A sodalite/glass ceramic waste form has been developed to immobilize highly radioactive nuclear wastes in chloride form, as part of an electrochemical cleanup process. Simulated waste forms have been fabricated which contain plutonium and are representative of the salt from the electrometallurgical process to recover uranium from spent nuclear fuel. X-ray absorption fine structure spectroscopy (XAFS) and x-ray absorption near-edge spectroscopy (XANES) studies were performed to determine the location, oxidation state and form of the plutonium within these waste forms. Plutonium, in the non-fission-element case, was found to segregate as plutonium(IV) oxide with a crystallite size of at least 20 nm. With fission elements present, the crystallite size was about 2 nm. No plutonium was observed within the sodalite or glass in the waste form.

Modern HENP experiments such as CMS and Atlas involve as many as 2000 collaborators around the world. Collaborations this large will be unable to meet often enough to support working closely together. Many of the tools currently available for collaboration focus on heavy-weight applications such as videoconferencing tools. While these are important, there is a more basic need for tools that support connecting physicists to work together on an ad hoc or continuous basis. Tools that support the day-to-day connectivity and underlying needs of a group of collaborators are important for providing light-weight, non-intrusive, and flexible ways to work collaboratively. Some example tools include messaging, file-sharing, and shared plot viewers. An important component of the environment is a scalable underlying communication framework. In this paper we will describe our current progress on building a dynamic and ad hoc collaboration environment and our vision for its evolution into a HENP collaboration environment.

Ultraviolet resonance Raman spectroscopy (UVRRS) using 244nm excitation was used to investigate the impact of aging on humandentin. The intensity of a spectroscopic feature from the peptide bondsin the collagen increases with tissue age, similar to a finding reportedpreviously for human cortical bone.

This report provides a technical basis for estimating the level of corrosion products in materials stored in DOE-STD-3013 containers based on extrapolating available chemical sample results. The primary focus is to estimate the levels of nickel, iron, and chromium impurities in plutonium-bearing materials identified for disposition in the United States Mixed Oxide fuel process.

It is known that filtered cathodic-arc-deposited ta-C films have outstanding properties even within the family of diamondlike materials. However, filtering of macroparticles is usually incomplete or accompanied by significant plasma losses. Ongoing research effort is directed towards the following goals: (1) complete elimination of macro- and nanoparticles from the vacuum arc plasma, (2) increase of plasma utilization in the cathodic-arc and macroparticle-filter system, (3) precise control and reproducibility of film deposition, and (4) synthesis of ultrathin films (< 5 nm) that meet requirements of the magnetic storage industry. The development of new filters, in particular the ''Twist Filter'', enables cathodic arc plasma deposition to synthesize ultrathin ta-C films of 3 nm on heads that pass corrosion and other relevant tests. We describe the Twist Filter system and report about recent ta-C tests results. In light of these results, even thinner films seem to be possible.

As a result of the Safeguards Arrangement between the US Department of Energy (DOE) and the Australian Safeguards and Non-Proliferation Office (ASNO) concerning international safeguards R and D, ASNO and Sandia National Laboratories (SNL) have agreed to jointly develop a remote monitoring system at the HIFAR reactor, Lucas Heights, Australia. The HIFAR reactor is a high flux research reactor operated by the Australian Nuclear Science and Technology Organization (ANSTO). The objective of the system is to remotely monitor the entire Material Balance Area (MBA) AS-A to include: fresh fuel the reactor core; spent fuel in the cropping/irradiation pond, international pond, dry spent fuel storage facility, and Dounreay flasks; and spent fuel during designated transport. The purpose is to reduce on-site inspection effort at the HIFAR reactor.

The authors present improved measurements of the branching fraction {Beta}, the longitudinal polarization fraction f{sub L}, and the direct CP asymmetry A{sub CP} in the B meson decay channel B{sup +} {yields} {rho}{sup +}{rho}{sup 0}. The data sample was collected with the BABAR detector at SLAC. The results are {Beta}(B{sup +} {yields} {rho}{sup +}{rho}{sup 0}) = (23.7 {+-} 1.4 {+-} 1.4) x 10{sup -6}, f{sub L} = 0.950 {+-} 0.015 {+-} 0.006, and A{sub CP} = -0.054 {+-} 0.055 {+-} 0.010, where the uncertainties are statistical and systematic, respectively. Based on these results, they perform an isospin analysis and determine the CKM weak phase angle {alpha} to be (92.4{sub -6.5}{sup +6.0}){sup 0}.

Optically activated, high gain GaAs switches are being tested for many different applications. TWO such applications are ground penetrating radar (GPR) and firing set switches. The ability of high gain GaAs Photoconductive Semiconductor Switches (PCSs) to deliver fast risetime pulses makes them suitable for their use in radars that rely on fast impulses. This type of direct time domain radar is uniquely suited for the detection of buried items because it can operate at low frequency, high average power, and close to the ground, greatly increasing power on target. We have demonstrated that a PCSs based system can be used to produce a bipolar waveform with a total duration of about 6 ns and with minimal ringing. Such a pulse is radiated and returns from a 55 gallon drum will be presented. For firing sets, the switch requirements include small size, high current, dc charging, radiation hardness and modest longevity. We have switched 1 kA at 1 kV and 2.8 kA at 3 kV dc charge.

A complete edge-weighted directed graph on vertices 1,2,...,n that assigns cost c(i,j) to the edge (i,j) is called Monge if its edge costs form a Monge array, i.e., for all i < k and j < l, c[i, j]+c[k,l]{le} < c[i,l]+c[k,j]. One reason Monge graphs are interesting is that shortest paths can be computed quite quickly in such graphs. In particular, Wilber showed that the shortest path from vertex 1 to vertex n of a Monge graph can be computed in O(n) time, and Aggarwal, Klawe, Moran, Shor, and Wilber showed that the shortest d-edge 1-to-n path (i.e., the shortest path among all 1-to-n paths with exactly d edges) can be computed in O(dn) time. This paper`s contribution is a new algorithm for the latter problem. Assuming 0 {le} c[i,j] {le} U and c[i,j + 1] + c[i + 1,j] {minus} c[i,j] {minus} c[i + 1, j + 1] {ge} L > 0 for all i and j, our algorithm runs in O(n(1 + 1g(U/L))) time. Thus, when d {much_gt} 1 + 1g(U/L), our algorithm represents a significant improvement over Aggarwal et al.`s O(dn)-time algorithm. We also present several applications of our algorithm; they include length-limited Huffman coding, finding the …

The authors present results from a calculation of f{sub B} and f{sub B{sub s}} in the quenched approximation. The heavy quark is simulated using an O(1/M{sup 2}) improved NRQCD action, and the tadpole improved clover action is used for the light quarks. The axial current includes the O(1/M) corrections in one-loop perturbation theory and the O(1/M{sup 2}) ones at tree-level. The authors find f{sub B}=152(11)({sup +8}{sub {minus}12})(9)(6) MeV, f{sub B{sub s}}=181(8)({sup +7}{sub {minus}0})(11)(7)({sup +7}{sub {minus}0}) and f{sub B{sub s}}/f{sub B}=1.20(4)({sup +4}{sub {minus}0}), where, in each case, the first error is statistical and the rest are various systematics.

The authors extend the application of vector and axial Ward identities to calculate b{sub A}, b{sub P} and b{sub T}, coefficients that give the mass dependence of the renormalization constants of the corresponding bilinear operators in the quenched theory. The extension relies on using operators with non-degenerate quark masses. It allows a complete determination of the O(a) improvement coefficients for bilinears in the quenched approximation using Ward Identities alone. Only the scale dependent normalization constants Z{sub P}{sup 0} (or Z{sub S}{sup 0}) and Z{sub T} are undetermined. The authors present results of a pilot numerical study using hadronic correlators.

Long-range seismic profiles from Peaceful Nuclear Explosions (PNE) in the Former Soviet Union (FSU) provide a unique data set to investigate several important issues in regional Comprehensive Nuclear-Test-Ban Treaty (CTBT) monitoring. The recording station spacing ({approx}15 km) allows for extremely dense sampling of the propagation from the source to {approx} 3300 km. This allows us to analyze the waveforms at local, near- and far-regional and teleseismic distances. These data are used to: (1) study the evolution of regional phases and phase amplitude ratios along the profile; (2) infer one-dimensional velocity structure along the profile; and (3) evaluate the spatial correlation of regional and teleseismic travel times and regional phase amplitude ratios. We analyzed waveform data from four PNE's (m{sub b} = 5.1-5.6) recorded along profile KRATON, which is an east-west trending profile located in northern Sibertil. Short-period regional discriminants, such as P/S amplitude ratios, will be essential for seismic monitoring of the Comprehensive Nuclear-Test-Ban Treaty (CTBT) at small magnitudes (m{sub b} &lt; 4.0). However, P/S amplitude ratios in the short-period band, 0.5-5.0 Hz, show some scatter. This scatter is primarily due to propagation and site effects, which arise from variability in the elastic and anelastic structure of the crustal waveguide. …

None

Two novel Group IV precursors, titanium (IV) neo-pentoxide, [Ti({mu}-ONep)(ONep){sub 3}]{sub 2} (l), and zirconium (IV) neo-pentoxide, [Zr({mu}-ONep)(ONep){sub 3}]{sub 2} (2), were reported to possess relatively high volatility at low temperatures. These compounds were therefore investigated as MOCVD precursors using a lamp-heated cold-wall CVD reactor and direct sublimation without carrier gas. The ONep derivatives proved to be competitive precursors for the production of thin films of the appropriate MO{sub 2} (M = Ti or Zr) materials in comparison to other metallo-organic precursors. Compound 1 was found to sublime at 120 C with a deposition rate of {approximately}0.350 {mu}m/min onto a substrate at 330 C forming the anatase phase with &lt; 1% residual C found in the final film. Compound 2 was found to sublime at 160 C and deposited as crystalline material at 300 C with &lt; 1% residual C found in the final film. A comparison to standard alkoxide and {beta}-diketonates is presented where appropriate.

A key uncertainty in models of the global carbonate-silicate cycle and long-term climate is the way that silicates weather under different climatologic conditions, and in the presence or absence of organic activity. Digital imaging of basalts in Hawaii resolves the coupling between temperature, rainfall, and weathering in the presence and absence of lichens. Activation energies for abiotic dissolution of plagioclase (23.1{+-} 2.5 kcal/mol) and olivine (21.3 {+-} 2.7 kcal/mol) are similar to those measured in the laboratory, and are roughly double those measured from samples taken underneath lichen. Abiotic weathering rates appear to be proportional to rainfall. Dissolution of plagioclase and olivine underneath lichen is far more sensitive to rainfall.

This article investigates the use of synthetic data for the annotation and automated extraction of family history information relating to cases of cardiac disease from Norwegian clinical text. This work assesses the validity and applicability of the annotated synthetic corpus using machine learning techniques. The methodology outlined in this article may be useful in other situations where limited availability of clinical text hinders NLP tasks.

There is a considerable interest to develop new time-of-flight detectors using, for example, micro-channel-plate photodetectors (MCP-PMTs). The question we pose in this paper is if new waveform digitizer ASICs, such as the WaveCatcher and TARGET, operating with a sampling rate of 2-3 GSa/s can compete with 1GHz BW CFD/TDC/ADC electronics. We have performed a series of measurements with these waveform digitizers coupled to MCP-PMTs operating at low gain and with a signal equivalent to {approx}40 photoelectrons. The tests were done with a laser diode on detectors operating under the same condition used previously in SLAC and Fermilab beam tests. Our test results indicate that one can achieve similar resolution with both methods. Although the commercial CFD-based electronics does exist and performs very well, it is difficult to implement on a very large scale, and therefore the custom electronics is needed. In addition, the analog delay line requirement makes it very difficult to incorporate CFD discriminators in ASIC designs.

None

This discussion outlines a few areas of fundamental research which appear vital for progress in developing advanced propulsion concepts using dc railgun thrusters. We have placed emphasis on the following: (1) dense plasma and high current density influences on changes in microstructure and properties of conventional rail conductors such as Cu, Al, and W alloys or composites; (2) the influences described in (1) on more advanced high temperature, microstrain resistant, materials such as amorphous tungsten; (3) location, description and temporal evolution of current, magnetic field, and losses during intense plasma-current field interactions with conductors; and (4) composite materials and sequentially sectioned structures for more efficient EM dc launcher configuration.

A general review of the technical merits of nuclear thermal rocket clustering is presented. A summary of previous analyses performed during the Rover program is presented and used to assess clustering in the context of projected Space Exploration Initiative missions. A number of technical issues are discussed including cluster reliability, engine-out operation, neutronic coupling, shutdown core power generation, shutdown reactivity requirements, reactor kinetics, and radiation shielding. 7 refs., 3 figs., 2 tabs.

The miscibility of polypropylene (PP) melts in which the chains differ only in stereochemical composition has been investigated by two different procedures. One approach used detailed local information from a Monte Carlo simulation of a single chain, and the other approach takes this information from a rotational isomeric state model devised decades ago, for another purpose. The first approach uses PRISM theory to deduce the intermolecular packing in the polymer blend, while the second approach uses a Monte Carlo simulation of a coarse-grained representation of independent chains, expressed on a high-coordination lattice. Both approaches find a positive energy change upon mixing isotactic PP (iPP) and syndiotactic polypropylene (sPP) chains in the melt. This conclusion is qualitatively consistent with observations published recently by Muelhaupt and coworkers. The size of the energy chain on mixing is smaller in the MC/PRISM approach than in the RIS/MC simulation, with the smaller energy change being in better agreement with the experiment. The RIS/MC simulation finds no demixing for iPP and atactic polypropylene (aPP) in the melt, consistent with several experimental observations in the literature. The demixing of the iPP/sPP blend may arise from attractive interactions in the sPP melt that are disrupted when the sPP …

This article creates a well-defined architecture for functional materials composed of spontaneously self-assembled electron donor and acceptor entities capable of generating long-lived charge-separated states upon photoillumination and reports the synthesis of a new fullerene–bis-Zn-porphyrin e-bisadduct by tether-directed functionalization of C60 via a multistep synthetic protocol.

We have investigated the effect of high-temperature superconductor (HTS) films deposited on substrates that are placed above bulk HTSs in an attempt to reduce rotational drag in superconducting bearings composed of a permanent magnet levitated above the film/bulk HTS combination. According to the critical state model, hysteresis energy loss is inversely proportional to critical current density, J{sub c}, and because HTS films typically have much higher J{sub c} than that of bulk HTS, the film/bulk combination was expected to reduce rotational losses by at least one order of magnitude in the coefficient of fiction, which in turn is a measure of the hysteresis losses. We measured rotational losses of a superconducting bearing in a vacuum chamber and compared the losses with and without a film present. The experimental results showed that contrary to expectation, the rotational losses are increased by the film. These results are discussed in terms of flux drag through the film, as well as of the critical state model.

Considerable attention has been paid over the years to the problem of growing high purity KDP and KD*P to meet damage threshold requirements of ICF lasers at LLNL. The maximum fluence requirement for KD*P triplers on the National Ignition Facility (NIF) is 14.3 J/cm² at 351 nm in a 3 ns pulse. Currently KD*P (conventional or rapid grown) cannot meet this requirement without laser (pre)conditioning. In this overview, recent experiments to understand laser conditioning and damage phenomena in KDP and KD*P will be discussed. These experiments have lead to a fundamental revision of damage test methods and test result interpretation. In particular, the concept of a damage threshold has given way to measuring performance by damage distributions using millimeter sixed beams. Automated R/l (conditioned) damage tests have shown that the best rapidly grown KDP crystals exhibit the same damage distributions at the best conventionally grown KD*P. Continuous filtration of the growth solution and post growth thermal sealing are shown to increase the damage performance as well. In addition, centimeter size beams from multijoule lasers have been used to study stepwise laser conditioning in KDP. These tests have shown that an increase in the damage threshold of ~1.5X is attainable with …