Rising energy prices and climate change are central issues in the debate about our nation's energy policy. Many are demanding increased energy efficiency as a way to help reduce greenhouse gas emissions and lower the total cost of electricity and energy services for consumers and businesses. Yet, as the National Action Plan on Energy Efficiency (NAPEE) pointed out, many utilities continue to shy away from seriously expanding their energy efficiency program offerings because they claim there is insufficient profit-motivation, or even a financial disincentive, when compared to supply-side investments. With the recent introduction of Duke Energy's Save-a-Watt incentive mechanism and ongoing discussions about decoupling, regulators and policymakers are now faced with an expanded and diverse landscape of financial incentive mechanisms, Determining the 'right' way forward to promote deep and sustainable demand side resource programs is challenging. Due to the renaissance that energy efficiency is currently experiencing, many want to better understand the tradeoffs in stakeholder benefits between these alternative incentive structures before aggressively embarking on a path for which course corrections can be time-consuming and costly. Using a prototypical Southwest utility and a publicly available financial model, we show how various stakeholders (e.g. shareholders, ratepayers, etc.) are affected by these …

Thermal and its resulting mechanical stress due to quenches inside the Epoxy impregnated Nb{sub 3}Sn high field magnets are studied with a combination of a quench simulation program, and ANSYS program. We use the geometry of the high field cosine theta type dipole magnets with one meter and 10 meter length. The turns, where quenches started, are excessively heated up, up to 100 K to 300 K, depending on the coil length and time delay. The non quenching turns and surrounding material are not heated substantially. This elevated temperature and its gradient cause the excessive local stress in the quenching conductors and their insulation material. The stress and strain in the conductor as well as in the insulation become excessive, and they are studied using the ANSYS stress analysis.

None

The Phase II upgrade to the LHC collimation system calls for complementing the 30 high robust Phase I graphite collimators with 30 high Z Phase II collimators. One option is to use metallic rotatable collimators and this design will be discussed here. The Phase II collimators must be robust in various operating conditions and accident scenarios. Design issues include: (1) Collimator jaw deflection due to heating and sagitta must be small when operated in the steady state condition, (2) Collimator jaws must withstand transitory periods of high beam impaction with no permanent damage, (3) Jaws must recover from accident scenario where up to 8 full intensity beam pulses impact on the jaw surface and (4) The beam impedance contribution due to the collimators must be small to minimize coherent beam instabilities. This paper reports on recent updates to the design and testing.

None

We argue that deeply virtual Compton scattering will display Regge behavior {nu}{sub R}{sup {alpha}}(t) at high energy at fixed-t, even at high photon virtuality, not necessarily conventional scaling. A way to see this is to track the Reggeon contributions to quark-nucleon scattering and notice that the resulting Generalized Parton Distributions would have divergent behavior at the break-points. In addition, we show that the direct two-photon to quark coupling will be accessible at large t where it dominates the DVCS amplitude for large energies. This contribution, the J = 0 fixed-pole, should be part of the future DVCS experimental programs at Jlab or LHeC.

The determination of regional attenuation Q{sup -1} can depend upon the analysis method employed. The discrepancies between methods are due to differing parameterizations (e.g., geometrical spreading rates), employed datasets (e.g., choice of path lengths and sources), and the methodologies themselves (e.g., measurement in the frequency or time domain). Here we apply five different attenuation methodologies to a Northern California dataset. The methods are: (1) coda normalization (CN), (2) two-station (TS), (3) reverse two-station (RTS), (4) source-pair/receiver-pair (SPRP), and (5) coda-source normalization (CS). The methods are used to measure Q of the regional phase, Lg (Q{sub Lg}), and its power-law dependence on frequency of the form Q{sub 0}f{sup {eta}} with controlled parameterization in the well-studied region of Northern California using a high-quality dataset from the Berkeley Digital Seismic Network. We investigate the difference in power-law Q calculated among the methods by focusing on the San Francisco Bay Area, where knowledge of attenuation is an important part of seismic hazard mitigation. This approximately homogeneous subset of our data lies in a small region along the Franciscan block. All methods return similar power-law parameters, though the range of the joint 95% confidence regions is large (Q{sub 0} = 85 {+-} 40; {eta} = …

Two of the three types of MICE magnets will have splices within their coils. The MICE coupling coils may have as many as fifteen one-meter long splices within them. Each of the MICE focusing coils may have a couple of 0.25-meter long conductor splices. Equations for the calculation of resistance of soldered lap splices of various types are presented. This paper presents resistance measurements of soldered lap splices of various lengths. Measured splice resistance is shown for one-meter long splices as a function of the fabrication method. Another important consideration is the strength of the splices. The measured breaking stress of splices of various lengths is presented in this paper. Tin-lead solders and tin-silver solders were used for the splices that were tested. From the data given in this report, the authors recommend that the use of lead free solders be avoided for low temperature coils.

Off-line conditioning of full-size optics for the National Ignition Facility required a beam delivery system to allow conditioning lasers to rapidly raster scan samples while achieving several technical goals. The main purpose of the optical system designed was to reconstruct at the sample plane the flat beam profile found at the laser aperture with significant reductions in beam wander to improve scan times. Another design goal was the ability to vary the beam size at the sample to scan at different fluences while utilizing all of the laser power and minimizing processing time. An optical solution was developed using commercial off-the-shelf lenses. The system incorporates a six meter relay telescope and two sets of focusing optics. The spacing of the focusing optics is changed to allow the fluence on the sample to vary from 2 to 14 Joules per square centimeter in discrete steps. More importantly, these optics use the special properties of image relaying to image the aperture plane onto the sample to form a pupil relay with a beam profile corresponding almost exactly to the flat profile found at the aperture. A flat beam profile speeds scanning by providing a uniform intensity across a larger area on the …

This article presents the scholarly articles that were written after the 2017 EDUsummIT, based on discussions within the Thematic Working Groups during the meeting itself. The article also present the Call to Action that was consolidated from the closing statements of the nine EDUsummIT 2017 Thematic Working Groups.

Article on the role of hypoxia in the evolution and development of the cardiovascular system.

We present searches for the rare decay modes D{sup 0} {yields} e{sup +}e{sup -}, D{sup 0} {yields} {mu}{sup +}{mu}{sup -}, and D{sup 0} {yields} e{sup {+-}}{mu}{sup {-+}} in continuum e{sup +}e{sup -} {yields} c{bar c} events recorded by the BABAR detector in a data sample that corresponds to an integrated luminosity of 468 fb{sup -1}. These decays are highly GIM suppressed but may be enhanced in several extensions of the Standard Model. Our observed event yields are consistent with the expected backgrounds. An excess is seen in the D{sup 0} {yields} {mu}{sup +}{mu}{sup -} channel, although the observed yield is consistent with an upward background fluctuation at the 5% level. Using the Feldman-Cousins method, we set the following 90% confidence level intervals on the branching fractions: {Beta}(D{sup 0} {yields} e{sup +}e{sup -}) < 1.7 x 10{sup -7}, {Beta}(D{sup 0} {yields} {mu}{sup +}{mu}{sup -}) within [0.6, 8.1] x 10{sup -7}, and {Beta}(D{sup 0} {yields} e{sup {+-}}{mu}{sup {-+}}) < 3.3 x 10{sup -7}.

Simple methods for the cooling of the second crystals of cryogenically cooled undulator and wiggler double crystal monochromators are described. Copper braids between the first and second crystals are used to cool the second crystals of the double crystal monochromators. The method has proved successful for an undulator monochromator and we describe a design for a wiggler monochromator.

Experiments are being developed to shock compress metal foils in the solid state to study the material strength under high compression. The x-ray drive has been characterized and hydrodynamics experiments performed to study growth of the Rayleigh-Taylor (RT) instability in Al foils at a peak pressure of about 1.8 Mbar. Pre-imposed modulations with an initial wavelength of lo-50 pm, and amplitude of 0.5 pm show growth. Variation in the growth factors may be a result of shot-shot variation in preheating of the Al sample due to emission from the plasma in the hohlraum target

Superpolished optical flats with high spatial frequency roughness below 0.1 nm have been commercially available for years. However, it is much more difficult to obtain figured optics of similar quality. We have obtained and tested the finish of figured optics from different vendors by atomic force microscopy and optical profilometry and have investigated how the substrate quality can be improved by the deposition of thin films. We have determined the growth parameters of several thin-film structures. From these parameters we can determine how the surface topography of a coated mirror differs from that of the substrate, select the best thin-film structure, and predict the possible improvement. Keywords: Smoothing films, multilayer coatings, finish of mirror substrates

The requirements and design of a laser system to generate a sodium- layer beacon is presented. Early results of photometry and wavefront sensing are given.

None

If you assume as input axioms: (1) QCD is correct; and (2) the OZI rule is universal for weakly coupled glue in disconnected Zweig diagrams where the disconnection is due to the creation or annihilation of new flavor(s) of quark(s), then the BNL/CCNY g/sub T/(2010), g/sub T/'(2220) and g/sub T/(2360) observed in ..pi../sup -/p ..-->.. phi phi n are produced by 1-3 primary glueballs. One or two broad primary glueballs could in principle break down the OZI suppression and mix with one or two quark states which accidentally have the same quantum numbers and nearly the same mass. However the simplest explanation of the rather unusual characteristics of our data is that we have found a triplet of J/sup PC/ = 2/sup + +/ glueball states. Since our input axioms are in good agreement with experiments and merely represent modern QCD practice, we have very probably discovered 1-3 J/sup PC/ = 2/sup + +/ glueballs. The iota(1440) and the theta(1700) observed in J/psi radiative decay are glueball candidates. The pros and cons of which are discussed briefly here. 41 references.

Three basic core material types for sandwich structure applications are studied. The three two-dimensional pattern types are: honeycomb, triangular cells, and a new configuration involving star type cells. The specific critical properties of stiffness and strength type are identified and studied, both theoretically and experimentally.

AerMet 100 is a high strength, high fracture toughness alloy designed for use in aerospace applications. In previous work the welding behavior of this alloy has been evaluated, and it has been shown that a softened region in the heat-affected zone (HAZ) is a principal feature of the weld zone. A model for this softening, based on classical theories of precipitate coarsening and isothermal softening data, was developed and found to provide a reasonable description for weld thermal cycle simulation (Gleeble) experiments. Recent work has shown, however, that softening in real welds is not always well predicted by this model, so that additional effects, which are not captured in conventional Gleeble thermal cycle simulations must be addressed. In particular, the stresses associated with real weld HAZ's may modify the softening kinetics. In the current work, Gleeble simulations in both stress-free and stressed conditions have been conducted and the kinetics compared. The accuracy of the thermal model predictions have also been considered regarding their impact on estimated hardness values.

Structure within thin epoxy films is investigated by neutron reflectivity (NR) as a function of resin/crosslinker composition and cure temperature. Variation in the crosslink density normal to the substrate surface is examined by swelling the films with the good solvent d-nitrobenzene (d-NB). The principle observation is a large excess of d-NB near the air surface. This is not a wetting layer,but rather indicates a lower crosslink density in the new-surface region. This effect is due to preferential segregation of the crosslinker to the air surface, driven by the lower surface energy of the crosslinker relative to the epoxide oligamers. The magnitude of the effect is a function of composition and cure temperature. Exclusion of d-N13from the region immediately adjacent to the substrate surface is also observed, possibly indicating a tightly bound layer of epoxy. Regarding swelling in the bulk of the films, the behavior is non-symmetric with departure from the stoichiometric ratio. The films deficient in curing agent show greater equilibrium swelling and faster swelling kinetics than the films with an excess of curing agent.

Article describes a study in which a micro milling process was used to manufacture AISI 316L stainless steel needles arrays with a conical geometry (i.e., a base diameter and height of 1 mm by 1 mm, respectively), and an analysis of tool wear on ball nose micro end milling tools with a diameter of ~200 μm was performed to evaluate the use of lubricant in the manufacture of those conical surfaces.

Some energetic materials may explode at fairly low temperatures and the violence from thermal explosion may cause a significant damage. Thus it is important to understand the response of energetic materials to thermal insults for safe handling and storage of energetic materials. The One Dimensional Time to Explosion (ODTX) system at the Lawrence Livermore National Laboratory can measure times to explosion, lowest explosion temperatures, and determine kinetic parameters of energetic materials. Samples of different configurations can be tested in the system. The ODTX testing can also generate useful data for determining thermal explosion violence of energetic materials. We also performed detonation experiments of LX-10 in aluminum anvils to determine the detonation violence and validated the Zerilli Armstrong aluminum model. Results of the detonation experiments agreed well with the model prediction.

None