The following report is based on work performed under the auspices of the U.S. Atomic Energy Commission. The purpose of this report is to describe an air-core strong focusing synchrotron and its functions.

From introduction:"It was the aim of this investigation to determine the resistance of several materials of construction to current and anticipated and anticipated Hanford separation process waste streams under specific conditions. The corrosion rates of mild steel and austenitic stainless steel and the resistance of several commercial protective coatings were established."

A fifth in-pile loop experiment, L-4-8, was completed. The loop operated in-pile for a total of 1637 hr, during which time the LITR energy output was 4377 Mwhr. The average fission power in the loop based o cesium analyses was 622 w when the LITR was at full power (3 Mw). Based on oxygen data, the generalized corrosion rate for the first 300 hr was 4.0 mpy; the rate for the remaining 1357 hr was 0.7 mpy. The nickel data gave parallel results. The corrosion of the type 347 stainless steel, Zircaloy-2, and Ti-55AX [unintelligible] exposed in the core and in in-line holders was generally consistent with that observed in previous in-pile loop experiments. Some differences with steel were attributed to the fact that this was the first loop containing steel specimens operated with 0.04 m H2SO4 present in the uranyl sulfate charge solution (0.17 m UO2SO4, 0.03 m CuSO4). Stress specimens, made from the alloys Zircaloy-2, type 17-4 PH stainless steel, and Ti-C-130-AM, were exposed in care, in-line, and pressurizer locations. Microscopic examination and average weight loss gave no indication of effects attributable to the stressed condition of the specimens.

Technical report. From Abstract : "The reactions of VCl2. VCl3, and VCl3-VBr3 mixtures with bromine vapor at 350 to 450°C led to vaporization of the halides and deposition of mixed halides of vanadium (III) at lower temperatures."

Technical report. From Abstract : "The thallium-rich region of the thallium-indium phase diagram was determined from atmospheric pressure to 5.5 kbars primary from electrical resistivity data obtained as a function of composition, temperature, and pressure."

Technical report. From Abstract : "The equilibria (1) VBr3(s) = VBr2(s) + 1/2Br2(g) and (2) 2VBr3(s) = VBr2(s) + VBr4(g) were studied over the range 644 to 805°K by transpiration in helium."

Technical report. From Abstract : "The vapor pressures of crystalline VCl2, VBr2, VCl3 and VBr3 have been measured by the Knudsen effusion method using pyrex and Vycor effusion cells. ... During the measurements on VCl3 and VBr3 dissociation and disproportionation of the samples occurred simultaneously with the simple vaporization. However, because the product of each of these processes was collected separately during an experiment, the vapor pressure due to sublimation was obtained without difficulty."

A general method is suggested for analyzing the scattering of particle A by particle B, leading to three or more final particles, in order to obtain the cross section for the interaction of A with a particle which is virtually contained in B. Binding complications are absent if a plausible assumption about the location and residues of poles in the S-matrix is accepted. The method is useful for unstable particles from which free targets cannot be made; the special examples of pion and neutron targets are discussed in detail.

A partial bibliography of reports on the Fluorox moving-bed for producing UO3, UF4, and UF6 is given.