The proposed FELs at CEBAF require an electron source delivering 120 pC bunches at a repetition rate of 7.485 MHz, corresponding to an average current of 0.9 mA. To meet this requirement we will employ a 500 kV DC photoemission electron gun to produce nominal 100 psec bunches of modest peak current. The subsequent injector system will bunch and accelerate this beam, producing 60 A, 2 psec bunches for the FELs. The photoemission gun will use a negative electron affinity GaAs photocathode, which provides good quantum efficiency and an adequate temporal response. The optical beam will be provided by a frequency doubled Nd:YLF laser system, actively mode locked to a subharmonic of the fundamental accelerator frequency. The principal technical difficulties associated with an electron source of this type involve the operating lifetime of the photocathode, and the operation of a high voltage gun in the presence of the alkali metals necessary to produce the photocathode. Various design a

This report describes the 1991 yearly calibration of a gross gamma-ray geophysical pulse logging system owned by the US Department of Energy (DOE) and operated by the Pacific Northwest Laboratory. The calibration was conducted to permit the continued use of this system for geologic and hydrologic studies associated with remedial investigations at the Hanford Site. Primary calibrations to equivalent uranium units were conducted in DOE borehole model standards that reside on the Hanford Site. The calibrations were performed in borehole models SBL/SBH and SBA/SBB, which contain low-equivalent uranium concentrations. Correlations were established based on two similar approaches for relating observed count rate in before- and after-logging field calibrations to equivalent uranium concentrations. A new field source (Ra-20S-82) was fabricated to replace the old source (Ra-20S-204), whose activity led to variable field calibration results previously caused by a nonfixed geometry. A cross-calibration study was performed to compare the operation of the new source relative to the old source. A digitally based collection/recording system was recently acquired, so that many of the procedures were performed with the old analog system and the new digital system to compare the performance of the digital system. 7 refs., 2 figs., 9 tabs.

Photograph of festival director Jo Ann Andera with former directors Claudia Ball and O. T. Baker at the opening ceremony of the 20th annual Texas Folklife Festival. Festival directors are lined up in front, backed by clusters of colorful balloons. On the left, a man is playing a large drum next to a man who is playing an accordion.

The Kohn variational method is one of simplest, and oldest, techniques for performing scattering calculations. Nevertheless, a number of formal problems, as well as practical difficulties associated with the computation of certain required matrix elements, delayed its application to electron--molecule scattering problems for many years. This paper will describe the recent theoretical and computational developments that have made the complex'' Kohn variational method a practical tool for carrying out calculations of low energy electron--molecule scattering. Recent calculations on a number of target molecules will also be summarized. 41 refs., 7 figs.

Acoustic emission is being investigated as a way to continuously monitor the space station Freedom for damage caused by space debris impact and seal failure. Experiments run to date focused on detecting and locating simulated and real impacts and leakage. These were performed both in the laboratory on a section of material similar to a space station shell panel and also on the full-scale common module prototype at Boeing's Huntsville facility. A neural network approach supplemented standard acoustic emission detection and analysis techniques. 4 refs., 5 figs., 1 tab.

This project will demonstrate an advanced thermal coal drying process coupled with physical cleaning techniques to upgrade high-moisture, low-rank coals to produce a high-quality, low-sulfur fuel. The coal will be processed through two vibrating fluidized bed reactors that will remove chemically bound water, carboxyl groups, and volatile sulfur compounds. After drying, the coal will be put through a deep-bed stratifier cleaning process to effect separation of the pyrite rich ash. The process will enhance low-rank western coals, usually with a moisture content of 25--55%, sulfur content of 0.5--1.5%, and heating value of 5500--9000 Btu/lb by producing a stable, upgraded coal product with a moisture content as low as 1%, sulfur content as low as 0.3%, and heating value up to 12,000 Btu/lb. The 45 ton/hr unit will be located adjacent to a unit train loadout facility at Western Energy Company's Rosebud coal mine near the town of Colstrip in southeastern Montana. The demonstration plant is sized at about one-tenth the projected throughput of a multiple processing train commercial facility. The demonstration drying and cooling equipment is currently commercial size.

This project will demonstrate an advanced thermal coal drying process coupled with physical cleaning techniques to upgrade high-moisture, low-rank coals to produce a high-quality, low-sulfur fuel. The coal will be processed through two vibrating fluidized bed reactors that will remove chemically bound water, carboxyl groups, and volatile sulfur compounds. After drying, the coal will be put through a deep-bed stratifier cleaning process to effect separation of the pyrite rich ash. The process will enhance low-rank western coals, usually with a moisture content of 25--55%, sulfur content of 0.5--1.5%, and heating value of 5500--9000 Btu/lb by producing a stable, upgraded coal product with a moisture content as low as 1%, sulfur content as low as 0.3%, and heating value up to 12,000 Btu/lb. The 45 ton/hr unit will be located adjacent to a unit train loadout facility at Western Energy Company`s Rosebud coal mine near the town of Colstrip in southeastern Montana. The demonstration plant is sized at about one-tenth the projected throughput of a multiple processing train commercial facility. The demonstration drying and cooling equipment is currently commercial size.

A review of the use of nitride fuels in liquid metal fast reactors is presented. Past studies indicate that both uranium nitride and uranium/plutonium nitride possess characteristics that may offer enhanced performance, particularly in the area of passive safety. To further quantify these effects, the analysis of a mixed-nitride fuel system utilizing the geometry and power level of the US Advanced Liquid Metal Reactor as a reference is described. 18 refs., 2 figs., 2 tabs.

Photograph of a woman serving aguas frescas at the Texas Folklife Festival in San Antonio, Texas. She wears a red shirt, silver earrings, and a red bow in her hair as she serves up lime aguas frescas in a plastic booth. The drink sales sponsors the Mexican American Business & Professional Women's Club booth.

Photograph of an Alabama-Coushatta dancer at the 20th Annual Texas Folklife Festival in San Antonio, Texas. In the photograph, the young dancer wears traditional Native American clothing such as a feather headdress, a beaded headband, and white moccasins.

Photograph of an Alabama-Coushatta dancer at the 20th Annual Texas Folklife Festival in San Antonio, Texas. In the photograph, the young dancer wears traditional Native American clothing such as a feather headdress, a beaded headband, and white moccasins.

Weekly newspaper from Albany, Texas that includes local, county, and state news along with extensive advertising.

Beam based alignment is being routinely applied in the SLC Final Focus and has proved to be a very useful tool for determining the quality of the zeroth order orbit as defined by various beam line elements. Given the stringent requirement on the beam quality at the interaction point, a well aligned beam line is essential in that it minimizes the confusion which would otherwise arise in the higher order optics, the demand called on the correctors which also serve as optical knobs, and the problem associated with the background radiation. In the SLC final focus we have been relying on an interplay between the field survey and the orbit analysis to achieve this purpose. Mechanical alignment generally provides coordinate information of various beam line elements and offset values inferred from these data and the model of the beam line. Beam based alignment is done mainly by recording the beam orbit under controlled experiment where optical elements or orbit conditions are varied. Due to the complexity of the beamline layout and special power supply configuration in the SLC Final Focus, the latter method is useful only when coupled with off-line analysis which disentangles the data taken at each measurement. In …

Photograph of the Alsatian Dancers at the Texas Folklife Festival in San Antonio, Texas. A group of men, women, and children are wearing traditional Alsatian clothing as they pose for the photo. The men and boys are wearing black wide-brimmed hats and red vests with white shirts. The women are wearing white blouses under black dresses. The oldest woman is wearing a very large Alsatian bonnet.

Daily newspaper from Altus, Oklahoma that includes local, state, and national news along with advertising.

Photograph of Las Americas Folkloric Ballet performing at the 20th Annual Texas Folklife Festival in San Antonio, Texas. The two female dancers wear dark blue leotards and light blue skirts, while the two male dancers wear blue shirts with tan pants. They perform on an outdoor stage in front of festival participants.

The buildings sector used 29.6 quadrillion Btus (quads) of energy in 1989, or 36 percent of the total primary energy consumed in the United States. The major uses are for space heating and cooling, water heating, refrigeration, and lighting. Electricity is the dominant fuel, followed by natural gas, petroleum, and other fuels. Although there were dramatic improvements in energy efficiency in this sector from 1975 to 1985, in recent years energy use has grown rapidly. The large growth expected in commercial building floor space and in residential units means that total building-sector energy consumption could increase dramatically by the year 2030. The mission of the US DOE's Office of Building Technologies (OBT) is to lead a national program supporting private sector efforts to improve the energy efficiency of the nation's buildings and to increase their utilization of renewable energy sources. The Office is also responsible for energy efficiency planning and management for Federal buildings as well as buildings-related associated information, financial incentives, and regulatory functions that are determined to be appropriate for the Federal government. To accomplish its goals, OBT plans and conducts research and development to make technologies available and provides information on their effectiveness. The selection and management …

Paper presented at the 26th IECEC in Boston, MA August 4-9, 1991. This paper describes the various stratagems investigated and discusses their drawbacks and their effectiveness. The analytical results indicated that a combination of relatively modest RTG modifications that could be implemented in time for the mission could come very close to meeting the CRAF power demand goals specified by JPL. However, since even with the modifications the two RTGs did not provide sufficient margin for possible further growth in power demand, the JPL project team ultimately decided to use 3 RTGs for the CRAF mission also. This had the decisive advantage of eliminating the need for load switching to reduce the power demand peaks. The purpose of this paper is to document the various power enhancement schemes analyzed and their computed effectiveness, for possible future applications. There are three copies in the file.

The Bay Farm Borrow Area (BFBA) of San Francisco Bay, California, is under consideration as a dredged-material disposal site by the US Army Corps of Engineers (USACE). As part of the analysis of the site, information is required on the quality of benthic biota, sediment, and water in the BFBA. The objective of this report was to provide data on infauna communities, sediment, and water chemistry from samples collected from the BFBA. The samples were collected, and the data will be analyzed by Science Applications International (SAIC). A total of four samples for sediment chemistry, four samples for water chemistry, and 7 samples for infauna communities were analyzed by the Battelle/Marine Sciences Laboratory (MSL). Water analyses included tests for dissolved organic carbon, total suspended solids, four metals, butyltins, polychlorinated biphenyls (PCBs), chlorinated pesticides, polynuclear aromatic hydrocarbons (PAHs), four phenols, and total phenol. Sediment samples were analyzed for percent solids, total organic carbon, total oil and grease, total petroleum hydrocarbons, grain size, 10 metals, butyltins, PCBs, chlorinated pesticides, PAHs, four phenols, and total phenol. The data along with controls and spike recovery analyses, are presented in tables, and the results are discussed in the text. The quality assurance/quality control criteria were …

This report discusses the following topics on momentum analysis in tokamaks and stellarators: the momentum balance equation; deposition of torque by neutral beams; effects of toroidal rotation; and experimental observations. (LSP)

In the study of geographic disease clusters, an alternative to traditional methods based on rates is to analyze case locations on a transformed map in which population density is everywhere equal. Although the analyst's task is thereby simplified, the specification of the density equalizing map projection (DEMP) itself is not simple and continues to be the subject of considerable research. Here a new DEMP algorithm is described, which avoids some of the difficulties of earlier approaches. The new algorithm (a) avoids illegal overlapping of transformed polygons; (b) finds the unique solution that minimizes map distortion; (c) provides constant magnification over each map polygon; (d) defines a continuous transformation over the entire map domain; (e) defines an inverse transformation; (f) can accept optional constraints such as fixed boundaries; and (g) can use commercially supported minimization software. Work is continuing to improve computing efficiency and improve the algorithm. 21 refs., 15 figs., 2 tabs.

Photograph of Ann Harper preparing food at the Texas Folklife Festival in San Antonio, Texas. Ann wears a blue dress with red trim, a white apron, and a white bonnet. She cuts the rolls in half in preparation to make "bangers," British sausage rolls.

Photograph of Annie Fuller quilting at the Texas Folklife Festival in San Antonio, Texas. Annie, a festival participant from Pittsburg, Texas, sits in a quilting booth as she embroideries a piece of blue fabric.

The appliance use of RCDP-2 homes was analyzed to determine whether significant differences existed in houses that had efficient appliances (domestic hot water (DHW) and refrigerators) compared to those with appliances not considered efficient. Specific analyses addressed: (1) DHW and refrigerator appliance end uses; (2) whole house and space heat energy use; and, (3) interaction effects between appliance use and space heating energy use.