This report is intended to serve as an introduction and primer on a complicated, broad, and often highly technical set of issues.

This multiyear program plan (MYPP) reflects the TFA's plan for the next five fiscal years (FY00-FY04). Most of the planning emphasis is on FY00 and FY01.

Report presenting the use of Von Karman's two-dimensional transonic similarity law as applied to drag data of three different thickness wings with NACA 65-series sections and aspect ratios of 7.6 over a range of Mach numbers. The correlation was found to be satisfactory, with results better in the subsonic range than in the supersonic range.

We develop scalable algorithms and object-oriented code frameworks for terascale scientific simulations on massively parallel processors (MPPs). Our research in multigrid-based linear solvers and adaptive mesh refinement enables Laboratory programs to use MPPs to explore important physical phenomena. For example, our research aids stockpile stewardship by making practical detailed 3D simulations of radiation transport. The need to solve large linear systems arises in many applications, including radiation transport, structural dynamics, combustion, and flow in porous media. These systems result from discretizations of partial differential equations on computational meshes. Our first research objective is to develop multigrid preconditioned iterative methods for such problems and to demonstrate their scalability on MPPs. Scalability describes how total computational work grows with problem size; it measures how effectively additional resources can help solve increasingly larger problems. Many factors contribute to scalability: computer architecture, parallel implementation, and choice of algorithm. Scalable algorithms have been shown to decrease simulation times by several orders of magnitude.

The Ion Doppler Spectrometer instrument on the Sustained Spheromak Physics experiment is described, along with background about it's operation. Results are presented from recent experimental runs, and the data is compared to the results of simple statistical models of heat exchange in two species gasses.

This assessment describes the potential Year 2000 (Y2K) problems and describes the methods for achieving Y2K Compliance for Project W-211, Initial Tank Retrieval Systems (ITRS). The purpose of this assessment is to give an overview of the project. This document will not be updated and any dates contained in this document are estimates and may change. The scope of project W-211 is to provide systems for retrieval of radioactive wastes from ten double-shell tanks (DST). systems will be installed in tanks 102-AP, 104-AP, 105-AN, 104-AN, 102-AZ, 101-AW, 103-AN, 107-AN, 102-AY, and 102-SY. The current tank selection and sequence supports phase I feed delivery to privatized processing plants. A detailed description of system dates, functions, interfaces, potential Y2K problems, and date resolutions can not be described since the project is in the definitive design phase. This assessment will describe the methods, protocols, and practices to assure that equipment and systems do not have Y2K problems.

This paper presents the requirements of a nuclear amplifier of short resolving time, designed to accept pulses of widely varying amplitudes. Data are given which show that a proportional ionization chamber loaded with a 1,000-ohm resistor develops pulses of 0.5 microsecond duration and several volts amplitude. Results indicate that seven basic requirements are imposed on the amplifier when counting soft beta and gamma radiation in the presence of alpha particles, without absorbers. It should, (1) have a fast recovery time, (2) have a relatively good low frequency response, (3) accept pulses of widely varying heights without developing spurious pulsed, (4) have a limiting output stage, (5) preserve the inherently short rise time of the chamber, (6) minimize pulse integration, and (7) have sufficient gain to detect the weak pulses well below the chamber voltage at which continuous discharge takes place. The results obtained with an amplifier which meets these requirements is described. A formula is derived which indicates that redesign of the proportional ionization chamber might eliminate the need for an amplifier. This may be possible if the radioactive particles are collimated parallel to the collecting electrode.

Palladium used at Savannah River (SR) for process tritium storage is currently obtained from a commercial source. In order to understand the processes involved in preparing this material, SR is supporting investigations into the chemical reactions used to synthesize this material. The material specifications are shown in Table 1. An improved understanding of the chemical processes should help to guarantee a continued reliable source of Pd in the future. As part of this evaluation, a work-for-others contract between Westinghouse Savannah River Company and Ames Laboratory (AL) was initiated. During FY98, the process for producing Pd powder developed in 1986 by Dan Grove of Mound Applied Technologies, USDOE (the Mound muddy water process) was studied to understand the processing conditions that lead to changes in morphology in the final product. During FY99 and FY00, the process for producing Pd powder that has been used previously at Sandia and Los Alamos National Laboratories (the Sandia/LANL process) was studied to understand the processing conditions that lead to changes in the morphology of the final Pd product. During FY01, scale-up of the process to batch sizes greater than 600 grams of Pd using a 20-gallon Pfaudler reactor was conducted by the Iowa State University …

None

This report evaluates the impacts assessment and proposed mitigations provided in environmental documents concerning the US Department of Energy`s (DOE) Uranium Mill Tailings Remedial Action (UMTRA) Project. The projected impacts and proposed mitigations identified in UMTRA Project environmental documents were evaluated for two UMTRA Project sites. These sites are Gunnison and Durango, which are representative of currently active and inactive UMTRA Project sites, respectively. National Environmental Policy Act (NEPA) documentation was prepared for the remedial action at Durango and Gunnison as well as for the provision of an alternate water supply system at Gunnison. Additionally, environmental analysis was completed for mill site demolition Gunnison, and for a new road related to the Durango remedial action. The results in this report pertain only to the impact assessments prepared by the Regulatory Compliance staff as a part of the NEPA compliance requirements. Similarly, the mitigative measures documented are those that were identified during the NEPA process.

None

In an effort to gain information on the nature of the photon-meson and photon-nucleon interaction, a study of the artificial production of mesons by photons has been made at the Berkeley synchrotron. The major effort of this research was concentrated on a measurement of the energy and angular distribution of u+-mesons produced when the photons strike a target of liquid hydrogen. Detection of the mesons is accomplished electronically by the technique of delayed coincidence.

None

None

The Advanced Photon Source (APS) is a 7 GeV storage ring light source that has been in operation for well over a decade. In the near future, the ring may be upgraded, including changes to the lattice such as provision of several long straight sections (LSS). Because APS beamlines are nearly fully built out, we have limited freedom to place LSSs in a symmetric fashion. Arbitrarily-placed LSSs will drastically reduce the symmetry of the optics and would typically be considered unworkable. We apply a recently-developed multi-objective direct optimization technique that relies on particle tracking to compute the dynamic aperture and Touschek lifetime. We show that this technique is able to tune sextupole strengths and select the working point in such a way as to recover the dynamic and momentum acceptances. We also show the results of experimental tests of lattices developed using these techniques.

None

Neutron shielding is done to protect workers from excessive radiation and to keep a low neutron background for research in neutron counting. To meet health standards the total neutron flux allowable is 150 n/cm/sec per eight hours, or 50 n/cm/sec per twenty-four hours. Literature values for the absorption coefficients of paraffin and water are considered, and some experimental data is presented which approximately confirm them. A description of barriers at Mound Laboratory is given. Plans for future work on slowing-down of fast nautrons and capture of slow neutrons are included.

This report is a summary of activity on this subcontract during the period from September 1, 1997 through August 30, 1999. The contract entailed the engineering, component tests, system field tests, certification, and preparation for manufacturing the existing Cannon Wind Eagle 300-kW (CWE-300) wind turbine. The CWE 300 is a lightweight, flexible machine with a number of innovative design features that, relative to comparable rigid-hub machines, promises to contribute to reduced capital, installation, and maintenance costs. The architecture of the CWE-300 evolved from earlier wind turbine models developed over several decades. The current design retains many of the desirable features of earlier machines, addresses problems exhibited by those machines, and incorporates further innovative design features.

Annual limits on intake (ALI) have historically been tabulated by the International Commission on Radiological Protection (e.g., ICRP 1979, 1961) and also by the Environmental Protection Agency (EPA 1988). These compilations have been rendered obsolete by more recent ICRP dosimetry methods, and, rather than provide new ALIs, the ICRP has opted instead to provide committed dose coefficients from which an ALI can be determined by a user for a specific set of conditions. The U.S. Department of Energy historically has referenced compilations of ALIs and has defined their method of calculation in its radiation protection regulation (10 CFDR 835), but has never provided a specific compilation. Under June 2007 amendments to 10 CFR 835, ALIs can be calculated by dividing an appropriate dose limit, either 5-rem (0.05 Sv) effective dose or 50 rem (0.5 Sv) equivalent dose to an individual organ or tissue, by an appropriate committed dose coefficient. When based on effective dose, the ALI is often referred to as a stochastic annual limit on intake (SALI), and when based on the individual organ or tissue equivalent limit, it has often been called a deterministic annual limit on intake (DALI).

Report presenting an investigation of the effect of hull length-beam ratio on the hydrodynamic characteristics of flying boats that extend to a length-beam ratio of 20. The results are compared with flying boats having a length-beam ratio of 15. Results regarding longitudinal stability, spray characteristics, take-off performance, taxiing and take-off behavior in waves, landing behavior in waves, and a summary chart are provided.

Diffusion theory and transport theory approaches to the problem of a nuclear reactor with a transverse air gap are compared. It is suggested that the differences in results for thin gaps is due to the fact that diffusion theory does not adequately represent the flux distribution in the immediate vicinity of the gap. For mathematical conveniences previous treatments of the gap problem have made use of fictitious image piles which exaggerate the neutron losses. The extent of the error is estimated by direct neutron leakage calculations.

The nearly energy independence of the DANCE efficiency and multiplicity response to {gamma} rays makes it possible to measure the prompt {gamma}-ray multiplicity distribution in fission. We demonstrate this unique capability of DANCE through the comparison of {gamma}-ray energy and multiplicity distribution between the measurement and numerical simulation for three radioactive sources {sup 22}Na, {sup 60}Co, and {sup 88}Y. The prospect for measuring the {gamma}-ray multiplicity distribution for both spontaneous and neutron-induced fission is discussed.

Report presenting radiation measurements on open propane-air flames to find the extent to which radiant flux intensity can be used to measure the surface area of flames. Turbulent burning velocities calculated using this method and the average surface method are compared. Results regarding the laminar flame intensity measurements at different flow rates and equivalence ratios, filter intensity-ratio method, and surface intensity variations in the flames are provided.

For more than a century, the federal government has constructed water resource projects for a variety of purposes, including flood control, navigation, power generation, and irrigation. While most municipal and industrial water supplies have been built by non-federal entities, most of the large, federal water supply projects in the West, including Hoover and Grand Coulee dams, were constructed by the Bureau of Reclamation (Department of the Interior) to provide water for irrigation.