Serial/Series Title
Country
Counties
16 Matching Results
Results open in a new window/tab.
Results:
1 - 16 of
16
Preshot and Postshot Safety Survey of Oil and Gas Facilities, Baxterville Field, Mississippi, Final Report
From introduction: Oil and gas wells and related facilities of the Baxterville field were surveyed to document any physical changes resulting from the Salmon Event. All such structures within a 5-mile radius of Ground Zero were examined and photographed in detail.
Date:
August 5, 1965
Creator:
Ward, Don C.
System:
The UNT Digital Library
Effect of Carburization on the Low Strain Rate Behavior of Type 304 Stainless Steel: Interim Report
Abstract: Pressure stress-rupture specimens of thin walled Type 304 stainless steel tubing have been tested at temperatures to 1300°F in the presence of an internal diffusion limited carbon source.
Date:
August 31, 1965
Creator:
Stone, D. H. & Schwartz, A. D.
System:
The UNT Digital Library
Development, Acceptance and Qualification Testing of the SNAP 10A Ejectable Heat Shield
From abstract: The development, acceptance, and qualification tests performed on the SNAP-10A Ejectable Heat Shield and components, the results of those tests, and the conclusions drawn from the results are presented in this report.
Date:
August 31, 1965
Creator:
Sperow, H. L.
System:
The UNT Digital Library
U-10 Wt % Mo Fuel Element: Irradiation in SRE
From abstract: The fuel element assembly was successfully irradiated in the SRE to a maximum burnup of 5300 Mwd/MTU, at a peak fission rate of approximately 1.5 x 10E13 fissions/cm3-sec and a maximum central temperature near 1200F.
Date:
August 31, 1965
Creator:
Arnold, J. L.; Miller, K. J. & Peterson, R. M.
System:
The UNT Digital Library
The High-Temperature Irradiation Behavior of Hypostoichiometric Uranium Monocarbide
From abstract: A series of three multi-compartmented experiments was designed to investigate the irradiation behavior uranium carbide fuels, as a function of composition, temperature, and burn-up; and the mechanical properties of Type 304 stainless steel, as a function of temperature and integrated thermal neutron flux.
Date:
August 31, 1965
Creator:
Hahn, R. D.
System:
The UNT Digital Library
Engineering Properties of Nuclear Craters, Report 3: Review and Analysis of Available Information on Slopes Excavated in Weak Shales
This report provides information about slope stability problems which will arise if a new canal is excavated through the types of weak shale encountered along the present Panama Canal. It includes a discussion about the general problem and possible approaches, a review of previous experience, and a description of the new study.
Date:
August 1965
Creator:
Hirschfeld, R. C.; Whitman, Robert V. & Wolfskill, Lyle Anthony
System:
The UNT Digital Library
Project Dugout: Apparent Crater Studies
From abstract: This report analyzes the dimensions and geometry of the Dugout crater, produced by the detonation of a row of five 18,144 kg nitromethane charges in basalt, were analyzed.
Date:
August 3, 1965
Creator:
Spruill, Joseph L.
System:
The UNT Digital Library
Close-in Air Blast from a Row Charge in Basalt
From abstract: Close-in air blast measurements were made on the Dugout shot. Major constituents of the blast wave were the ground-shock-induced pulse and the pulse from venting gases. The ground-shock-induced pulse was the dominant one at all stations.
Date:
August 4, 1965
Creator:
Vortman, Luke J.
System:
The UNT Digital Library
Project Sulky: Preshot Geologic Investigations
From abstract: A comprehensive geologic and engineering investigation was undertaken at the site on Buckboard Mesa selected for the SULKY event, a nuclear cratering experiment, conducted in dry basalt.
Date:
August 4, 1965
Creator:
Nugent, R. C. & Banks, D. C.
System:
The UNT Digital Library
SRE Heat Transfer System Demolition
From introduction: This report details the extensive modifications to the SRE heat transfer systems required to accomplish increased capacity objectives.
Date:
August 31, 1965
Creator:
Nicholson, J. O.
System:
The UNT Digital Library
Analytical Methods in Mass Spectrometry
Report discussing analysis of methods, where new methods were created to solve specific problems as it relates to mass spectrometry.
Date:
August 1965
Creator:
Sharkey, A. G., Jr.; Shultz, J. L. & Friedel, R. A.
System:
The UNT Digital Library
Thermodynamic and Related Properties of Parahydrogen From the Triple Point to 100 K at Pressures to 340 Atmospheres
From Introduction: "In the present report, therefore, polynomials representing isotherms and isochores are combined with numerical methods of computation for the purpose of improving accuracy, in particular for the derivatives of the P-p-T surface."
Date:
August 10, 1965
Creator:
Roder, H. M.; Weber, L. A. & Goodwin, R. D.
System:
The UNT Digital Library
The HASL Bone Program 1961-1964
Report documenting the measuring of strontium-90 levels contained in the bones of children and adults of various age brackets across the United States.
Date:
August 16, 1965
Creator:
Rivera, Joseph & Harley, John H.
System:
The UNT Digital Library
Self-Sustained Hydrodynamic Oscillations in a Natural Circulation Two-Phase-Flow Boiling Loop
Analysis of a class of steady magnetohydrodynamic channel flow problems when natural, as well as forced, convection is important.
Date:
August 1965
Creator:
Jain, Kamal C.
System:
The UNT Digital Library
U.S. Reactor Containment Technology: a Compilation of Current Practice in Analysis, Design, Construction, Test, and Operation, Volume 1
First volume of a compilation of information about reactor containment, written by experts from a variety of organizations.
Date:
August 1965
Creator:
Cottrell, William B. & Savolainen, A. W.
System:
The UNT Digital Library
Microwave Impedance Measurements and Standards
Report presenting a survey and discussion of well-known microwave impedance measurement techniques. The discussion includes an introduction which emphasizes basic concepts and reflection coefficient-voltage standing-wave ratio relationships. Sources of error in the various measurement techniques are discussed and methods to reduce errors are presented. Methods using rotating loops and resonance lines are included and a brief discussion of microwave impedance standards is given.
Date:
August 12, 1965
Creator:
Beatty, Robert W.
System:
The UNT Digital Library