Circular presenting a description of the Breguet 390 T, which is a three-engine all-metal transport sesquiplane with the same structural principles as the Breguet military airplane. This aircraft design replaces a girder fuselage with an orthodox rectangular fuselage with accommodations for ten passengers and baggage. Details of the design, components, flying qualities, drawings, and photographs are provided.

In order to clarify the viscosity effect some experiments were made in the Gottigen low-pressure tunnel with the Bruhn double-throat Venturi tube. This type of tunnel makes it possible to vary the pressure and thereby the density within wide limits and consequently, to examine the viscosity effect. This, however, did not impair the results because pressure and temperature were determined at different periods.

Tests of nine symmetrical airfoils, having different leading-edge radii, were made in the variable density wind tunnel. Three symmetrical NACA airfoils having maximum thickness-to-chord ratio of 0.06, 0.012, and 0.018 were used as basic (or normal) sections; and for each of these thicknesses one thinner and one blunter nose section were developed. Although the slope of the lift curve varies with thickness, these tests show that for any given thickness the slope is independent of nose radius.

This note presents the results of flight pressure-distribution tests on the right upper wing panel of a Douglas M-3 airplane equipped with a modified elliptical tip having a slight amount of washout. The results are given in tables and curves in such form that the load distribution for any normal force coefficient within the usual range encountered in flight may be determined.

"An investigation was made of the aerodynamic effects of reflexing the trailing edge of three commonly used airfoils. Six airfoils were used in the investigation: three having the normal profiles of the Navy 60, the Boeing 106, and the Gottingen 398, and three having these profiles modified to obtain a reflexed trailing edge with the mean camber line changed to give Cmc/4=0. The tests were conducted at a value of the Reynolds Number of approximately 3,100,000 in the variable density wind tunnel of the National Advisory Committee for Aeronautics. Measurements of lift, drag, and pitching moment were made on each of the six airfoils" (p. 1).

This report discusses in detail the results obtained with devices for preventing the separation of the boundary layer. In order to give an idea of the order of magnitude of the positive and negative pressures involved, we made a diagram of them, as measured at 15 degrees angle of attack on the Gottigen profile 387. The pressure scale is graduated in terms of the dynamic pressure q, which enables the evaluation of the positive and negative pressures at all velocities.

This report presents the results of the first investigation of the physical principle of preventing the streamline separation by removing the boundary layer. It was aeronautical, in that it dealt with airfoils, but the results are of a very general application.

Circular describing the Avro 627 Hailplane, which is a single-seat biplane designed for delivering air mail. Details regarding the fuselage, wings, tail, landing gear, power installation, characteristics, performance, drawings, and photographs are provided.

"This report describes the apparatus as designed and constructed at the Langley Memorial Aeronautical Laboratory, for studying the formation and combustion of fuel sprays under conditions closely simulating those occurring in a high-speed compression-ignition engine. The apparatus consists of a single-cylinder modified test engine, a fuel-injection system so designed that a single charge of fuel can be injected into the combustion chamber of the engine, an electric driving motor, and a high-speed photographic apparatus. The cylinder head of the engine has a vertical-disk form of combustion chamber whose sides are glass windows" (p. 549).

"High-speed motion pictures were taken of individual fuel sprays from a pump injection system. The changes in the spray-tip penetration with changes in the pump speed, injection-valve opening and closing pressures, discharge-orifice area, injection-tube length and diameter, and pump throttle setting were measured. The pump was used with and without a check valve" (p. 241).

This investigation was conducted to obtain quantitative information on the effectiveness of three landing gears for the NY-2 (consolidated training) airplane. The investigation consisted of static, drop, and flight tests on landing gears of the oleo-rubber-disk and the mercury rubber-chord types, and flight tests only on a landing gear of the conventional split-axle rubber-cord type. The results show that the oleo gear is the most effective of the three landing gears in minimizing impact forces and in dissipating the energy taken.

This investigation, which was made in the small wind tunnel having a diameter of 1.2 m (3.94 feet), embraced three wing models, behind which, at various angles of attack between 0 and 60 degrees, the static pressure and the total pressure along vertical lines (perpendicular to the direction of the undisturbed wind and to the wing span) were measured. The location of these vertical lines are indicated in Figure 1. Moreover, the wing polars were determined by the customary three-component measurements. For testing the pressure field, a Pitot tube and a static probe, both of 2 mm (0.08 in.) in diameter, were mounted 40 mm (1.57 in.) apart on the end of a shaft 1 m (39.37 in.) long.