The objective of this paper is to summarize measured resuspension concentrations and to consider the implications of these results. In these experiments, airborne concentrations were measured as functions of wind speed, airborne particle size, wind direction, and the collected-plutonium and other nuclides per gram of airborne soil. Airborne radionuclides were normalized by the total amount of airborne solids to relate concentration per gram of airborne solid to concentration per gram of radionuclide on the ground.

Evaluation of the application of heavy ion accelerators to ignite d-t pellets in a thermonuclear reactor is discussed. Accelerator design requirements considered include transport-limited current, beam injection conditions, and pulse bunching and focusing characteristics. The desirability of resonant and non-resonant accelerating structures is comparatively examined. The required power system switch tubes are discussed. It is concluded that heavy ion accelerators could offer a promising solution to the pellet-igniter problem. The advantages pointed out for this approach include electric efficiency greater than 10 percent, the possibility of high repetition rates (1 to 10 Hz), and a mature technological base. (RME)

A report is given of the activities of the 1977 ISABELLE Summer Workshop, held from July 18 to 29, 1977 at the Brookhaven National Laboratory. An abstract was prepared for each of the seventy-four separate presentations for inclusion in DOE Energy Research Abstracts (ERA). (PMA)

The role of the fusion-fission hybrid reactor (FFHR) as a fissile fuel and/or power producer is discussed. As long range options to supply the world energy needs, hybrid-fueled thermal-burner reactors are compared to liquid metal fast breeder reactors (LMFBR). A discussion of different fuel cycles (thorium, depleted uranium, and spent fuel) is presented in order to compare the energy multiplication, the production of fissile fuel, the laser efficiency and pellet gain requirements of the hybrid reactor. LLL has collaborated with Bechtel Corporation and with Westinghouse on the conceptual design of laser fusion power plants. The neutronic studies of these two designs are discussed. The operational parameters, such as energy multiplication, power density, burn-up and plutonium production as a function of time, are also presented.

The use of basic physical and geometric principles, coupled with current laser technology, seems likely to extend experimental hyperbaric physics investigations from the megabar region into the portions of parameter space in which the ideal (degenerate) Fermi gas approximation is valid for even the highest Z materials. Implosions and speed-multiplying rectilinear stacks of flat plates seem particularly apt techniques for the near-term, transient attainment of pressure of 10/sup 9/ atmospheres in the laboratory, and laser-energized pulsed x-ray ''cameras'' appear suitable for analyzing the basic properties of matter under such conditions.

Separate abstracts were prepared for 30 papers presented.

The half-life of /sup 239/Pu was measured by determining the ingrowth of /sup 235/U during a known time by isotope dilution mass spectrometry techniques.

The design of the prototype neutral beam injection system for TFTR is nearing completion at the Lawrence Livermore Laboratory. This paper describes some of the features of the facility at the Lawrence Berkeley Laboratory where this prototype will be assembled and tested.

Fluid bed densities and levels are usually obtained from measurement of differential pressures between taps with a known vertical separation. Historically, this measurement has been difficult in high pressure coal gasification processes primarily due to plugging of the pressure taps and process instrument tubing. Likewise, the achievement of accurate and reliable pressure and differential pressure recordings is affected by similar circumstances. These typical problems were experienced at the SYNTHANE Pilot Plant at Bruceton which is operated for the U.S. Energy Research and Development Administration by the C.E. Lummus Company. Major changes were required in instrument location and selection, piping configuration, and methods of purging. Consistent and accurate data is now obtained. Recommendations for the installation and operation of such instruments are given.

The absorption of intense laser light is found to be reduced when targets are irradiated by 1.06 ..mu..m light with long pulse widths (150-400 psec) and large focal spots (100-250 ..mu..m). Estimates of Brillouin scatter which account for the finite heat capacity of the underdense plasma predict this reduction. Spectra of the back reflected light show red shifts indicative of Brillouin scattering.

A critical review of the thermal non-equilibrium phase change models applicable to the water reactor safety calculations is presented. Four specific areas are discussed: (1) rapid depressurization (flashing), (2) post-dryout heat transfer, (3) direct contact condensation, and (4) sub-cooled boiling. The models have been judged from a mechanistic viewpoint, and the areas where further work is needed have been pointed out. It is suggested that when a phase change occurs due to a difference in the bulk fluid temperatures, the non-equilibrium phase change process can be viewed as a linear, non-homogeneous thermal relaxation phenomenon. Direct measurements of the actual phase change rates and the interfacial area densities are emphasized. Finally, a recommendation for the volumetric vapor generation rates applicable to the above four specific areas is given.

A conceptual design of a laser fusion power plant is extensively discussed. Recent advances in high gain targets are exploited in the design. A smaller blanket structure is made possible by use of a thick falling region of liquid lithium for a first wall. Major design features of the plant, reactor, and laser systems are described. A parametric analysis of performance and cost vs. design parameters is presented to show feasible design points. A more definitive follow-on conceptual design study is planned. (RME)

The first results are given for the conceptual design of a short-wavelength gas laser system suitable for use as a driver (high average power ignition source) for a commercial laser fusion power plant. A comparison of projected overall system efficiencies of photolytically excited oxygen, sulfur, selenium and iodine lasers is described, using a unique windowless laser cavity geometry which will allow scaling of single amplifier modules to 125 kJ per aperture for 1 ns pulses. On the basis of highest projected overall efficiency, a selenium laser is chosen for a conceptual power plant fusion laser system. This laser operates on the 489 nm transauroral transition of selenium, excited by photolytic dissociation of COSe by ultraviolet fluorescence radiation. Power balances and relative costs for optics, electrical power conditioning and flow conditioning of both the laser and fluorescer gas streams are discussed for a system with the following characteristics: 8 operating modules, 2 standby modules, 125 kJ per module, 1.4 pulses per second, 1.4 MW total average power. The technical issues of scaling visible and near-infrared photolytic gas laser systems to this size are discussed.

The spectral density, S/sub v/(f), of the voltage noise across 1-D current-biased tin films has been measured at the superconducting transition. Each film was freely suspended between two thermal clamps a distance L apart in a vacuum can. A thin layer of lead was evaporated on the outer portion of the films to leave an uncoated middle region of length l. S/sub v/(f) was flat at frequencies below f/sub L/ approximately D/L/sup 2/, where D is the thermal diffusivity. At frequencies between f/sub L/ and f/sub l/ approximately (L/l)/sup 2/f/sub L/ the slope was typically -0.8, while at frequencies above f/sub l/ the slope was somewhat less steep than -1.5. The shape and magnitude of S/sub v/(f) were in good agreement with an equilibrium temperature fluctuation model in which the temperature fluctuations are spatially uncorrelated. Measurements of the autocorrelation function also strongly supported this model. These results are in contrast with those obtained for normal films and films at the superconducting transition supported by substrates, for which a model was required with spatially correlated fluctuations. It is concluded that the 1/f noise for films on substrates is mediated by an interaction between the substrate and the film.

The proceedings of the Materials Sciences Workshop on Phase Transformations, Stability, and Materials Interactions are divided into sections according to the following topics: (I) workshop scope and priorities; (II) study group reports--ERDA mission needs; (III) study group reports--technical area research priorities. (SDF)

Scoping studies were initiated to identify attractive reactor concepts for producing electric power with laser fusion. Several exploratory reactor concepts were developed and are being subjected to our criteria for comparing long-range sources of electrical energy: abundance, social costs, technical feasibility, and economic competitiveness. The exploratory concepts include: a liquid-lithium-cooled stainless steel manifold, a gas-cooled graphite manifold, and fluidized wall concepts, such as a liquid lithium ''waterfall'', and a ceramic-lithium pellet ''waterfall''. Two of the major reactor vessel problems affecting the technical feasibility of a laser fusion power plant are: the effects of high-energy neutrons and cyclical stresses on the blanket structure and the effects of x-rays and debris from the fusion microexplosion on the first-wall. The liquid lithium ''waterfall'' concept is presented here in more detail as an approach which effectively deals with these damaging effects.

The property requirements for breeder reactor fuel cladding materials are extremely stringent. Alloys with low sodium corrosion rates are required to avoid loss of strength from wall thinning at reactor operating temperatures. Data obtained on the following alloys are described: A-286, Inconel 706, Nimonic PE16, AISI 316, M-813 (sintered), Inconel 718, AISI 310, and Alloy 330. Tests were carried out at 700/sup 0/C for 2000 hours at a sodium velocity of 6 m/s and an oxygen content in sodium of 1 ppM. Corrosion rates and major elements depleted are tabulated. It is concluded that A-286, Inconel 706, and Nimonic PE16 are highly promising commercial alloys for cladding purposes on the basis of corrosion resistance. 5 figures, 1 table. (RWR)

An air sampling system was developed that merged the useful properties of solid adsorbers, vacuum cleaner air movers, and Civil Defense GM survey meters. The system can be used to monitor the environmental levels of /sup 131/I produced by release from containment accidents in nuclear power reactors.

In order to demonstrate the practicality of the multi-band method (Cullen, Nucl. Sc. Eng., 55, 387 (1974)) as applied to all energy ranges, it is demonstrated that intermediate resonance effects may be included; usually only two or three, and at most four, bands are required in any cross section probability table; and a low-order rational approximation is an excellent means of defining Bonderenko sigma/sub 0/ self-shielded cross sections. 1 table.

A uranium mill tailings pile at Grants, New Mexico, was selected for wind erosion research since the configuration provides flat area containing fine sand and made up of larger particles. The wind erosion experiment is discussed. Experimental equipment consists of meteorological instrumentation to automatically activate air samplers as a function of wind speed increments and direction, particle cascade impactors to measure airborne respirable concentrations as a function of particle size, inertial impaction devices to measure nonrespirable fluxes of airborne particles, a virtual particle cascade impactor to measure airborne concentrations of toxic trace elements, and soil depth gauges to measure changes in surface soil elevations as a function of time. Both radioactive particles as well as toxic trace element concentrations are measured. Radioactive particles are measured with both particle cascade impactors as well as high-volume air samplers. In contrast, toxic trace element airborne concentrations are measured only with a two-stage virtual particle cascade impactor. Fluxes of nonrespirable airborne particles are measured with inertial impaction devices. At particle cascade impactor sites, a rotating cyclone preseparator collects nonrespirable particles. In addition at all sites, fluxes of nonrespirable particles are measured using an open cavity inertial impaction device. (JGB)

A model for interfacial cohesion is developed which describes the loss in the strength of an interface due to the segregation and adsorption of impurities on it. Distinctions are made between interface separations that occur too rapidly for any significant redistribution of adsorbing matter to take place and separations that are slow enough to allow full adsorption equilibrium. Expressions for the total work of complete decohesion are presented for both cases. The results are applied to well-known model adsorption isotherms and some experimental data for grain boundary adsorption of phosphorus in iron is analyzed with respect to the losses in intergranular cohesion.

Radioactive waste is encountered at every step of the LWR fuel cycle, and health physics is needed in the management of these wastes. Environmental surveillance will be needed. Health physics analysis supports the program to put radioactive waste in deep geologic isolation. The role of the health physicist in public interaction and communications is discussed. (DLC)

The conference contained 39 papers. Separate abstracts were prepared for 29 papers. The other ten abstracts appeared previously in ERA. (JFP)

Some of the problems to be encountered in the possible large scale use of dye lasers in an isotope separation plant are discussed.The effect of laser dye deterioration on performance is examined algebraically in terms of disappearance of dye molecules and the appearance of a new, single chemical product having absorption in the fluorescence band for a single pass through a transversely pumped amplifier. Loss of output, defined as ''quantum yield of laser deterioration'', Q/sub L/, is related to the true quantum yield of molecular destruction of the dye Q/sub M/, and other known parameters. 6-Diethylamino 3-keto fluoran, an example of an oxygen tricyclic merocyanine, is described. It was first reported in the pre-1900 German literature under the name of Chromogen Red B and it is an ineffective lasing dye on account of low fluorescence quantum yield. The techniques for measurement and the excited state absorption cross-sections are reported for the dyes rhodamine 6G fluoroborate in alcohol, rhodamine B basic solution in trifluoroethanol and kiton red S in trifluoroethanol.