Summary: Process design and cost estimates for the digestion, leaching and filtration steps of plants which produce 450, 225, and 100 tons of uranium per year are presented in this report.

Abstract: "The ductility of Type 310 stainless steel T-joints brazed with GE-62 brazing alloy was measured at room temperatures 1200, 1650, and 1800 F. The measure of ductility was taken as the plastic axial strain required to crack braze fillets in T-section tensile specimens. At elevated temperatures, the ductility of as-brazed joints approximated that of the stainless steel, but at room temperature the brazed joints had only one-tenth the ductility of the base metal. Annealing for 16 hr at 1800 F in air was found to triple the room-temperature ductility of the brazed joint."

Report describing potential correlations of magnetic susceptibilities of the elements thorium, uranium, and plutonium with their crystal structures.

This report describes the results of a study to determine the mechanical properties of joining stainless steel tubes to stainless steel tube sheets and evaluating the joint types made by various combinations of rolling and welding.

The construction and operation of a fission gas generator, containing about 25 grams of uranium in the form of a powder with a high specific surface, are described in detail. The purpose of the work discussed in this report was to examine the feasibility of producing, separating, and assaying samples of Xe135 in preparation for a proposed measurement of the neutron cross section of this isotope. Krypton and xenon are separated by selective adsorption on charcoal at reduced temperature while iodine is removed by charcoal sorption at room temperature.

The effects of oxidation and irradiation on the microsurface structure of pile graphite have been investigated by measuring the surface area and pore size distribution of several samples. The results obtained for both oxidized and irradiated graphite samples indicate that changes in surface characteristics which occur are determined by the flux, temperature of irradiation, and gaseous atmosphere in which the radiation takes place.

Ionization measurements of water vapor in vapor-liquid equilibrium were made with a series of chambers on a tritiated water sample which was prepared by burning T2 to T2O and diluting it with H2O. A correction was made for the difference of vapor pressures of HTO and H2O. The effect of HTO adsorbed on chamber walls and electrodes was eliminated from the final result. Using Gerbes data on the number of electron volts to produce an ion pair in air, agreement obtained between the measured source strength and the source strength as computed from pressure, temperature, volume, purity, and dilution data on the original gaseous T2 sample.

Discussing evidence of the potential of uranium in Peru

Surveying the northeast Grants district for possible uranium occurrences

Data were obtained in non-flowing and flowing (continuous) batch adsorption systems to serve as a guide to the operating conditions that should be used in a resin-in-pulp adsorption system for the recovery of uranium from ores.

The object of the work done during the month of June has been to assure that deposition of chemically pure chromium metal by gas plating, both by itself, or as a component of nickel-chronium and/or other alloys.

Ultrasonic inspection for subsurface flaws is widely used in American industry. This report reviews the general principles and specific techniques of ultrasonic testing. The information is based on a review of the technical literature plus the experience of the Quality Assurance Department at Sandia Corporation in applying this nondestructive testing technique to quality evaluation programs.