Resource Type
Serial/Series Title
Atomic Energy Commission Reports
39
GJBX
30
United States Department of Energy Grand Junction Office Reports
20
NACA Research Memorandums
19
AEC research and development report
11
TID
6
North American Aviation Reports
5
Brookhaven National Laboratory Reports
4
HW (Series)
4
Hanford Works Reports
4
34 More
Country
103 Matching Results
Results open in a new window/tab.
Results:
1 - 24 of
103
next
Shipboard Cobalt-60 Radiopasteurizer for Marine Products
Report issued by the Brookhaven National Laboratory discussing the shipboard cobalt-60 irradiator. As stated in the introduction, "this report discusses the conceptual design of a cobalt-60 shipboard irradiator for use to improve the keeping quality of fish landed aboard commercial fishing trawlers operating out of ports along the eastern seaboard of the commercial United States" (p. 1). This report includes tables, and illustrations.
Date:
June 30, 1963
Creator:
Manowitz, B.; Kuhl, A. O.; Galanter, L.; Armel, J.; Black, K. M.; Klaassen, W. J. et al.
Object Type:
Report
System:
The UNT Digital Library
Zirconium Pheylarsonate Tracer Scale Method for the Differentiation of Pu(III) and Pu(IV) in Redox Solutions
The following report studies an estimation of the amount of Pu(III) and Pu(IV) present in the IBP Stream, with the purpose of establishing an analytical, method suitable for routine control analysis. A method is discussed that is based on carrying Pu(IV) upon a zirconium phanylarsonate precipitate.
Date:
June 30, 1948
Creator:
Ice, C. H.
Object Type:
Report
System:
The UNT Digital Library
Quarterly Progress Report on Refining of MgX and Other Uranium-Bearing Materials
From abstract: "Results are presented of Scheibel column extraction tests with neutral ether on a variety of combinations of feed solutions...The effect of added iron was evaluated for a considerable number of process solutions and slurries. Arsenic was traced through both primary and secondary extraction stages in one test."
Date:
June 30, 1951
Creator:
Ewing, R. A.; Kiehl, S. J., Jr.; Bearse, A. E. & Sharpe, R. E.
Object Type:
Report
System:
The UNT Digital Library
Determination of Rare Earths in Refined Uranium : Topical Report
Abstract: "Rare-earth analyses were performed on several samples of refined uranium oxide and nitrate, using a modified cellulose column procedure. Rare earths were not detectable in samples of 0.03 shotgun of less. Detection limits were from 0.0005 to 0.015 ppm. Negligible quantities of low-cross-section rare earths were found in less pure uranium samples, obtained during start-up operations of the pilot plant at the Feed Materials Production Center, primarily those rare earths of greater than average abundance in nature. No correlation was found between rare-earth content and shotgun values. Rare earths do not appear to be contributing significantly to the neutron absorption of refined uranium. A modified cellulose column procedure, which includes a preconcentration solvent-extraction step, is described. Radioactive tracer tests indicating rare-earth recoveries by the method of >98 per cent are reported."
Date:
June 30, 1953
Creator:
Ewing, R. A. & Bearse, A. E.
Object Type:
Report
System:
The UNT Digital Library
Progress Report on the Concentration of Pitchblende
Abstract: "Additional work on the flotation of sulphides from high-sulphur pitchblende is described. Data needed for the selection of flotation equipment are presented."
Date:
June 30, 1950
Creator:
Wesner, A. L.; Tangel, O. F. & Richardson, A. C.
Object Type:
Report
System:
The UNT Digital Library
World Distribution of Soil, Rock, and Vegetation
Introduction: The objective of the study was to estimate the worldwide distribution of a few broad categories of naturally occurring materials found on the land surface of the earth.
Date:
June 30, 1965
Creator:
Goldberg, Jerald M.; Fosberg, F. Raymond; Sachet, Marie-Hélène & Reimer, Allen
Object Type:
Report
System:
The UNT Digital Library
The Nuclear Ramjet Propulsion System
The following report describes the workings and development of the nuclear ramjet propulsion systems.
Date:
June 30, 1959
Creator:
Merkle, Theodore C.
Object Type:
Report
System:
The UNT Digital Library
Engineering Evaluation Studies: Heavy Water Moderated Power Reactor Plants
Foreword: This report describes results of a series of evaluation and design studies conducted between July 1, 1960 and June 30, 1961, related to heavy water moderated power reactor plants.
Date:
June 30, 1961
Creator:
Chittenden, W. A. & Hoveke, G. F.
Object Type:
Report
System:
The UNT Digital Library
Engineering Evaluation Studies: Heavy Water Moderated Power Reactor Plants
Foreword: This report describes the results of a series of engineering evaluation studies conducted between July 1, 1961 and June 30, 1962, related to heavy water moderated power reactor plants.
Date:
June 30, 1962
Creator:
Chittenden, W. A. & Hoveke, G. F.
Object Type:
Report
System:
The UNT Digital Library
Evaluation and Design Heavy Water Moderated Power Reactor Plants
From foreword: This report investigates the economics and performance of alternate cycles for heavy water moderated power reactors.
Date:
June 30, 1960
Creator:
unknown
Object Type:
Report
System:
The UNT Digital Library
Video Processing of Remote Sensor Data Applied to Uranium Exploration in Wyoming: Final Report
From introduction: This study is a comprehensive investigation of altered sandstone associated with uranium deposits near Pumpkin Buttes in the Powder River Basin of Wyoming, and the detection of such alteration using remote sensing technology. The purpose of this study is two-fold: 1) to develop video image processing techniques that will preferentially enhance areas of alteration associated with uranium deposits and enable mapping of these areas, and 2) to investigate the spectral, geochemical, and mineralogical characteristics of altered areas which make them detectable on remote sensor data. Once these video processing techniques have been defined, they may be applied as exploration tools to new areas with similar surface and geological environments. In this way, remote sensing can serve as a valuable tool for uranium exploration.
Date:
June 30, 1979
Creator:
Levinson, Richard A.; Marrs, Ronald W. & Crockell, Fred
Object Type:
Report
System:
The UNT Digital Library
OMR (Piqua) Unitized Control-Safety Rod Prototype Tests
Abstract: A unitized magnetic jack driven control-safety rod has been developed for the 45.5 thermal megawatt organic moderated reactor (Piqua).
Date:
June 30, 1960
Creator:
Howell, J. D. & Weeks, C. C.
Object Type:
Report
System:
The UNT Digital Library
A Rotary Kiln for the Controlled Oxidation of UC
Abstract: A rotary kiln was evaluated for the controlled oxidations of UC.
Date:
June 30, 1965
Creator:
Strausberg, S.
Object Type:
Report
System:
The UNT Digital Library
Calandria Core Weld Joint Development
Abstract: The design and initial test of cutting and welding equipment developed to remotely cut and re-weld the bottom process tube joint are discussed in this report.
Date:
June 30, 1965
Creator:
Roberts, J. G.
Object Type:
Report
System:
The UNT Digital Library
Hydrogeochemical and Stream Sediment Reconnaissance Basic Data for Rapid City NTMS Quadrangle, South Dakota
The following report provides results from a geochemical survey for Rapid City, South Dakota. Field and laboratory data are presented for 417 groundwater and 447 stream sediment samples.
Date:
June 30, 1980
Creator:
National Uranium Resource Evaluation Program
Object Type:
Report
System:
The UNT Digital Library
Final Safety Analysis Report: SNAP 1A Radioisotope Fueled Themonuclear Generator
The following report is the final safety analysis report for the Task 2 Radioisotope Powered Thermoelectric Generator prepared by The Martin Company. It presents analyses, tests and evaluation of the operational safety criteria for the generator.
Date:
June 30, 1960
Creator:
Dix, George P.
Object Type:
Report
System:
The UNT Digital Library
Removal of secondary-flow accumulations in a two-dimensional turbine nozzle passage by boundary-layer bleed
Report presenting an investigation of boundary-layer bleed through a slot placed at the juncture of the suction surface and end wall to determine whether bleed in this manner could be used to prevent the local accumulation of boundary-layer fluids due to secondary flows. Results regarding the effect of bleed pressure, effect of bleed-slot height, and effect of slot length and position are provided.
Date:
June 30, 1955
Creator:
Wong, Robert Y.
Object Type:
Report
System:
The UNT Digital Library
Generalized Indical Forces on Deforming Rectangular Wings in Supersonic Flight
"A method is presented for determining the time-dependent flow over a rectangular wing moving with a supersonic forward speed and undergoing small vertical distortions expressible as polynomials involving spanwise and chordwise distances. The solution for the velocity potential is presented in a form analogous to that for steady supersonic flow having the familiar "reflected area" concept discovered by Evvard. Particular attention is paid to indicial-type motions and results are expressed in terms of generalized indicial forces. Numerical results for Mach numbers equal to 1.1 and 1.2 are given for polynomials of the first and fifth degree in the chordwise and spanwise directions, respectively, on a wing having an aspect ratio of 4" (p. 595).
Date:
June 30, 1954
Creator:
Lomax, Harvard; Fuller, Franklyn B. & Sluder, Loma
Object Type:
Report
System:
The UNT Digital Library
Experimental investigation of free-convection heat transfer in vertical tube at large Grashof numbers
Report presents the results of an investigation conducted to study free-convection heat transfer in a stationary vertical tube closed at the bottom. The walls of the tube were heated, and heated air in the tube was continuously replaced by fresh cool air at the top. The tube was designed to provide a gravitational field with Grashof numbers of a magnitude comparable with those generated by the centrifugal field in rotating-blade coolant passages (10(8) to 10(13)). Local heat-transfer coefficients in the turbulent-flow range and the temperature field within the fluid were obtained.
Date:
June 30, 1952
Creator:
Eckert, E. R. G. & Diaguila, A. J.
Object Type:
Report
System:
The UNT Digital Library
Comparison of performance of experimental and conventional cage designs and materials for 75-millimeter-bore cylindrical roller bearings at high speed
From Summary: "The results of two investigations, one to determine the relative merits of four experimental and two conventional design 75-millimeter-bore (size 215) cylindrical roller bearings and one to determine the relative merits of nodular iron and bronze as cage materials for this size and type of bearing, are presented in this report. Nine test bearings were operated over a range of dn values (product of bearing bore in mm and shaft speed in r.p.m) from 0.3 x 10(6) to 2.3 x 20(6), radial loads for 7 to 1613 pounds, and oil flows from 2 to 8 pounds per minute with a single-jet circulatory oil feed. Of the six bearings used to evaluate designs, four were experimental types with outer-race-riding cages and inner-race-guided rollers, and two were conventional types, one with outer-race-guided rollers and cage and one with inner-race-guided rollers and cage."
Date:
June 30, 1954
Creator:
Anderson, William J.; Macks, E. Fred & Nemeth, Zolton N.
Object Type:
Report
System:
The UNT Digital Library
Experimental Investigation at High Subsonic Speeds of the Rolling-Stability Derivatives of a 1/22 Scale Model of the Republic F-105 Airplane
Report presenting an investigation of the rolling-stability derivatives for a model of the Republic F-105 airplane over a range of Mach numbers and angles of attack. The model retained damping in roll through the test ranges, but values of the damping varied considerably with angles of attack. Derivatives of yawing moment and lateral force due to rolling generally followed previously indicated trends.
Date:
June 30, 1955
Creator:
Sleeman, William C., Jr. & Hayes, William C., Jr.
Object Type:
Report
System:
The UNT Digital Library
Investigation of the Static Stability Characteristics of Five Hypersonic Missile Configurations at Mach Numbers From 2.29 to 4.65
Report presenting an investigation to determine the static stability characteristics of five hypersonic missile configurations. Testing was performed at a range of Mach and Reynolds numbers. Results regarding the effect of base block, longitudinal stability, directional stability, and Reynolds number effect are provided.
Date:
June 30, 1958
Creator:
Turner, Kenneth L. & Appich, W. H., Jr.
Object Type:
Report
System:
The UNT Digital Library
Low-Temperature Chemical Starting of a 200-Pound-Thrust JP-4 - Nitric Acid Rocket Engine Using a Three-Fluid Propellant Valve
Low-temperature chemical starting of combined JP-4 nitric acid propellant for low-thrust rocket engine using three-fluid propellant valve.
Date:
June 30, 1955
Creator:
Hennings, Glen & Morrell, Gerald
Object Type:
Report
System:
The UNT Digital Library
Heat-transfer and operating characteristics of aluminum forced-convection and stainless-steel natural-convection water-cooled single-stage turbines
Report presenting testing of two water-cooled turbines, one of aluminum alloy using forced-convection cooling and one of stainless steel using natural-convection cooling, to obtain heat-transfer and general operating data like blade temperatures, coolant-flow rates, and coolant pumping losses. Results regarding outside and inside heat-transfer results, coolant pumping power, general operating results, and practical considerations for both are provided.
Date:
June 30, 1950
Creator:
Freche, John C. & Diaguila, A. J.
Object Type:
Report
System:
The UNT Digital Library