The purpose of this dissertation is to investigate the thermodynamic properties of nonelectrolyte solutes dissolved in ternary solvent mixtures, and to develop mathematical expressions for predicting and describing that behavior in the solvent mixtures. Thirty-four ternary solvent systems were studied containing either alcohol (1-propanol, 2-propanol, 1-butanol, and 2-butanol), alkane (cyclohexane, heptane, and 2,2,4-trimethylpentane) or alkoxyalcohol (2-ethoxyethanol and 2-butoxyethanol) cosolvents. Approximately 2500 experimental measurements were performed. Expressions were derived from the Combined Nearly Ideal Multiple Solvent (NIMS)/Redlich-Kister, the Combined Nearly Ideal Multiple Solvent (NIMS)/Bertrand, Acree and Burchfield (BAB) and the Modified Wilson models for predicting solute solubility in ternary solvent (or even higher multicomponent) mixtures based upon the model constants calculated from solubility data in sub-binary solvents. Average percent deviation between predicted and observed values were less than 2%, documenting that these models provide a fairly accurate description of the thermodynamic properties of nonelectrolyte solutions. Moreover, the models can be used for solubility prediction in solvent mixtures in order to find the optimum solvent composition for solubilization or desolubilization of a solute. From a computational standpoint, the Combined Nearly Ideal Multiple Solvent/Redlich-Kister equation is preferred because the needed model constants can be calculated with a simple linear regressional analysis. Model constants …

The kinetics of ligand substitution for CO in Co4(CO)10(mu4-PPh2) , 1, have been investigated for the ligands P(OMe)3, P(OEt)3, PPh2H, P(0-i-Pr)3, P(n-Bu)3, PPh3, P(i-Pr)3, and PCy3 over a wide temperature range.

The characteristics of seventy-six calix[4]arene crystal structures derived from the Cambridge Crystallographic Database are presented. This survey is a discussion of the inter and intramolecular effects on the solid state cavity shape and molecular recognition ability of the compounds. In addition to this survey, four new calix[4]arene crystal structures are presented. The conformational characteristics of these four calixarenes are determined by a complicated array of inter and intramolecular interactions in the crystal packing.

In an effort to determine if there is a specific conformational structure which is most effective at the appropriate active physiological site, the synthesis of a group of sterically restricted analogs was undertaken. A portion of the polymethylene carbon skeleton of glutaric acid was replaced by selected aromatic carbons in benzenedicarboxylic acids to produce a series of ridged conformers, and the relative plant growth regulating properties of these derivatives were determined.

A novel crown ether precursor was developed in which a rigid 4-oxahexacyclo (5.4.1.26.3,10.05,9.08,11) dodecyl cage moiety ("cage functionality") was incorporated.

A group of azabiphenyl complexes and supramolecules, and their reduced and oxidized forms when possible, were characterized by cyclic voltammetry and electronic absorption spectroscopy. The oxidized and reduced species, if sufficiently stable, were further generated electrochemically inside a specially designed quartz cell with optically transparent electrode, so that the spectra of the electrochemically generated species could be taken in situ. Assignments were proposed for both parent and product electronic spectra. Species investigated included a range of Ru(II) and Pt(II) complexes, as well as catenanes and their comparents. Using the localized electronic model, the electrochemical reduction can be in most cases assigned as azabiphenyl-based, and the oxidation as transition metal-based. This is consistent with the fact that the azabiphenyl compounds have a low lying π* orbital. The electronic absorption spectra of the compounds under study are mainly composed of π —> π* bands with, in some cases, charge transfer bands also.

Problems presented in this paper concern the chemical equilibrium of methyl alcohol, formic acid, and methyl formate when combined.

Two aluminum spherical mirrors with radii of 203.2 mm and radii of curvature also of 203.2 mm have been used to construct a tunable Fabry-Perót type resonator operational at frequencies as low as 500 MHz. The resonator has been incorporated into a pulsed nozzle, Fourier transform, Balle-Flygare spectrometer. The spectrometer is of use in recording low J transitions of large asymmetric molecules where the spectra are often greatly simplified compared to higher frequency regions. The resonators use is illustrated by recording the rotational spectra of bromobenzene and iodobenzene. In related experiments, using similar equipment, the pure rotational spectra of four isotopomers of SrS and all three naturally occurring isotopomers of the actinide-containing compound thorium monoxide have been recorded between 6 and 26 GHz. The data have been thoroughly analyzed to produce information pertaining to bond lengths and electronic structures.

Waste-to-energy has become an attractive alternative to landfills. One concern in this development is the release of pollutants in the combustion process. The binder enhanced d-RDF pellets satisfy the requirements of environmental acceptance, chemical/biological stability, and being storeable. The acid gas emissions of combusting d-RDF pellets with sulfur-rich coal were analyzed by ion chromatography and decreased when d-RDF pellets were utilized. The results imply the possibility of using d-RDF pellets to substitute for sulfur-rich coal as fuel, and also substantiate the effectiveness of a binder, calcium hydroxide, in decreasing emissions of SOx. In order to perform the analysis of the combustion sample, sampling and sample pretreatment methods prior to the IC analysis and the first derivative detection mode in IC are investigated as well. At least two trapping reagents are necessary for collecting acid gases: one for hydrogen halides, and the other for NOx and SOx. Factors affecting the absorption of acid gases are studied, and the strength of an oxidizing agent is the main factor affecting the collection of NOx and SOx. The absorption preference series of acid gases are determined and the absorption models of acid gases in trapping reagents are derived from the analytical results. To prevent …

High Performance Liquid Chromatography (HPLC) was used to investigate the utility of this technique for the analytical and preparative separation of components of aquatic fulvic acids (FA). Three modes of HPLC namely adsorption, anion exchange and reversed phase were evaluated. Aquatic fulvic acids were either extracted from surface water and sediment samples collected from the Southwest of the U.S., or were provided in a high purity form from the USGS. On the adsorption mode, a major fraction of aquatic fulvic acid was isolated on a semipreparative scale and subjected to Carbon-13 NMR and FAB Mass Spectroscopy. Results indicated that (1) The analyzed fraction of fulvic acid contains more aliphatic than aromatic moieties; (2) Methoxy, carboxylic acids, and esters are well-defined moieties of the macromolecule; (3) Phenolic components of the macromolecules were not detected in the Carbon-13 NMR spectrum possibly because of the presence of stable free radicals. Results of the anion exchange mode have shown that at least three types of acidic functionalities in aquatic fulvic acid can be separated. Results also indicated that aquatic fulvic acid can be progressively fractionated by using subsequent modes of HPLC. Results of reversed phase mode have shown that (1) The fractionation of aquatic …

Flash photolysis techniques were applied to studies of solvent displacement by Lewis bases (L) from solvated metal carbonyl complexes of Cr, Mo, and W. On the basis of extensive studies of the reaction rate laws, activation parameters , and linear-free-energy-relationships, it was concluded that the mechanisms of solvent displacement reactions depend on the electronic and steric properties of the solvents and L, as well as the identities of the metal atoms. The strengths of solvent-metal bonding interactions, varying from ca. 7 to 16 kcal/mol, and the bonding "modes" of solvents to metals are sensitive to the structures of the solvent molecules and the identities of the metal centers. The results indicate dissociative desolvation pathways for many arene solvents in (solvent)Cr(CO)_5 (solvent = benzene, fluorobenzene, toluene, etc.) complexes, and are consistent with competitive interchange and dissociative pathways for (n-heptane)M(CO)_5. Different types of (arene)-Cr(CO)_5 interactions were suggested for chlorobenzene (CB) vs. fluorobenzene and other non-halogenated arenes, i.e. via σ-halogen-Cr bond formation in the CB solvate vs. π-arene-Cr bond formation through "isolated" double bonds in solvates of the other arenes. The data also indicate the increasing importance of interchange pathways for solvent displacement from the solvates of Mo and W vs. that of …

This study deals with the (4+2)-cycloaddition reactions of 4-π electron compounds with ketenes. Chloroketenes were generated in situ from the corresponding chlorinated acid chlorides in the presence of the ketenophiles. Chloro-, dichloro- and diphenylketenes reacted with 1-methoxy-3-trimethylsiloxy-l,3-butadiene, and 2,4-bis(trimethylsiloxy)-1,3-pentadiene to yield the corresponding dihydropyrans. The dihydropyrans yielded substituted 4-pyranones on hydrolysis.

The reactions of tert-butyl-, sec-butyl-, and n-butyllithium with dimethylfluorovinylsilane include addition to the double bond to give both silene and silenoid intermediates, fluorine substitution, and a novel vinyl substitution. For the tert-butyllithium reaction, product stereochemistry and trapping experiments using both cyclopentadiene and methoxytrimethylsilane show that silenes are not formed in THF. In hexane about 67% of the 1,3-disilacyclobutanes obtained arise from silene dimerization while 33% are formed by silenoid coupling. In hexane the order of reactivity for addition, t-Bu > sec-Bu > n-Bu, is opposite that for fluorine substitution. The vinyl substitution is most significant with secondary alkyllithium reagents including the tert-butyllithium adduct to dimethylfluorovinylsilane and with sec-butyllithium itself. Evidence for the formation of vinyllithium or ethylene in the process could not be obtained.

A study has been conducted for the qualitative and Quantitative analysis of chlorinated organic compounds in water. The study included the adaptation of Amberlite XAD macroreticular resin techniques for the concentration of municipal wastewater samples, followed by GC/MS analysis. A new analytical method was developed for the determination of volatile halogenated organics using liquid-liquid extraction and electron capture gas chromatography. And, a computer program was written which searches raw GC/MS computer files for halogen-containing organic compounds.

Evidence is presented that apparent silene products obtained from the metalation of cyclopentadienyldimethyl - chlorosilane either with tert-butyl1ithium or with methylenetriphenylphosphorane actually arise from the metalated starting material, a silenoid, rather than from a silafulvene intermediate. Trimethylmethoxysi1ane is shown to be an effective trap for dimethylsilafulvene. A new dimethylsilafulvene precursor, bis(dimethylmethoxysi1yl) cyclopentadiene, which gives high yields of dimethyldimethoxysi1ane and the silafulvene at temperatures as low as 240°C is reported.

This thesis explores the Hicoria genus and focuses on the Stuart variety of pecan tree. Experimentation yielded the ash constituents, fats, fat constants, crude fiber, protein, and sugar in shelled pecan samples.

This thesis explores the seperation of isomeric paraffins in organic chemistry and how the resulting mixture of hydrocarbons might be examined.

Ketene dimethyl thioacetal monosulfoxide was prepared in 68% overall yield in two steps starting from methylmagnesium chloride. The yield of dithioacetic acid was improved significantly by employing tetrahydrofuran as solvent and using elevated temperatures. A one-pot synthesis of ketene thioacetals from alkyl halides was developed and several ketene thioacetals were prepared by this method. Direct oxidation of ketene thioacetals using m-chloroperoxybenzoic acid provided a general route to ketene thioacetal monosulfoxides. In cases where E and Z isomeric ketene thioacetal monosulfoxides were possible, the E/Z isomeric ratio increased as the substituents on the ketene double bond was increased in size.

The reaction of tert-butyllithium with chloromethylphenylvinylsilane at low temperatures in hexane gave a 48% yield of a mixture of the five isomers of 1,3-dimethyl-1,3-diphenyl-2,4-dineopentyl-1,3-disilacyclobutane, formed by the head-to-tail dimerization of both E- and Z-1-methyl-1-phenyl-2-neopentylsilenes, along with an acyclic dimer. These were separated and their stereochemistry was established by ('1)H- and ('13)C-NMR spectroscopy. The E- and Z-silenes were also trapped as their {4 + 2} cycloadducts with cyclopentadiene, 2,3-dimethyl-1,3-butadiene and anthracene, which also were separated and stereochemically characterized. A consistent mole ratio of 70:30 for the E- and Z-silene adducts is interpreted as evidence for stereochemical induction in the silene generation reaction. It is also suggested that the dimerization of the silenes to give the 1,3-disilacyclobutanes occurs by a nonstereospecific stepwise pathway. When E- or Z-1-methyl-1-phenyl-2-neopentylsilene was generated by the retro-Diels-Alder flow vacuum thermolysis of its corresponding cyclopentadiene or anthracene adduct at temperatures between 400 and 600(DEGREES)C and then trapped with 2,3-dimethyl-1,3-butadiene, the stereochemical distribution of the products is independent of the stereochemistry of the silene precursor, indicating that the silene is not configurationally stable towards cis-trans isomerization at these temperatures. Evidence that the intermolecular ene reaction and the {4 + 2} cycloaddition which occur with 2,3-dimethyl-1,3-butadiene are concerted is presented. …

The objective of this study was to develop new synthetical routes to natural and industrial products utilizing ketene cycioaddition reactions. The cycioaddition of diphenylketene with α,β-unsaturated imines yields (2+2) cycioaddition products, g-lactams. However, electron donating groups, such as dimethylamine, in the 4-position of the α,β-unsaturated imines result in (4+2) cycloaddition products, ∂-lactams. Dichloroketene reacted with α,β-unsaturated imines to yield (4+2) cycloaddition products, g-lactams. Large substituents in the 4-position of a, ^-unsaturated imines resulted in a (2+2) cycioaddition product, β-lactam. The ∂-lactams derived from dichloroketene are easily dehydrochlorinated to the corresponding 2-pyridornes.

A new synthetic route to natural and novel pyrethroid acids was developed utilizing ketene cycloaddition which is a significant improvement over existing syntheses. The newly synthesized pyrethroid acids were converted to pyrethroid esters and used to study structure-activity relationships. The cycloaddition of dichloroketene with 2,5-dimethyl-2,4-hexadiene yields (2+2) cycloaddition products, 2,2-dichlorocyclobutanones. The reductive removal of one chlorine atom from these cycloaddition products gave monochlorocyclobutanones which underwent a Favorskii-type ring contraction to yield cis- and trans-chrysanthemic acids. 4-Methyl-1,3-pentadiene was also used as a precursor in this synthetic scheme to yield an analogue of the chrysanthemic acid. These results are consistent with a concerted cycloaddition process involving a dipolar transition state. The zinc reduction is not a regiospecific reaction which accounts for the two regioisomers of the monochlorocyclobutanones. The Favorskii-type ring contraction is a regiospecific reaction. A variety of different bicyclo(3.1.0)alkenecarboxylates and bicyclo(4.1.0)heptenecarboxylates were synthesized from alkylcyclopentadiene and fulvene derivatives. These new bicyclo pyrethroid acids are structurally similar to the natural chrysanthemic acid but are rigid and locked in a single conformation which is likely the least stable conformer of the natural acid. The acids were converted to pyrethroid esters and tested against the housefly and cockroach. The test results indicate that the …

The calcination of calcium carbonate in a cement or a lime kiln uses approximately two to four times the theoretical quantity of energy predicted from thermodynamic calculation depending upon the type of the kiln used (1.4 x 10^6 Btu/ton theoretical to 6 x 10^6 Btu/ton actual). The objective of this research was to attempt to reduce the energy required for the calcination by 1. decreasing the calcination temperature of calcium carbonate, and/or 2. increasing the rate of calcination at a specific temperature. Assuming a catalytic enhancement of 20 percent in the industrial applications, an energy savings of 300 million dollars annually in the United States could be reached in the cement and lime industries. Three classes of compounds to date have shown a positive catalytic effect on the calcination of calcium carbonate. These include alkali halides, phospho- and silico-molybdate complexes, and the fused carbonates system.

The kinetics and mechanism of the reactions of (tmpa)W-(CO)^ and (tmen)W(CO)^ (tmpa = N,N,N',N'-tetramethy1-1,3-diaminopropane and tmen = N,N,N1,N1-tetramethylethylenediamine) with four phosphorus donor ligands (triisopropyl phosphite, triphenyl phosphite, triphenylphosphine and "constrained phosphite", 4-methyl-2,6,7-trioxa-l-phosphabicylo[2.2.2]octane) in xylene have been investigated in detail. These reactions were found to take place by the ring-opening of the bidentate ligand in a reversible step which leads to the formation of a five-coordinate intermediate of the type [(h^-tmpa)W(CO)or [(h^-tmen)W(CO). The intermediate then reacts with one molecule of phosphorus ligand, L, to form a six-coordinate intermediate, which can either expel the bidentate ligand and react with another molecule of L leading to the formation of a new disubstituted tungsten tetracarbonyl or go through a ring-reclosure step to form a seven-coordinate activated com-2 2plex or intermediate of the type [(h -tmpa)W(CO)^(L)] or [(h - tmen)W(CO)^(L)] which then regenerates the substrate through the expulstion of the L molecule. This mechanism is consistent with the observed rate behavior in these systems. For the reaction of (tmpa)W(CO)^ with the "constrained phosphite", an intermediate of the type [(h1-tmpa)W(CO)4P(OCH2)3CCH3] was isolated and identified.

Raman vibrational bands are sensitive to fluctuations in the molecular environment. Variations in the bandwidth and peak position can then be utilized to monitor molecular forces and interactions present in condense phases. Nuclear Magnetic Resonance (NMR) provides a convenient probe for the study of molecular reorientation in liquids since nuclear spin relaxation times are dependent on the details of molecular motion. Presented here is the solvent study of the Raman bandwidths and frequency displacements of the mode of the compounds CH3MCI3 (M = C, Si, Ge, Sn) in a number of solvents of widely varying molecular structure. Also, a detailed isotope dilution study of the modes in CH2CI2/CD2CI2 mixtures is presented. In this set of experiments, I observed broadening of the v1 mode of CH2C12 upon dilution,which is the first experimental observation of such behavior. The temperature-dependent carbon-13 relaxation times and nuclear Overhauser enhancements in neat dichloromethane were measured. In this study we found that the molecular reorientation of this molecule was highly anisotropic, but could be well characterized assuming quasi-symmetric top behavior. In addition, in order to gain a more complete understanding of the reorientational dynamics in dichloromethane, we analyzed the 13-C NMR relaxation of CH2CI2 both in "inert" …