-seal interfaces within the range of shaft velocities tested. The apparent shear strengih of Na was found to fall off rapidly with successive shearing cycles to steady-staie values corresponding to particular shearing velocities. Tests showed that with the freeze-seal at rest, a healing action occurred as a function of time, resulting in substantially complete regaining of initial shear strength. (auth)

The index of refraction of PuO2 made by thermal decomposition of PU(C2O2, 6H2O gradually increases from a value < 1.9 to 2.40 as the decomposition temperature is increased from 150 degree to l000 degree C. This change in refractive index parallels a gradual change in the x-ray diffraction pattern from weak, diffuse lines for PuO2 ignited at 150° to sharp, well resolved lines for PuO2 ignited at 1000°C. Similar results are observed for PuO2 made by thermal decomposition of Pu2(C2O4)3*11H2O. The refractive index of PuO2 made from Pu metal at 170°C is 2.40 and is not affected by further ignition at higher temperatures, although crystal growth does occur. The rate of solution of PuO2 in an HCl-KI solution is greatest for samples prepared at low temperatures and decreases markedly for oxides ignited at higher temperatures. These observations hive been interpreted to mean that ignition at higher temperatures causes a gradual perfection of the originally highly distorted and impurity-containing PuO2 lattice obtained by low temperature decomposition of the oxalates and promotes the slow growth of crystallites. Both factors decrease the reactivity of the PuO2.

Report presenting turbulent-heat-transfer measurements obtained through the use of a three-dimensional axially symmetric annual nozzle consisting of an inner shaped plug and an outer cylindrical sleeve at Mach number 3.03. Results regarding the variation of wall temperature with longitudinal distance, variation of local Nusselt number with local Reynolds number, and variation of local temperature-recovery factor with local Reynolds number are provided.

"The lift, drag, and pitching-moment characteristics of the AGARD Calibration Model B as determined in the Langley 9-inch supersonic tunnel are presented at Mach numbers of 1.62, 1.94, and 2.41 and at a Reynolds number, based on body length, of approximately 3.0 x 10(exp 6). The zero-lift drag data compared favorably with available data and were in the proper sequence for the effects of Reynolds number" (p. 1).

Report discussing a method for using benzidine to identify altered tuff in sandstone. The method is "practical for field or field laboratory studies associated with stratigraphic correlations, mineral deposit investigations, or paleogeographic interpretations."

Report presenting development tests on a model of the Republic F-105 airplane at a Mach number of 0.20. The purpose of the current investigation is to obtain the longitudinal force and moment characteristics of the model equipped with trailing-edge flaps of various spans and deflections. Results regarding the longitudinal stability characteristics and effect of the horizontal tail are provided.

Memorandum presenting development tests on a scale model of the Republic F-105 airplane in the 19-foot pressure tunnel. The second phase, which is presented in this report, was made at a Reynolds number of 9.0 x 10(exp 6) and a Mach number of 0.20. The purpose of the tests was to obtain the longitudinal force and moment characteristics of the model equipped with trailing-edge flaps of various spans and deflections.

This technical report is concerned with a theoretical investigation of the variation of the regeneration factor [gamma] in a Th232 - U235 thermal reactor. The abundances of the significant isotopes in the thorium-uranium cycle have been derived as a function of irradiation time at constant reactor power. The change in [gamma] as a function of irradiation time at constant power was calculated for combinations of enrichment and resonance escape probability considered likely to exist in a thermal reactor. The effect upon [gamma] of the the absorption cross section of 91Pa233 and of the fission products has been shown.

None

Report presenting an investigation of the effect of yaw and angle of attack on the total-pressure recovery and mass-flow characteristics of a rectangular supersonic scoop inlet designed to have low external drag at a Mach number of 2.7 and an angle of attack of 0 degrees. Total-pressure recovery and mass-flow data are presented for a Mach number of 2.71 at angles of yaw 0, 2.5, and 5 degrees and angles of attack of 0 and 5 degrees are provided.

Management of first-cycle wastes from the Bismuth Phosphate Plant using Nickel Ferrocyanide scavenging is described.

Abstract: "From neutron-yield measurements made with a MnSO4 detecting solution, the average number of neutrons produced per inelastic event is determined for a series of elements from lithium to uranium for 340-Mev protons, 190-and 315-Mev deuterons, 490-Mev He3 ions, and 90- and 160-Mev neutrons. The results are analyzed in an attempt to understand the total yield measurements for thick targets and to explain the variation of yield with the atomic number of the target."

Report that summarizes unreported neutron-yield data for the MnSO₄ tank method. Other yield measurements had been reported in other quarterly reports prior to the completion of this one.

Abstract: Data are presented to show that no appreciable loss of uranium occurs when uranium-bearing carbonaceous materials undergo oxidative ashing under routine conditions and with routine care.